ConceptZ has extra thick gaskets make sure you also get pressure washers
@harryslye1268
3 жыл бұрын
They do hang lower as I had them on my g37 coupe and the leak..always got check engine lights. I switched to my high flow cats and have had no issues since.
@nonameisthename138
3 жыл бұрын
Thats odd, I've been running full Motordyne art pipes and exhaust for four years with no issues.. knock on wood 🙏🙏
@nikolang8791
3 жыл бұрын
If I were you guys to save you from doing this is after tightening use some sort of lock seal if you plan on keeping the test pipes on there
@brianritzpatrick4737
4 жыл бұрын
Does the vibrant ultra quiet give it a deeper tone? Going to get some with my art pipes was just wondering if they those ultra quiets do make a difference or not
@INFINITIBROTHERS
4 жыл бұрын
Yes they make a big difference! 😎
@ThrowyaXup
Жыл бұрын
Did it make a rattling noise before? That's what mine have been doing for the past few years, never tightened them
@INFINITIBROTHERS
Жыл бұрын
Yes that's what happened to me too
@antoninogaudino
3 жыл бұрын
do motordyne test pipes throw a check engine light? i wanna put these on my car
@INFINITIBROTHERS
3 жыл бұрын
No they do not
@antoninogaudino
3 жыл бұрын
@@INFINITIBROTHERS perfect thanks a lot 👌🏻
@antoninogaudino
3 жыл бұрын
@@INFINITIBROTHERS quick question actually i’m new to car stuff so i was wondering will these motordyne art pipes pass through smog or a inspection
@INFINITIBROTHERS
3 жыл бұрын
@@antoninogaudino it depends what state you live in. If your state uses the sniffer on the tailpipe no.
@antoninogaudino
3 жыл бұрын
@@INFINITIBROTHERS i don’t think nevada does that so i should be fine then thanks a lot!
@faduhfade77
4 жыл бұрын
What kind of headers can u upgrade to when running those MD ART pipes
@INFINITIBROTHERS
4 жыл бұрын
Art pipes are designed for stock headers. They fit perfectly with the stock flanges so you would have to find a header that has a good stock flange or you will have to modify them
@faduhfade77
4 жыл бұрын
Infiniti Brothers Great video btw. Do u recommend not adding a header. I was about to buy the Z1 header but just found out it won’t fit the ART pipe.
@kassonbrown7211
3 жыл бұрын
@@faduhfade77 Any updates? I’m trying to add headers with MD Art Pipes as well.
@faduhfade77
3 жыл бұрын
@@kassonbrown7211 So for what I wanna run . Z1 headers: DE ART Pipes: CBE
@kassonbrown7211
3 жыл бұрын
@@faduhfade77 are you running this setup currently?
@Just_Some_Guy001
3 жыл бұрын
I know you said we can still use the bolts that the test pipes come with but to use the lock washer with them....but did you replace all the bolts? Or did you keep them and just add the lock washer?
@INFINITIBROTHERS
3 жыл бұрын
You can keep them But make sure you use lock washers Very important
@nicholasfortunato5691
3 жыл бұрын
threadlocker red
@srodri14
4 жыл бұрын
Great detailed video!! Would u sell these? U should give ur insta
@INFINITIBROTHERS
4 жыл бұрын
@Alvinski86 👐🤙🙏
@1BlackHurse
3 жыл бұрын
How did you know when it was leaking ?
@INFINITIBROTHERS
3 жыл бұрын
I can feel and hear it. Wasn't much but it was still leaking
@1BlackHurse
3 жыл бұрын
@@INFINITIBROTHERS at what rpm is’t noticeable ? I have it on my 370 and yesterday it started sounding a little bit different at around 3 to 4 rpm when bushing it a little
@INFINITIBROTHERS
3 жыл бұрын
The same thing happened to me. That's because they got loose. So I went back under there and tighten them with lock washers
@1BlackHurse
3 жыл бұрын
@@INFINITIBROTHERS I will check on it, it feels like the interior trim is shaking it self to death with this leak , Much appreciated you responding this fast man thanks.
@INFINITIBROTHERS
3 жыл бұрын
NP! GOODLUCK!🤙
@CleanCarbonZ
8 ай бұрын
Motordyne has their stuff built in China ..Its a well know fact.
@guitarpro594
3 жыл бұрын
If they leaked you did something wrong.. I had no exhaust leaks
@INFINITIBROTHERS
3 жыл бұрын
The problem was that the bolt were coming loose. The washesrs is what fixed the problem🤙
@reynaldorivera743
6 ай бұрын
You need extra thick gaskets from concept Z a you definitely need lock washers you will never have that issue again I have a full Motordyne on my 359Z Hr and now next Monday I will do my 370Z Lock washers oh yeah loctite
@jketphanh22
3 ай бұрын
@@reynaldorivera743what do I look up to replace gaskets on my motordyne art pipes ?? I’m having this sputtering sounds like a misfire my exhaust is rattling my y pipe could be leaking or my art pipes I’m really not sure .
@INFINITIBROTHERS
3 ай бұрын
Use stock o m gaskets. Art pipes are meant to replace oem cats. I would double check hardware to make sure everything is tight
Пікірлер: 47