This works on other Casio models as well, I just tested it on six different models and some have multiple display testing modes. It even works on my old Tri-Graph model.
@99arsenii
4 жыл бұрын
The last combination works even on older 2515 module which is not even G-Shock, so I think this combination is general for all digital Casio watches. Extremely useful for someone who would buy these used to see if the display is alright
@TheChadWork2001
2 жыл бұрын
This was an interesting video but you were not clear with which buttons to press. We can't see what you are pressing. I followed one or of three examples.
@batmanarkham5120
7 жыл бұрын
Nice video. Different from traditional reviews
@Sturnburn772
5 жыл бұрын
This was cool. Works on the G-5600E as well.
@amoledzeppelin
7 жыл бұрын
You forgot Mode + Set+ + Set-. Test reception in different radio modes. Set+ scrolls, set- tests. It has: J 40 - Japan, J 60 - Japan, U 60 - USA, G 77 - Germany, L 60 - UK, and then something strange: B 01, D 02, G 03 and T 04. Some of these is Chinese, but what are the other 3? I honestly don't know. Please someone respond who knows. Same thing is with AWG-M100B. And I've successfully corrected my watch with this mode by selecting reception on J 40 and running JJY Simulator on Android without changing my home city. But the actual timezone was messed up. I got JOK and then just returned to timekeeping mode. It showed the correct local time but corresponding to what's assumed to be in Tokyo lol.
@byfuel
4 жыл бұрын
The Chinese time signal is B01.
@brunosco
3 жыл бұрын
Indeed! You need to start by pressing SET+ first, though (at least not mode first).
@alhapponyful
4 жыл бұрын
I'm wearing G shock mudmaster for the last 5 years , and i have no aida about those hidden features Thank you sir
@shlumpclump1264
3 жыл бұрын
what is aida
@ofb923
Жыл бұрын
idea
@THEORIGINALMAXPOWER
9 жыл бұрын
GR8 vid. I have the same watch in my G-Shock collection.& had fun trying this out. It also works on my G-shock analogue/digital watch's too
@BadPete81
8 жыл бұрын
Cool info. Works also with module 3261.
@jonathanmeehan4400
3 жыл бұрын
My tilt switch is working but when I move wrist the light doesn't come on. It does come on if I touch the button, any ideas?
@brunosco
3 жыл бұрын
Did you enable auto light? The screen should display a tiny “A. EL” (for auto electroluminescence, I guess) right on top of the seconds when enabled. And you do that by pressing on the light button for 2-3 seconds. Tell me if that solved your problem! Oh, and beware of the drastic added battery drain when on auto light. I have to disable it during the low season if I want my “tough solar” to stay tough!
@ishan9939
4 ай бұрын
@@brunoscoIf I turn on the auto light, in how many days will this function take my watch's battery from high to low?
@brunosco
4 ай бұрын
@@ishan9939 That’s impossible to say. It depends on your usage, the number of times light is triggered and how much light your watch is exposed to. But I remember that for me, in winter time, it took about a month to deplete the battery from a medium charge - something like that. (No problem during summer)
@muttley1956
9 жыл бұрын
The module number for that watch is 3159 i.e. not 3150. Sorry don't know to what those numbers refer.
@ChiII_BiII
5 жыл бұрын
These do not work for the DW-5600E module 3229 as it does not have a tilt feature, or solar charging. If anyone knows how to do an LCD test on this model I would like to know.
@yve7670
2 жыл бұрын
It does work. Try the 2 top buttons and the bottom left one instead.
@the333ryan
Жыл бұрын
I have a different model and all three of those features are present for mine too
@brunosco
3 жыл бұрын
On the display test, under RCVD and PS, there’s an additional “CHG”. What’s that??
@kevin_couto11
3 жыл бұрын
It means charge your watch when the battery is low if it's Tough Solar.
@brunosco
3 жыл бұрын
@@kevin_couto11 Thanks for the info! 🙂
@barzanmahmood429
5 ай бұрын
My own shows the same CHG in addition to that it was on H level battery
@smk242
7 жыл бұрын
Works with my PRW-1300YTJ; thanks for this video.
@RiPaDo77
9 жыл бұрын
On my gwx5600 if you press mode,light(+), receiving(-), it displays a number and a letter but I have no clue what it means.anything on that?
@amoledzeppelin
7 жыл бұрын
It's the radio reception test. Button + scrolls through bands, button - runs the reception. Can respond with LNG or LOK, where L is the letter. And when it's LOK it actually sets the time according to the station signal! Unlike usual sync, tries the reception as long as there is even L1 signal level. Also has some strange bands unknown to me. J 40 - Japan, J 60 - Japan, U 60 - USA, G 77 - Germany, L 60 - UK, and then something strange: B 01, D 02, G 03 and T 04. One of these is Chinese, and which are the others?
