Here is the link to the putty. amzn.to/3xmrTIL. Ultimately we found this product cracked overtime but it helped us fill the gaps from debris. We will be continued to search for another style of solution as unfortunately our planks have continued to gap. I have uploaded a new 4 year review video of our floors here. kzitem.info/news/bejne/saWLrKWlj4qkYHo. I will attempt a few more filler products and report back. If anyone else has had luck with any type of filler please share it here!
@cassandraday2614
3 жыл бұрын
Yes, use a suction cup and rubber mallet KZitem it
@cassandraday2614
3 жыл бұрын
It's the best way vs trying to use a patch that matches
@BuildLessons
Жыл бұрын
@@cassandraday2614 Unfortunately that repair method is for the click vinyl, and will not work for this application as we installed glue down vinyl. That being said I am open to any and all tricks for fixing this if you are aware of any.
@docjohnson3980
3 жыл бұрын
Look good dude just continue doing what your doing. No one would ever notice it unless you brought it to their attention.
@BuildLessons
Жыл бұрын
Thanks for the support. We have found that the putty continues to shrink and crack over time as well and we did not continue to fill the rest of the floor. We also found that our floor has continued to gap, I just uploaded a new video on it here! kzitem.info/news/bejne/saWLrKWlj4qkYHo
@RanbirSanghera
8 ай бұрын
A wife is the only one that would notice.
@astrammd
2 жыл бұрын
Honestly anything is better than the gap, which is going to collect all manner of crumbs, dirt and fur if you've got pets. Nice work.
@BuildLessons
Жыл бұрын
Yes the gaps collecting the debris is the worst part! We have found that the putty continues to shrink and crack over time as well and we did not continue to fill the rest of the floor. We also found that our floor has continued to gap, I just uploaded a new video on it here! kzitem.info/news/bejne/saWLrKWlj4qkYHo
@squeakymcmurdo
Жыл бұрын
Caulk or vinyl-compatible grout would work better without cracking or shrinking
@cd653
Жыл бұрын
I'm so going to do this. Looks much better than seeing a gap.
@BuildLessons
Жыл бұрын
I hope it worked out for you. Do you have glue down vinyl floors that have shrank and gapped as well or is yours a click system?
@shall5867
Жыл бұрын
Looked perfectly fine to me and I already planned to buy this to hide some very small hairline gaps in some vinyl peel and stick tile I am putting down. I have fairly solid light gray lines where the tiles butt together so should work. The video seeing how it is applied was good.
@BuildLessons
Жыл бұрын
Thanks for sharing, was yours a glue down application? Sorry for the slow response I have been on a hiatus but am planning on putting a lot of focus into the channel in 2023!
@shall5867
Жыл бұрын
@@BuildLessons Mine was vinyl peel & stick tile
@GG-pr3yo
Жыл бұрын
Use Dynaflex 230 caulk and tint with spray paint. Gives you a lot of color variation and can darken with addition of more paint. It works perfectly on my LVP floor. It dries exactly like regular caulk, but tinted to your floor color.
@unionse7en
2 жыл бұрын
The visual part is secondary to , filling the void,prevemting stuff from collecting or edges getting caught.
@BuildLessons
Жыл бұрын
Yes the gaps collecting the debris is the worst part! We have found that the putty continues to shrink and crack over time as well and we did not continue to fill the rest of the floor. We also found that our floor has continued to gap, I just uploaded a new video on it here! kzitem.info/news/bejne/saWLrKWlj4qkYHo
@kazejah1014
Жыл бұрын
Ya I'm about to do this for some dark brown flooring gaps, and I was thinking to mix as needed, and also to lay down tape on both sides of the gap first so I can apply it easier without getting it all over the planks. I think if applied well based on this video it will be fine....if colour is close enough to a match.
@familyman2480
3 жыл бұрын
What I’m going to do is use the wood putty first… Then after the wood putty dry, take a paper towel with a black ink pen or marker, and lightly draw lines across the putty,to make it blend in with the line thats in my vinyl plank flooring, just kind of blend it in. Then maybe take a paper towel and Try to blend it in even further (I can’t really verbally explain how I’m going to do this, I just had this idea in my head to try this out on one or two areas and see how it looks).
