This really looks like a knife to get every review has been great. Thanks LTK.
@jonwilliams2826
7 жыл бұрын
Good knife for the price and sharp as hell and,I guess I've been lucky,mine have arrived on time and in great shape.
@OwlmanHooter
7 жыл бұрын
Mine came last week, I'm loving it for the price.
@StefanoVanzo
7 жыл бұрын
I just received mine. It's a 7533-cf and i totally agree with you! Nice knife! Good job man
@LuvThemKnives
7 жыл бұрын
Stefano Vanzo Thanks. I really like mine. I carry it all the time.
@Foxrock321
5 жыл бұрын
I found the same model with a black wash blade and black hardware ..sweet
@dubglock2312
7 жыл бұрын
the best of the ganzo goodness!!!!
@Jimatuscc
5 жыл бұрын
It's called a Logo, they are fairly common today. I've found Ganzo knives are super easy to adjust. I think the blue hardware runs in conjunction with ball bearings and D2 steel. Not sure with your knives though.
@72twist
7 жыл бұрын
The hardware is tempered steel. The blue color is an oxide layer. I used to work in a sintering foundry and ran several oxide tanks that would heat treat steel components and leave a blue/purple oxide on the parts. Anodizing is a coloring process used on aluminum and magnesium.
@honeybeesinjapan
6 жыл бұрын
Just ordered this knife. I really like your attention to detail. Thanks for sharing . Living vicariously for the next couple of days.
@GearReviewDepot
7 жыл бұрын
Gorgeous folder for sure!
@kylecerneka8964
3 жыл бұрын
It's like a protech blade on a Benchmade handle with a spyderco pockets clip for 20 bucks. Def. Will buy.
@slidetek
7 жыл бұрын
I picked up the regular G10 handle - wasn't sure I'd like the carbon as nice as it looks. The blade is flawless, and it sharpened very nicely. Love the satin finish. For $16 it's off the charts nuts quality. The last Ganzo I looked at a couple years ago was just "meh", they're doing something right.
@johndolby3472
7 жыл бұрын
I put a torx bit shaft thru the piston lock to hold it open for 2 days. Loosened it up to my liking.
@mistersmith3986
7 жыл бұрын
I have Ganzo G741 with Carbon Fiber scales and G727M with G10 scales. Love them both. G741 is my favorite!
@LuvThemKnives
7 жыл бұрын
+mister smith I love my Carbon fiber G741. But I'm now carrying my new G7531-CF. it's my new favorite Ganzo
@9999plato
4 жыл бұрын
It's a nicely designed cheap knife. The steel is OK I love the shape and the action is frigging awesome! I have a lot of knives, some quite expensive but this makes it into the rotation.
@jelteghtc
6 жыл бұрын
I'm really impressed with the looks, details materials, and fit and form, I'm probably gonna buy this one! I mean it really is all in the details, like that jimping, most manufacturers make it so it's only on the liner and not the scale so not really functional, I don't no what childlabor they are using over there but these children know what they're doing and I'm gonna make some use out of it!
@Jimatuscc
4 жыл бұрын
G-10 spacer and the Carbon Fiber is a laminate with two sheets of Carbon Fiber and G-10 sandwiched in between. (like plywood).
@BrianMcKinny
7 жыл бұрын
The scales are a carbon fiber veneer on top of G-10 scales, so yeah, the spacer is G-10 as well. Just an FYI... :) Keep the reviews coming, brother! Really enjoy your humor and style of review. Thanks!
@brianminkc
7 жыл бұрын
I miss the good ole days when they came out with this knife.
@LuvThemKnives
7 жыл бұрын
brianminkc Things are progressing so quickly. I know
@mikegalley9335
6 жыл бұрын
just got mine a few days ago, for £24 , this thing is the dog's bollocks......Alongside my KW contego, it's not a patch, but the contego cost six times as much-I'll definitely be ordering some more ganzo's.............
@68MIKEILIKE1
7 жыл бұрын
It's a great knife at any price.
@cocabandi3196
6 жыл бұрын
From my experience, and I've purchased 2, the Firebird brand folders have arrived with much smoother piston locks than previous Ganzos. That's been my experience, and I no longer spend time breaking one in.
@mooseclappin11
7 жыл бұрын
It is real carbon fiber, but not the entire scale. It's the same thing that Spyderco tends to do: take a G-10 scale, and laminate some extremely thin layers of CF on top of it.
@LuvThemKnives
7 жыл бұрын
mooseclappin11 I'm not sure that I agree. I had the szabo folder and I could tell that there was g10 included in that scale. This actually feels like pure carbon fiber
@mooseclappin11
7 жыл бұрын
Look at the sides of the scales. If you can't see the striations of the weave throughout the entire thickness of the scale, then it's just a laminate. For reference, the CF Böker Kwaiken and Urban Trapper have full CF scales.
@infest409
7 жыл бұрын
Yeah, it's a laminate, but it seems that they did a great job at it.
