Well, this is an interesting model. Combining old and new features, materials, lock and build type for more cost effectiveness at a higher build level. Looks good to me Paddy.
@paddyspotatopeelers2154
5 жыл бұрын
Thanks pal this is simply good at any price. Atb paddy 👍😀☘️
@itshayappenshay6057
5 жыл бұрын
Thanks - very nice knife. I hope they make some smaller ones as well. I really like the size of the 753M. Have a good one!
@itshayappenshay6057
5 жыл бұрын
@Wheaten Zoomies Thanks - Just got it the other day and you're right, it's really good. I'm looking forward to more small axis lock models now. Take it easy.
@cocabandi
4 жыл бұрын
Picked one up on your recommendation, Paddy, and I'm loving this folder. Can't believe just how smoothly it opens and closes. Looks great, too. I did make a small modification: the blade was a bit pointy for my taste, so I rounded it off a notch. Perfection!
@paddyspotatopeelers2154
4 жыл бұрын
Thanks Sergio I really appreciate you letting me know. And like you I love adapting a knife to my taste. Atb paddy 👍☘️😀
@WilliamMancel
5 жыл бұрын
Great Ganzo 😄🗡 another one I have to have. I love 440c. Looks like a perfect knife, and I really enjoy sharpening my knives. Not after 2 or 3 cuts of cardboard, but 440c will hold an edge longer than that. Every time they increase the steel, the price goes up. Not by much, but D2 will cost you slightly more.
@WilliamMancel
5 жыл бұрын
I just ordered a green handle one from Power Cutlery. You convinced me I needed it Paddy, although it didn't take much convincing. I love getting a new knife in, and I know I'm going to put a Ganzo to use.
@bele28
5 жыл бұрын
Can't wait for fanzo to find a way to give us high end steel! Something affordable with top tier edge retention would be an absolute hit.
@BennyBladez-
5 жыл бұрын
I actually like the filler tab when most people don't.
@paddyspotatopeelers2154
5 жыл бұрын
I'm with you it looks finished. Atb paddy 👍😀☘️
@slidetek
5 жыл бұрын
At least they put a tab on, even higher end manufacturers just leave a hole.
@Jimatuscc
4 жыл бұрын
without it, knives look unfinished. I'd like to see it in matching G-10 though as opposed to Silver.
@Lemonhoko
5 жыл бұрын
My Ganzo collection increases everytime I come to your channel...thanks for another good review!
@joerico9461
5 жыл бұрын
Thanks for the review Ganzo does it again nothing wrong with 440c it's a must have and I'm more of a gun person but man-oh-man Ganzo keeps on putting them out
@angelguidesabbath
5 жыл бұрын
Ganzo is doing beautifully, loving those thick liners.
@slidetek
5 жыл бұрын
Glad it came so quick! Quite a difference over the years, this looks like a real winner.
@addicted2knives171
5 жыл бұрын
So many good knives from Ganzo and another great video from you.
@efrainperez8273
5 жыл бұрын
I received mine yesterday and love it!
@RandysWSG
Жыл бұрын
Going to have to give this one a try. Great video!
@bdh3949
5 жыл бұрын
I ordered one of these due to it's size but it is also a beauty, feels great, and works like a charm...nice choice here Paddy.
@luosnogard333
5 жыл бұрын
I love my Ganzos. Looks like I'll be getting another one. Thanks for the review
@OLMmedic
5 жыл бұрын
Wow. Thats a beauty
@jasonclark8921
5 жыл бұрын
Absolutely best knife you can buy for the money. Great video thanks for the upload and keep the great videos coming.
@arcie1776
5 жыл бұрын
Hi Paddy, great review! I just got this same model in black, was impressed with it out of the box, but I like to do tune ups. After disassembly and cleaning I re oiled the bearings, and softened the lock springs by increasing the bend a touch. They had unequal bend side to side, and after matching them up I can work the blade with both hands easily now. The detent is controlled by the springs tension, so it took two tries to get it perfect, but perfect it is, this knife is unreal smooth now, mechanics are tip top, and came shaving sharp out of the box. Ganzo continues to be a real challenger in the knife world, and I can’t wait to see more of your reviews. I got my FH51 after watching your video, and it was spot on, what a great little knife. Thanks for the good content!
@bigriceburner
4 жыл бұрын
I just ordered an fh51 because of daddy's video too and wanted to ask how well its held up 8 months later?
@TheKnifeBeater
5 жыл бұрын
Thanks for showing this one pad.
@bothompson4911
4 жыл бұрын
Hey Pattie, thanks to you I now own about 6 Ganzos an truly enjoy them all, they carry well, with minimal maintenance stay sick sharp, an look great, I have a Civivi asticus, in g10 natural coming Monday an thats my first venture into it, can't wait! Man knives get into your blood don't they brother! Stay safe my friend an all you guys an gals out in the four corners of the knife world!
