Thank you. I was able to replace the cracked screen on my tablet after watching your video.
@jammsgerminal176
4 жыл бұрын
Ian Smith you’re very welcome. I am glad the video helped you
@davidsokolower806
3 жыл бұрын
Worked great. Thanks for the video. Only issue was that I didn't remove the SD drive and carrier before I took off the case. Slightly pushed out the circuit board when the back of the case was removed, but all worked when I reassembled it.
@jammsgerminal176
3 жыл бұрын
That's awesome. I'll remember to say that next time.
@__miramarmahadev__189
3 жыл бұрын
I am watching this video in my broken Samsung Galaxy Tab a 😂😂😂
@jammsgerminal176
3 жыл бұрын
Now you can fix it yourself 🤣😅
@__miramarmahadev__189
3 жыл бұрын
@@jammsgerminal176 but i need money 😅
@jammsgerminal176
3 жыл бұрын
If the lcd is good. You can just replace the digitizer alone. It shouldn’t be much
@__miramarmahadev__189
3 жыл бұрын
@@jammsgerminal176 yesterday my friend's tab broke after falling down eventhough there is screen gaurd but his screen but didn't damage screen gaurd 😂😂
@jammsgerminal176
3 жыл бұрын
Now that’s funny 😄
@ernsocalixte8890
5 жыл бұрын
Great job! Success doesn't come you go to it!
@jammsgerminal176
5 жыл бұрын
Thanks my brother
@maestrohenry6670
5 жыл бұрын
Very good
@steelergurlakamary6184
5 жыл бұрын
You do amazing work great job
@jammsgerminal176
5 жыл бұрын
Thank you
@unimike4637
4 жыл бұрын
Thanks! I fucked up though. I didn't realize when pulling the LCD out that the whole bed it lays in also comes out and that it all should come out as a whole, not the LCD first. I bent the LCD just enough to ruin it while pulling it out so replacer beware - this can happen to you, too. I'm looking to find one online so I can replace it. Still a good video. Thanks!
@jammsgerminal176
3 жыл бұрын
Sorry about that. I didn’t think it was important to mention since I wasn’t working on the lcd. Next time I’ll try to give as much information as possible
@unimike4637
3 жыл бұрын
@@jammsgerminal176 appreciated -Thank you, regardless! Any idea where I can get LCDs?
@jammsgerminal176
3 жыл бұрын
Inbox me on Facebook. jamesthe king
@enriqueelizondo4872
2 жыл бұрын
Me too I try to be a hero and save my neices tablet looks like I just bought her a new one...smh lol still going to subscribe tho You should put UniMike comment on top so it give people a heads up on what to look out for
@davidolson694
3 жыл бұрын
On my unit the digizer flex cable was glued/taped on. How is flex cable reattached? How do you get the correct alignment?
@jammsgerminal176
3 жыл бұрын
I’ve never done that before once the cable is broken I get a new one
@Martine-rk9eh
5 жыл бұрын
Well done👏👏👏
@jammsgerminal176
5 жыл бұрын
Thank you
@aliciacuoco8273
Ай бұрын
Excellent video. I Have the parts,and tools,only item I am lacking,is the heat gun. I am a little wary of using the heat gun. Is there another way to heat the adhesive safely?
@jammsgerminal176
Ай бұрын
@@aliciacuoco8273 I found the heat fun to be easier than the heating plate. If you slip the tools between the glass and the lcd. When moving around just go up instead of down you should be fine
@jammsgerminal176
Ай бұрын
@@aliciacuoco8273 the heat gun is easier to find also and cheaper
@aliciacuoco8273
Ай бұрын
@@jammsgerminal176 ,ok I will give it a go. Thanks for the informative video.
@jammsgerminal176
Ай бұрын
@@aliciacuoco8273 my pleasure
@philippegauvin-vallee9371
2 жыл бұрын
The tape used in the video seems to be two-sided. Is there a brand or strength I should look for to fix my tablet screen?
@jammsgerminal176
2 жыл бұрын
Thanks for your question 👍. You can also use the B-7000 adhesive I found that glue to be very strong, efficient and easy to used. The 300LSE adhesive is very strong also 💪 you can use either.
@starburst98
4 жыл бұрын
My glass is fine but an insect of some kind crawled between the glass and lcd and died so now there is a bug on my screen that I cannot get rid of. Can i lift the glass, remove the bug, and put the glass bag down or is the glass ruined once lifted even if it was okay before?
@jammsgerminal176
4 жыл бұрын
Yes but you have to be very careful and you have to use a little more heat to make sure the glass don't crack. You still have to pull the screen upward to not touch the LCD.
@paulaaustin7778
2 жыл бұрын
Great video, I followed it and the screen works but not the touchscreen? Everything looks connected, any ideas?
@jammsgerminal176
2 жыл бұрын
Try to use some alcohol to clean the connector and try it again
@paulaaustin7778
2 жыл бұрын
tried it but no difference.. the new screen is connected and I can see it when its turned on but nothing else is working, not even the two buttons at the bottom.. does this mean I installed it wrong or possibly a broken new screen?
@jammsgerminal176
2 жыл бұрын
@@paulaaustin7778 if you followed the video the connections should fine. It might be a bad screen
@nirmalmishra57
3 жыл бұрын
How much
@jammsgerminal176
3 жыл бұрын
For something like this it can't be more than $50 to $60
@Abdul-rx2st
4 жыл бұрын
From where you buy this gray glass
@jammsgerminal176
4 жыл бұрын
I have a supplier
@jkent0415
3 жыл бұрын
I need to replace my charging port on my SM-T380. Can I remove the case without removing the screen?
@jammsgerminal176
3 жыл бұрын
To my knowledge not really because you have to get in between the gaps to remove the back cover
@kaitlynromano9868
4 жыл бұрын
What do you use to heat up the glass??
@jammsgerminal176
4 жыл бұрын
The heat gun
@jammsgerminal176
4 жыл бұрын
Heat it up for like a minute before trying to separate it
@kaitlynromano9868
4 жыл бұрын
Jamms Germinal ok thank yoi
@jammsgerminal176
4 жыл бұрын
@@kaitlynromano9868 my please don't forget don't heat up the glass in one spot you have to move the heat all around the screen
@kaitlynromano9868
4 жыл бұрын
Jamms Germinal ok thank you for the tips!!
@aliciacuoco8273
Ай бұрын
Question on Adhesive: is the adhesive already on the new screen or do I need to affix it myself?
@jammsgerminal176
Ай бұрын
@@aliciacuoco8273 some screens do come with the black adhesive. You have to check to see if yours has it. If not you have to apply your own. Now there is a liquid adhesive that works great. I’ll look for the name for you.
@aliciacuoco8273
Ай бұрын
@@jammsgerminal176 ,ok thank you. I got the screen kit for my T380/model of the Samsung Galaxy tablet
@jammsgerminal176
Ай бұрын
B-700 you can use that one instead
@jraida172
4 ай бұрын
Hi Jamms, when I attempted to plug the cable from the new glass to the circuit board, the piece of tape with the black strip of plastic came off. In trying to realign it at the moment. The flex cable isnt broken. Any tips?
@jammsgerminal176
4 ай бұрын
Hello 👋, send me a picture on facebook. Jamesthe king. That’s my facebook name
@jraida172
4 ай бұрын
@@jammsgerminal176 I actually don't have a Facebook account. What's your email?
@jraida172
4 ай бұрын
@@jammsgerminal176 Hi there, I don't have a Facebook account. What's your email address?
Пікірлер: 59