@dominic_benoit
4 жыл бұрын
No , nothing means no signal l1 means low signal l2 means medium signal l3 means a strong signal
@strahinja3950
4 жыл бұрын
In my case tilt dont works but i have auto light and it works
@gx913rsv1
5 жыл бұрын
Wondering if you would be able to shed any light on following: Do you see the "greyish" solar border lines that go all the way around the edge of the watch, which act as the border enclosing all the solar panels compartments, these borderlines all look to be the same greyish colour all the way around. A friend has a brand new GX-BB56-1DR, except in his watch, some parts of the solar border lines are greyish and some parts of them are copper coloured? What is your opinion of that? It does not seem to be normal from seeing all the other GX-56BB-1's on yt etc?
@ChromeFreeDisco
5 жыл бұрын
Not sure quite what to make of it without seeing pictures.
@gx913rsv1
5 жыл бұрын
@@ChromeFreeDisco Finally found this, and is possible solution, btw I see the watch in your video above also displays some copper-colouring in the solar-panel borderline on the RHS, thank you for the response in any case: forums.watchuseek.com/f17/gw-5000-1jf-solar-panel-color-variation-updated-pics-323060.html
@aldreich31
11 ай бұрын
How to fix if the tilt function does not work anymore?
@jOk_Err
19 күн бұрын
Hold light button 3 sec to on and off
@firtle83
4 жыл бұрын
Anyone got any idea how to turn on auto sync? Mine won't sync at night but manually syncs just fine
@tomitsuki-t
4 жыл бұрын
In time mode, press the [set(+)] button, and long press [adjust] button. When success, display shows "R/C". press [set(+)] to change the setting, press [adjust] again to exit. Hope you helped.
@firtle83
4 жыл бұрын
@@tomitsuki-t thank you! Works perfectly
@TSilva01
9 жыл бұрын
Great, it work also on GW-M850
@bigbadbalesy
4 жыл бұрын
Works on gw7900 too.
@boardwalkrules
2 жыл бұрын
Does anyone know why in 24 hour format the hours between midnight & 11 aren't prefaced with a 0? For example, 07:00, 08:00 etc
@vaclav_fejt
Жыл бұрын
Better legibility.
@KISH351
4 жыл бұрын
Someone told me that means it's a real G-Shock?
@sylvainster30
2 жыл бұрын
Not anymore! Fake watch now does auto light and test screens 🤬
@FluxId-iv4zb
Жыл бұрын
@@sylvainster30how about the module number? do fakes shows that too?
@tomatomarc
6 жыл бұрын
is this really a 5610? it's looks so different...
@eeyyaakk6801
6 жыл бұрын
tomatomarc it's a negative display version
@equaliser2265
5 жыл бұрын
11,03 November movement fabrication date.
@brunosco
3 жыл бұрын
I also have 0311 below the [3150]
@destrosdiablo
6 жыл бұрын
works on my gshock FUTURA...only GSHOCKers know what is GSHOCK
@barzanbaranmahmood8869
5 жыл бұрын
I did it thanks
@TheAlucard900
6 жыл бұрын
You do sounds like Jarvis. Its compliment btw. Haha
@adamtayli4540
7 жыл бұрын
i tested it s true tk you haha
@simba2ndpatches14
5 жыл бұрын
so it looks like the secret functions are useless, have no need for them.
@MrPleers
5 жыл бұрын
Terrible display. You will be pushing the light buttons a lot with this one.
@ChromeFreeDisco
5 жыл бұрын
You're absolutely right, but I do love the look of it!
@thedancingalien7766
7 жыл бұрын
Tst' only the fairys
@fredcatcreedy980
4 жыл бұрын
Wow! How absolutely boring!
@USNCspartan
3 жыл бұрын
So Boring you had to comment on it 😂🤦🏼♂️
@fredcatcreedy980
3 жыл бұрын
@@USNCspartan indeed, stating the obvious doesn't make you appear intelligent dummy!
@USNCspartan
3 жыл бұрын
@@fredcatcreedy980 this has nothing to do with intelligence, merely the fact that because a video that you watched is boring you had to share that with everyone on here. Why ridicule when it’s helped so many people 🤷🏼♂️. Maybe not you though, this guy had the balls to make this video. Perhaps some constructive criticism wouldn’t have gone a miss rather than mocking ?
@fredcatcreedy980
3 жыл бұрын
@@USNCspartan Now your being really boring! Ok here is some constructive criticism the presenter needs to be less lacklustre In he presentation and throw some action into the videos.
Пікірлер: 68