@jb678901
7 жыл бұрын
Correct...but Ganzo did a great job for less than 1/10th the price!
@ericblade8330
5 жыл бұрын
JB6789 thats the part we really like🔪🔪🇺🇸
@Foxrock321
5 жыл бұрын
So my latest project..I bought 2 G753 CF from DHGate..well, they sent me to F753, with Blackwash blade and black hardware...Damn. no Blue hw!!! Damn..so, I went to John at Power Cutlery and bought me 2 Orange and a green G10 G753..took those suckers, tore em apart, and created some CUSTOM Ganzos. the Carbon Fiber versions have the satin silver blade, blue hardware and orange backspace.. The Orange G10 are Halloween Blackwash blade and black hardware and pocket clip... Btw, breaking down this knife ain’t no walk in the park..and they do have one bronze and one white nylon..bushing the backspacer are free spinning so getting the screws out was a bitch..anyway I have pics if you want em
@justinharris6057
5 жыл бұрын
Just bought this knife, because of your video thanks man. I hope it's amazing
@joshwarren6987
7 жыл бұрын
certain ganzo knives remind me of spyderco. :)
@ericblade8330
5 жыл бұрын
Josh Warren oooh shush now, dnt let too many people hear yu lol. The spyie n benchie lovers be mad atchu! Lol. They R Very cool knives🔪🔪🇺🇸
@humzilla707
7 жыл бұрын
just got mine and its way better than any of the other ganzos except for maybe a 7393.
@Typhoon911
5 жыл бұрын
I believe the graphic is their firebird logo.
@infest409
7 жыл бұрын
Mine should be here in a few days, I'm very excited about it. Almost too nice for the price.
@LuvThemKnives
7 жыл бұрын
Ernie Pl Correct
@savagemilkman8383
7 жыл бұрын
I have owned 3 knives of this model. Blade play came on two of them...and blade play developed on the 3rd eventually that could not be corrected. I also owned 1 with the titanium colored coating on the blade. It came off very easy. I wanted this knife to be great, but its just not quite there imo.
@JHunt6352
5 жыл бұрын
Sugar Sheffield, I have CF and G10 of this knife with titanium coating on both. Mostly everyday use in the kitchen and no problems so far with the coating+blade play+edge retention. It holds up better than some expensive knives that I have and it takes no time to sharpen back to razor edge. I do mean no time at all. For the price and quality, this one is very hard to beat. Ruike p128-sf was my favorite until I found this one. Well, they both are my favorite now.
@hovan2yourjunk
7 жыл бұрын
Just got mine yesterday...luvin' it! Not crazy at all about that firebird logo tho
@LuvThemKnives
7 жыл бұрын
hovan-A-sec I don't care but it's a bit strange.
@waitingisfun
4 жыл бұрын
The blade is very thin in the tip. It got me worried.
@TheFiendRacer
5 жыл бұрын
The cf looks cheap but what can u expect for 20
@S.A.Masquerade
5 жыл бұрын
I just love your channel.
@Solo_adv
5 жыл бұрын
For the 10th. time YES we see the blue.
@4thRico
7 жыл бұрын
thanks for your care about european fans, measurments in grams and milimeters are very hlpful.
@brandontoler2382
7 жыл бұрын
the blue isn't 'll the way down on the thumbstud because they are anodized right
@Jimatuscc
5 жыл бұрын
The Ganzo logo dude, it's a "firebird"
@Nanchi
7 жыл бұрын
that is a cool ganzo but ganzo has another model with purple hardware pops a little more the thumbstud was funny blue on half
@brianminkc
7 жыл бұрын
The saying around these parts is " back like a bad rash".
@andymetcalfe7060
7 жыл бұрын
The first three numbers are the knife code and i think the last number is blade colour, 1 for satin, 2 i think is tumbled and 3 for black
@genoedcknifecollecter1538
4 жыл бұрын
I so badly want to exsperience a ganzo
@GunCollector007
7 жыл бұрын
Looks great. I'm waiting on the G7533 from gearbest.
@cheapmovies25
7 жыл бұрын
I should mirror polish it
@Polyfusia
7 жыл бұрын
Much prefer the titanium coated version. That's the one I ordered.
@snakemanstu
7 жыл бұрын
Nice review! Just waiting for mine to arrive from gearbest.Should be any day now.Always liked the ganzos for the price they cost.
@LuvThemKnives
7 жыл бұрын
+snakemanstu I'm liking mine. Great knives
@snakemanstu
7 жыл бұрын
LuvThemKnives yeah looks a great knife!
@kaewkusolsuponthorn8777
6 жыл бұрын
Good knife
@antonioreispa2619
7 жыл бұрын
muito bom os seus videos, parabéns.
@Omega17TheTrue
7 жыл бұрын
Its obviously just a fine layer of CF over G10, over-wise if would have been lighter! Why you didn't get the coated version?