@BuildLessons
3 жыл бұрын
Have you had some vinyl that gapped badly? How old is it? Please report back with how your method has worked I would love to know!
@pamelacraig2791
3 жыл бұрын
Yep, I'm also interested!
@cassandraday2614
3 жыл бұрын
Use a suction cup and rubber mallet way easier KZitem it
@ImeldaFagin
3 жыл бұрын
I was thinking the same thing. I’d mix a watered down India ink or try to find a light grey marker and mix it with the light putty and also the other putty. Make two samples and hold them against the wood both in dim light and bright….and of course show it to you wife! I used to do this kind of repairs on wall paper gaps.
@BuildLessons
Жыл бұрын
@@cassandraday2614 This method works well for click style vinyl but ours is glued down. The glue down seems to have much worse issues with shrinkage over time potentially because of how thin it is.
@kirkhepburnmiddleagedwhiteguy
2 жыл бұрын
Since you cannot easily access the edges of the planks try using double sided tape, a wood block and hammer to tap the end joints together. A very thin bead of super glue, before tapping together, to hold it, works great on vinyls.
@swiftaudi
Жыл бұрын
Or some really good sneakers and some kicking. I had a plans at the front door that has a gap. I eventually just kicked it in with sneaker’s. I also glued the back so it would stay lol.
@BuildLessons
Жыл бұрын
Unfortunately I do not believe that will work in our situation since the planks are glued down not floating, and they have actually shrank in size. I believe we would have to lift up and relay a large portion of the floor, which leads me being a non believer in the glue down application anymore, click only.
@js7919
7 ай бұрын
Glue-down planks are notorious for expanding and contracting Temp in rooms needs to stay consistent year-round to not have an issue. Areas that get cold (around doorways to outside or drafty areas- compared to areas that get more heat, like direct sunlight) in colder areas you will get gaps. The glue used can help. Using a wet set (that dries hard) can lock in planks better than the pressure-sensitive glue normally used. But a wet set is much more difficult to work with as you can not work on top of flooring when installing and no foot traffic for 8-12 hrs or longer. Plus repairs for wet sets are more difficult.
@blarmer22
3 жыл бұрын
I agree - when the planks are the same colour it’s not bad but the variation is too much in this flooring to do every gap we have
@BuildLessons
3 жыл бұрын
I agree! Worth a shot for the price or the putty, and I think it depends how picky people are but generally speaking I would think this is a short term solution unless you have a floor that is very continuous in color throughout all the planks!
@jayschuring745
3 жыл бұрын
Can try mixing caulk to aquire custom color
@NoahHornberger
Жыл бұрын
after you work your (light colored) putty in the area you can gently go over with a rubber float (from tile grout work) to get a very even fill without pulling the putty back out! Get a quart of good paint to match the color of the dark part of the grain. For about 5 minutes of work (extending the grain lines) you can make it pretty much disappear if the two main colors are close enough.
@forrestjoyner7593
Жыл бұрын
I'm more interested in protecting the flooring from moisture. We have a couple scuffs where you can clearly see the particle-board type interior of the plank, which as we know is just a sponge looking to swell if you use any kind of moisture while cleaning it. For me, it's #1) seal the floor and #2) looks and #3) wear or longevity of the repair.
@BuildLessons
Жыл бұрын
Yes if you've got a wood fibre core moisture is certainly the main concern! Our floors are totally plastic through and through so there are no issues there for us.
@bellsquadvlogs9699
3 жыл бұрын
I just watched a video where a guy took a glass suction cup on the vinyl floor and then used a block and hammer to close the gap. I just bought one on Amazon for $15 bucks and I’m going to try it!
@Casterial
3 жыл бұрын
I did this for a bit, but eventually the gap became HUGE
@BuildLessons
Жыл бұрын
Are your floors click or glue down? We have not found a solution for gapping glue down floors yet.
@lolli2943
2 жыл бұрын
Wish I had this when I renovated my house 15 years ago…wish I had KZitem! I had 1,2,3 Home Depot 😫😫
@michaelrobinson4677
2 жыл бұрын
Looks great, trying to fill gaps on 12x12 vynl flooring. Thanks for video.