@KarlRadekBonk
5 жыл бұрын
This is a beaut! I love that they do simple straightforward knives with super high value...
@paddyspotatopeelers2154
5 жыл бұрын
I hear you mate. Atb paddy 👍😀☘️
@zachstuff
5 жыл бұрын
Ganzo is definitely watching your videos! Nice upgrades to this knife!
@Visitor555
4 жыл бұрын
Very good interview man, funny and honest, and i love Ganzo too. Cheers!
@radioman8427
5 жыл бұрын
Hey Paddy , Enjoyed the video. Your doggie too !
@cptbrun0675
5 жыл бұрын
Nice! I like that pocket clip, lower and it looks stronger to :) Will definitely be ordering one.
@carmelotansengco4605
Жыл бұрын
I bought one just like yours to go along with my BK model. I totally agree with you with regards to the G-Lock. The omega springs of my SOG TAC-XR snapped. I've never experienced anything like that with any of my G-Lock Ganzos and I've got quite a few.
@patrickvanovermeeren4513
5 жыл бұрын
Thanks for the review sir! I agree,interesting knife.
@BigRedEDC
5 жыл бұрын
Looks like another great knife from Ganzo! Good to know that they listen to the community! Be well Paddy!
@rbs1889
5 жыл бұрын
Looks great! I'm gonna order one👍
@richklangen1833
5 жыл бұрын
Love Ganzo 😊😊
@stevew585
Ай бұрын
Fantastic review, subed. Thanks
@RoyFernbach
5 жыл бұрын
I cannot wait for mine to arrive. I got the black one but I might get some of those grey ones just to dye. Such a great blade. I really hope Ganzo stays with the axis/g-lock ... looks like they have it 100% dialed in now. This is an amazing blade at an amazing price.
@BennyBladez-
5 жыл бұрын
I really like this alot
@soroka_biloboka
5 жыл бұрын
Thank you, very nice review!
@centaurgaming2164
5 жыл бұрын
Ganzo really read your mind there paddy. The blade reminds me of a 940 really. Lovely looking blade
@papagatopetrycki8171
5 жыл бұрын
Thanks for the review....Ganzo just keeps pushing out hits!
@rickkerans8485
5 жыл бұрын
Great review. Love the mechanism and the color. Personally would have preferred the old style deep carry clip. Overall it is one I need to pick up.
@nebulamask81
5 жыл бұрын
Very nice to see them using 440c again.
@pop4803
5 жыл бұрын
I like how they listen to their customers, love the flippers but this g lock is getting better and better. They make them cheap enough where you can by them all . Haha. Thanks, Harry
@peerx7866
3 жыл бұрын
In my youth and 20's: Buck knives 30-40: SOG knives. Almost 50: switched to Ganzo.
@user-np9tg3jj1v
5 жыл бұрын
I really REALLY hope that Ganzo make this knife in 3" blade in some future . GReat Review!! That a good knife, G-lock is great and 440c a very decent steel 👌
@donwilson1296
5 жыл бұрын
Nice video! I agree s30v or s35vn for a little more money would be nice, really nice!
@fauxchung3189
5 жыл бұрын
Love that accent😆
@japes1016
5 жыл бұрын
Thanks Paddy for another great review. I’d like to give you credit for getting me into collecting Ganzo’s! Actually got my first one because of your review. Please don’t stop reviewing them and giving suggestions. They definitely listen. Best knives for the price. Will be putting this new one on the wishlist also. Salamat Paddy!. Cheers from the Philippines.
@paddyspotatopeelers2154
5 жыл бұрын
Thank you so much for your kind words. Atb paddy 👍😀☘️
@pioneer540
5 жыл бұрын
Your my dude Mr. Paddy. We are like minded on the Ganzos. I just can't find a better value...
@jerseyknifeguy6382
5 жыл бұрын
Ain't no different from a benchmade.......your payin almost 200 bucks for a 940....... And 20 bucks for a ganzo can you believe that!!!!!!!
@uroshs.4855
5 жыл бұрын
Benchmade is a bit better obviously, but these ganzo knives are an incredible value and quality for the money
@uroshs.4855
5 жыл бұрын
@Wheaten Zoomies Nah, about 8 times better 😂
@bothompson4911
4 жыл бұрын
I don't have a benchmade but a buddy said the same or Ganzo actually was smoother! I bought a Ganzo an love it!