@LuvThemKnives
7 жыл бұрын
Blao I'm not big on coated blades. They look like crap when they get scratched up. I really prefer stonewashed.
@Omega17TheTrue
7 жыл бұрын
I also love stonewash! I just dislike satin finish, maybe because its too common. I even prefer mirror finish. See the Ganzos with wood handle and stonewash finish. Perfection.
@arcforceworld
7 жыл бұрын
love the knife. but dam their shipping SUCKS! Next time I want one of those their gonna have get an american warehouse.
@ryanbrimer1039
5 жыл бұрын
How do I get it with the blue accents
@brianminkc
7 жыл бұрын
got mine today.... two of them... minor blems on both blades.
@LuvThemKnives
7 жыл бұрын
brianminkc I like mine
@brianminkc
7 жыл бұрын
I like mine too but one had a VERY small rust spot or stain and the other has a couple hairline scratches on the blade. Evidently QC just looks for glaring defects not very small blems
@PowerMadHeadBanger
7 жыл бұрын
Can you review the Ganzo G7522? It's as framelock with ball bearings and flipper. I am dying to see how well that Ganzo flips before I pull the trigger.
@LuvThemKnives
7 жыл бұрын
PowerMadHeadBanger I'll check it out.
@SeanLiu888
7 жыл бұрын
I just received one. It's not very good, miles behind this G7531. I posted an initial impression here www.reddit.com/r/Ganzo_Knives/comments/569z6h/ganzo_g752_not_recommended/
@LuvThemKnives
7 жыл бұрын
PowerMadHeadBanger It's on order. And will be a couple of weeks before It gets to me
@LuvThemKnives
7 жыл бұрын
PowerMadHeadBanger I'm uploading my review on the G7522 now.
@PowerMadHeadBanger
7 жыл бұрын
LuvThemKnives gonna check it out! I am loving the channel. I feel like I am sitting next to you having a conversation so spontaneous that you are. Thanks.
@Ryan-jx4vh
7 жыл бұрын
I just bought this knife. I also subscribed. Would you mind telling me if there is a yojimbo 2 clone out there? I am only buying Chinese clones anymore. I don't want to drop over a hundred dollars on a knife since seeing your channel.
@LuvThemKnives
7 жыл бұрын
ryan ford I found this link m.dhgate.com/product/yojimbo-2-knife-c85-gp2-carbon-fiber-handle/394030906.html#s1-1-1;searl|3400684865
@Ryan-jx4vh
7 жыл бұрын
LuvThemKnives It says not found, but I appreciate it. I will keep searching there. Thanks!!
@LuvThemKnives
7 жыл бұрын
ryan ford m.aliexpress.com/s/item/32813603264.html?spm=a2g0n.search-cache.0.0.6Ep0rg
@Ryan-jx4vh
7 жыл бұрын
LuvThemKnives Okay.. you are the man. $16 and I even like the carbon fiber handle better than the original. For that price I just ordered 2 of them. Thanks so much! Subscriber for life. 🙏
@LuvThemKnives
7 жыл бұрын
ryan ford You're welcome
@abc456f
6 жыл бұрын
I'll never buy another Ganzo with their axis lock. The studs are too flush with the handles and the ones I've bought were stiff as hell. I have a 7511 liner lock that's my daily beater and a 747 automatic.
@christechguy
6 жыл бұрын
srg914 birdshot IV does a video on how to take the stiffness out of them by adjusting the internal spring but for the price they give it to you at shit it isn't much to complain about
@brianminkc
7 жыл бұрын
Nice blade... I think they are painting the screws with the blue dye machinists use to make it easier to see where their cuts are. Its called "marking blue" or "Prussian blue layout dye". lol.... kind of funny how they put a trademark on a blade shape someone else designed. what ev's I guess they expect other people to respect their trademark? I could see that mistake putting Ganzo at risk in a World Court in the future. Could even cause the company to fold up if they get sued.
@bradb5094
7 жыл бұрын
brianminkc heat oxidized.
@AlphaT2Delta
5 жыл бұрын
.04 CF on G10
@codyholland8011
7 жыл бұрын
Are the thumb studs removable?
@LuvThemKnives
7 жыл бұрын
Cody Holland I'm not sure. I've never tried to remove them.
@codyholland8011
7 жыл бұрын
LuvThemKnives okay, just wondered. I just ordered two and those thumb studs will have to come ot to be sharpened on an edge pro. Thanks.
@hovan2yourjunk
7 жыл бұрын
You guys should check out atechreviews on Instagram! He posted a photo of some new Ganzos that are going to be released real soon...they're sick!
@LuvThemKnives
7 жыл бұрын
hovan-A-sec Thanks for the information. I just checked it out. Great!!
@91classicrock
7 жыл бұрын
where can i buy one ?!
@LuvThemKnives
7 жыл бұрын
91classicrock Here's the link m.gearbest.com/pocket-knives-and-folding-knives/pp_458179.html
Пікірлер: 102