@lolli2943
2 жыл бұрын
But this is wood filler… did you use wood filler?
@shall5867
Жыл бұрын
@@lolli2943 Roberts is also for use on vinyl
@BuildLessons
Жыл бұрын
How did you make out? Have your tiles continue to shrink?
@mr.hustlaelsuperior8293
6 ай бұрын
They sell markers for that i got acouple of gaps chips and i bought markers and i looks good
@ooklathemok7507
2 жыл бұрын
After the filler, use a marker to color or "Picasso" the filler to blend the color.
@BuildLessons
Жыл бұрын
We found that the Roberts putty continued to shrink and crack as well and did not continue to fill the rest of the floor. Unfortunately our planks have continued to shrink and gap as well, so I am no longer a fan of the glue down products, click only.
@cassandraday2614
3 жыл бұрын
Use a suction cup , press a board up against it and hit it with a rubber mallet then you'll have no gaps
@lolli2943
2 жыл бұрын
Called seasons… humidity and freezing… still causes gaps
@BuildLessons
Жыл бұрын
Works well with a floating click floor but not with glue down unfortunately.
@MaelthasDivine
3 жыл бұрын
I have noticed that alot of glue down vinyl plank gap over time due to the heat change and high traffic areas with alot of movement in the floor beneath, it's so unfortunate, even the slightest gap is noticeable :(
@thombaz
2 жыл бұрын
I had such a hars time mesuring out my floor and it was a perfect fit. I did it for 3-4 days to be really good, and still it have a lot of small gaps. Such a bad product idea..
@lolli2943
2 жыл бұрын
Every season.
@BuildLessons
Жыл бұрын
Yes we have noticed this as well, I actually just did a more recent update video on how bad it is getting: kzitem.info/news/bejne/saWLrKWlj4qkYHo. Do you have a glue down floor that is gapping badly? Which brand / product? Regards, Mitch.
@BuildLessons
Жыл бұрын
@@thombaz Yes ours has continued to gap, was yours a peel and stick or glue down product? I'm getting the sense the almost everyone is having trouble with the glue down product as time goes on.
@BuildLessons
Жыл бұрын
@@lolli2943 Do you have floors that are gapping as well? Ours continue to get worse.
@consumersgasman8376
Жыл бұрын
no one would notice, its just you cause you are on top of it.
@caseypries7559
3 жыл бұрын
I don't think it looks that bad. Old hardwood floors would likely contain some filler anyway and you have a very rustic plank so it kind of fits the look.
@BuildLessons
Жыл бұрын
Yes I agree many hardwood floors do require similar repairs. The gapping has gotten worse since this video, I am no longer recommending glue down applications I have talked to far too many people who have had gapping issues since!
@dmp9021
3 жыл бұрын
I think it look fine..
@BuildLessons
Жыл бұрын
We thought so at first as well, but in the long run it didn't hold up! Are you having floor gapping issues as well?
@berokkentoi9
3 жыл бұрын
Can the putty hold when i mop the floor?
@BuildLessons
Жыл бұрын
Our does holds up find, but ultimately we are not happy with the putty as a solution. Do you have vinyl floors which have gapped? Ours continue to get worse over time, it seems that LOTS of people are having this issue!
@ColdSprite
Ай бұрын
@@BuildLessonsit’s cause of the way you installed it bro , did you put a moisture barrier underneath? Doesn’t matter if the planks come with it already it’s better to install a moisture barrier anyways it’s like 30$ for a 500sqft roll & did you leave gaps all around the edges of the wall? And did you take off the moulding prior to that? Plus like you said.. don’t glue this down. You gotta let it “loose” so it can expand and contract together.. mines going on 4 years and it’s still perfect .. the planks settle after a couple days and it won’t feel “loose” anymore
@lolli2943
2 жыл бұрын
It not about looking fine. It’s about the cracks filling up with crap. The only time you shouldn’t do this is when it is cold out, because wood expands and retracts… not sure about these floors. But do it in the summer, if there is still cracks where food and dust gets in.. do it. I used to use a butter knife. Fixes for everything weren’t at your finger tips, like they are today.