@PotenzaVito
5 жыл бұрын
nice one Paddy
@PotenzaVito
5 жыл бұрын
hey Paddy when you doing review of this bring on the table this to compare GANZO Firebird FB7601
@Hooligan112
3 жыл бұрын
Wow
@NastyRenegade
5 жыл бұрын
So we weren't pulling your leg. There really was a new Ganzo 😉😄. You got it so fast, I'm still waiting for my FH 41 and 51. This one looks very nice 🍀😄
@paddyspotatopeelers2154
5 жыл бұрын
Lol. Paddys on the ball. Its great John. Atb paddy 👍😀☘️
@richklangen1833
5 жыл бұрын
2019 will be my classic knife year ... wait until December until I buy my next ganzo .... now it rough rider slip joint for all my money 😊😊😊😊
@rhino5419
5 жыл бұрын
HIHIHI. I knew you couldn't stop Ganzo. It is a beautiful knife. And you got this before Jay the knife beater. Lol. All the best.
@paddyspotatopeelers2154
5 жыл бұрын
Lol I'm so happy about beating Jay lol that guy is fast. Atb paddy 👍😀☘️
@Insanemembrane93
3 ай бұрын
Your name alone got me to subscribe 😂
@brycebedford1895
4 жыл бұрын
Great knife...… Hoping for 12c27 or 14c28 for their next steel with a axis lock. It would be way cheaper than S35vn or S30.
@magicdave93
5 жыл бұрын
What a sweet knife Stephen, I just don’t know how they do it for the price! atb David 👍🙂☘️
@carmelotansengco4605
Жыл бұрын
I just got delivery of mine (01/26/2023). The blade doesn't want to drop shut. I don't know if I should loosen the pivot screw, lubricate the bearings or just play with it for a while and see if it drops after a few hours of fidgeting.
@richklangen1833
5 жыл бұрын
Ok would be my slipjoint year but now i have ordered a 940 osborne hope it is as good as everyone says atb.Richard
@nitrorc4life1
5 жыл бұрын
I like em, have three
@timbo4374
5 жыл бұрын
Nice looking Ganzo. I'd like to see them use 9cr18 like they did in their Ganzo Firebird FH805 fixed blade. It's a nice looking knife, if you like fixed blades at all, you should check it out. 3.34" blade with a pocket clip on the kydex type sheath for just under 30 bucks.. Pretty cool little knife. I'm about tired of all the d2. It isn't performing all that well. 9cr18 holds an edge almost as well as vg10, so that would be great, even if we have to pay an extra 5 bucks for it. Great video as always. I may just take the plunge and pick one up!
@RoyFernbach
5 жыл бұрын
Personally I prefer 440C over any of the "cr" steels. Just a proven winner over time.
@timbo4374
5 жыл бұрын
@@RoyFernbach Yes it is..not half as bad as people make it out to be. Ganzo has always seemed to do a decent job with it too.I only mentioned the 9cr because it's what they used on that fixed blade, and it seems like they were trying to move away from the old standard, although this new one shows they haven't forsaken it all together. I'd prefer 14c28n over the 9cr, but that being said, my Civivi Backlash is 9cr, and it's held an edge pretty well..better than their newer D2 knives.
@andrewhaley8992
5 жыл бұрын
Paddy, I just purchased something I never thought I would be interested in. Imperial IMP22L. It was 8 bucks on Amazon, I cannot believe the quality for this money, it is the only slip joint I have, but am going to buy the smaller size. Well worth a look
@paddyspotatopeelers2154
5 жыл бұрын
Going to have a look. Atb paddy 👍😀☘️
@beaurex4756
6 ай бұрын
I wish you'd review some old Ganzos and compare them to newer knives.
@paddyspotatopeelers2154
6 ай бұрын
No problem consider it done 👍
@Iheartknives1
5 жыл бұрын
Ghanzo should sponsor you paddy! You do a lot for their company!
@paddyspotatopeelers2154
5 жыл бұрын
I'm with you. Lol. I still get the odd one from gearbest but I quite happily buy them. Atb paddy 👍😀☘️
@Iheartknives1
5 жыл бұрын
paddys potato peelers have you ever received the wrong items from them? I bought a techno 2 clone one time and they sent me a tiny slip joint instead. They credited the money back but said this was the only time they would do it. I sent them pictures for proof and everything. I guess it was just a mix up.
@jefffleser7632
5 жыл бұрын
Do you prefer this over the fh21 for every day carry?
@EliasPerez-cf5gp
5 жыл бұрын
Could you please make a video of how to sharpen a ganzo knife? :) and what tools to buy for that! Thank you!
