Thank you for the guide, just upgraded to a 6900xt and did this for my old 1070 to give to a friend.
@EleanorNL
3 жыл бұрын
Thanks dude, I have the exact same card and it's always great to know if you didn't miss a screw when trying to pry the pieces apart ;). Cleaned it up and replaced the thermal grease, and I gained about a 3-4 degrees temperature drop, while the fans are running 3-4% slower. Fine with me, thanks for the guide :)
@zteyn123
5 жыл бұрын
You did a good job with the video, thumbs up!
@CmdrSoyo
5 жыл бұрын
good to hear that people like the content
@Poison2859
2 жыл бұрын
Why exactly did you take the backplate off ?
@tumsd923
3 жыл бұрын
I'm sorry, what is the thickness of thermal pad ?
@half101080
2 жыл бұрын
The pads on the ram are 1.5 mm thickness and the pad on the vrm is 1 mm thickness! The big pad on the backplate is over 2 mm, most probably 2.5 or 3!
@knightnxk2906
3 жыл бұрын
can the heatsink reach the other heatsink screwed on pbc the one on the rght side?
@johnezekielluna8040
3 жыл бұрын
Is the size of the thermal pads on the back of the mosfets 2 or 2.5mm?
@half101080
2 жыл бұрын
I compared without disassembling the card with a 2 mm pad i had and it's definitely thicker! 2.5 or even 3 mm! I'm not sure though!
@jsizjiisk7606
2 жыл бұрын
Will replacing thermal paste void warranty?
@donettawolf3679
Жыл бұрын
What are the dimensions of the thermal pads for this graphics card?
@alphabetical90
3 жыл бұрын
Hi! Thanks for this video, I'll do this this weekend. Also I'm trying to get some info about the thickness of the thermal pads of this model. Do you know how thick they are?
@johnezekielluna8040
3 жыл бұрын
I know the size for the vrms and its 1.5mm replaced mine with thermal grizzly's
@half101080
2 жыл бұрын
The pads on the ram are 1.5 mm thickness and the pad on the vrm is 1 mm thickness! The big pad on the backplate is over 2 mm, most probably 2.5 or 3!
@user-nc1pz8fs5d
17 күн бұрын
@@half101080 Is 2mm suitable for a backplate?
@lampexxl8599
Жыл бұрын
Would you recommend replacing the thermal pads in general, after 5 years?
@CmdrSoyo
Жыл бұрын
No, people just tend to break their cards with mismatched pads most of the time
@lampexxl8599
Жыл бұрын
@@CmdrSoyo Okay, good to know. Thank You 🙏
@lugga413
3 жыл бұрын
am i going to lose my warranty if i take off the cooler and replace the thermalpaste?
@Erowens98
2 жыл бұрын
Generally, yes. Though this doesn't actually have warranty void if removed stickers. You you might get away with it. As long as you don't leave any physical damage to find and use a similar paste to stock
@201aleks21
4 жыл бұрын
Good video,i need help how can i clean properly rx 570 4gb asus expedition.
@CmdrSoyo
4 жыл бұрын
you could follow the steps in the video (i made a video for that specific card too: kzitem.info/news/bejne/y3-Y2qBqsV-eZm0 ) and use toiler paper and some isopropyl alcohol to clean very dirty parts. the isopropyl alcohol does vaporize after a few seconds so there's no risk of doing water damage. if there is dust in the finstack you could use a vacuum cleaner or just blow air by yourself onto it, the dust should fall out. if there is dust on the thermal pads be careful since they can be damaged pretty easily, if that's too risky for you you can just leave them that's not a huge deal.
@TheKillerZmile
3 жыл бұрын
fuck this shit i unscrew all the screw and i cant still get it open
Пікірлер: 24