@BennyBladez-
5 жыл бұрын
Looks similar to me to the zt n Osborne
@oldfool2635
5 жыл бұрын
I like the price but would like to see some weight reduction, Thanks mate, Furbs
@jeffsmith50001
5 жыл бұрын
Hi Paddy, Yep S30V, full flat grind, sub 3inch blade, axis lock and bearings. + comes with double sided strop and smurf poo!. And I bet they would have it in a nice dedicated box for about £35 mark. But knowing Ganzo they will want to blow minds and get sales with a sub 30 quid!. Having said all that, the PPP fellowship think and know 440c is the bees knees for a regular working knife. What about if Ganzo teamed up with Heinnie Haynes?. A marriage made in Heaven im thinking. ATB Paddy. A couple of spider crab for tea tonight mate, lovely!!
@paddyspotatopeelers2154
5 жыл бұрын
Sod the knives Jeff I'm coming for tea. Lol atb paddy 👍😀☘️
@bmoviebmovie
5 жыл бұрын
Also available now at Fastteck for $18.77 if you can wait for shipping. Better yet, they may be offering a Father's Day discount in the coming days if you can wait even more for the promotion. It's $24.95 at US Amazon.
@paddyspotatopeelers2154
5 жыл бұрын
Great info thanks pal appreciate it. Atb paddy 👍😀☘️
@chrisosh9574
5 жыл бұрын
That is pretty hard to beat for price, looks and quality and no-one can say 440C is a bad steel. If Ganzo are listening to you, keep saying 'slip joint, slip joint'. I got my Grohman Pictou today from AliExpress, I like it as much as the original Belt knife, half the size but very inoffensive looking and razor sharp. It's the first backlock I have bought in years, forgotten how good they are. Ganzo slip joint, Ganzo slip joint.
@paddyspotatopeelers2154
5 жыл бұрын
Lol. I am saying with my bedtime prayers. Atb paddy 👍😀☘️
@stoneblue1795
4 жыл бұрын
They need to recess their pocket clip screw heads under the clip so's they just chew up pants.
@goodbye_jaro
5 жыл бұрын
How are the axis lock spring tension? My issues with all the previous ganzo axis lock knives is the spring is just too hard. If this one is better, i will consider getting one.
@goodbye_jaro
5 жыл бұрын
@Wheaten Zoomies thanks! So, this one is no different than previous axis lock ganzos tension-wise?
@paddyspotatopeelers2154
5 жыл бұрын
Can't promise, but I like them, my ones great. Atb paddy 👍😀☘️
@TheScottyp1
5 жыл бұрын
why no d2 axis locks yet?
@paddyspotatopeelers2154
5 жыл бұрын
They will come I hope but don't worry the 440c is good stuff. Atb paddy 👍😀☘️
@dombond6515
5 жыл бұрын
Please use the axis lock with nested liners! I won't buy this because of the liners!!!!
@paddyspotatopeelers2154
5 жыл бұрын
Boy your very strict. Lol. 😜 Your missing a good knife. Atb paddy 👍😀☘️
@KnifeChatswithTobias
5 жыл бұрын
How tight is the lock? I've got one with the g-lock that I've been breaking in for over a month and it is still way too tight to operate smoothly?
@KnifeChatswithTobias
5 жыл бұрын
@Wheaten Zoomies, how easy is it put it back together?
@paddyspotatopeelers2154
5 жыл бұрын
This lock is perfect mate sorry yours isn't to good although they will wear in its frustrating. Atb paddy 👍😀☘️
@KnifeChatswithTobias
5 жыл бұрын
@@paddyspotatopeelers2154, it is on the one that looks likes Spyderco Paramilitary. I gave the little torque screw a quarter turn and the blade drops much better but it has a tad wiggle in it. Still the lock is pretty hard to pull back. It's getting better.
@KnifeChatswithTobias
5 жыл бұрын
Wheaten Zoomies, yep look for Tobias Gibson. If you see knives or fishing stuff it’s probably me.
@kristophermeek8689
5 жыл бұрын
I would rather have thumbstuds on my knives any day over a flipper. There is just something about a knife with great action and thumbstuds.
@NativeTexMexican
5 жыл бұрын
You'd probably like the FB763. (I have a CF version.) I dont like thumbstuds & I usually take them off. But, on the 763, they are perfect. It flys open and drops shut beautifully. Probably due to it being on bearings.
@wojtekimbier
5 жыл бұрын
Another "best ganzo ever" am I right? Haha
@sheltermonkey6065
5 жыл бұрын
Hi Paddy... I cover some of the negatives of this Ganzo in my review video. Also I have a video showing a big difference between the G-Lock and the real AXIS lock.
@aaronkahn-bork1120
5 жыл бұрын
According to Supersteel Steve, Ganzo’s 440c outperforms their D2 anyway! I’m with ya, been dying for Ganzo to bring their improved quality and design sense back to the axis lock. Gonna have to pick one of these up ASAP
@growl2088
5 жыл бұрын
Oh yes flippers are getting old thumbstuds are back baby :)
Пікірлер: 113