@BuildLessons
Жыл бұрын
This product doesn't seem to expand and contract quite the same as hardwood, mainly just continue to shrink. I believe the UV from sunlight is causing the issue as we have several areas that are always very warm (overtop of our furnace room) and it has to gapped as badly as the areas which receive a lot of sunlight.
@robinparmar7865
2 жыл бұрын
Thank you very much!
@BuildLessons
Жыл бұрын
Your welcome, thanks for the kind words! Sorry for the slow response, I had to take a break from KZitem but am going to be a lot of effort into it this year!
@moviejunkpodcast
3 жыл бұрын
Is it ok to use wood putty on wood vinyl plank?
@BuildLessons
Жыл бұрын
I believe so, as the Roberts putty I used here is advertised as a "wood, laminate, and vinyl product". I don't think anything you use will hurt it, but the only question is whether or not it will remain flexible enough to withstand cracking as the planks continue to shrink. Do you have glue down or click flooring vinyl? Regards, Mitch.
@moviejunkpodcast
Жыл бұрын
@@BuildLessons click floor vinyl no glue
@JesusFreak1029
5 ай бұрын
Need to fill in some longer thin gaps. Is this stuff waterproof?
@EternityJMan
2 жыл бұрын
As Doc says, no one sees it. That said, I’d go dark. Much more natural, that dirt and such, would/will fill up a gap. If it’s all about super perfection, take a piece of your leftover vinyl, mix the two in diff. ratios, and put down a few lines on it. After drying, you’ll know where you stand. + a loose piece, can be moved around. Thereby tested, at any light/angle.
@BuildLessons
Жыл бұрын
I just uploaded a new video on it here which shows how the gaps have continued to get worse and the putty eventually shrank and cracked. kzitem.info/news/bejne/saWLrKWlj4qkYHo Thanks for the comment and consider subscribing if you like home building and building science content! I've took a long time off of KZitem but am taking content creation seriously in the coming months and hope to create some top notch content around all things to do with the construction of your home!
@BrooksBray
Жыл бұрын
Where are you from? You sound like a Yooper (Upper Michigan) or Wisconsin resident.
@BuildLessons
Жыл бұрын
Peterborough, Ontario, Canada! When we travel to Florida people ask if I am from Minnesota!
@donaldking7432
Жыл бұрын
🤣🤣🤣🤣🤣🤣my boy gave a video of "Fail"😆😆😆it's cool though!!
@BuildLessons
Жыл бұрын
Lol yes it didn't work out to well but still thought it would be valuable to share the process!
@chemicallyfreenolye5462
2 жыл бұрын
what about a pull bar to close the gaps.
@BuildLessons
Жыл бұрын
These are very thin planks which are glued to the floor, so it will not work like it would for a floating click system.
@umnunawaf2008
3 жыл бұрын
Hi I put vinyl in my house as well but I’m finding that it is literally swollen and it is very noticeable when we are walking on it do you have any idea how I can fix this because I can’t find it online anywhere
@BuildLessons
Жыл бұрын
Interesting what manufacture did you use? Did you ever find a solution? Sorry for the slow reply I was overwhelmed in my business but have rearranged things and plan to focus a lot of energy on the channel this year!
@umnunawaf2008
Жыл бұрын
@@BuildLessons hi that is okay, I notice it happens on cold or hot days, I’ve done my research since then and apparently it’s common and I did find a solution, but to answer your question we bought this floor from Home Depot and I’m glad you will focus more on your channel
@cweb1210
2 жыл бұрын
Can you use this for glue down vinyl?
@BuildLessons
Жыл бұрын
Yes that is what we used it for. In the long run it continued to shrink and crack so we did not carry on. Do you have vinyl floors that are continuing to shrink and gap?
@cweb1210
Жыл бұрын
@@BuildLessons I do. It's a relatively new home (2018) so I'm not ready to replace the flooring and needed a temporary solution
@cweb1210
Жыл бұрын
I mixed two colors and you can't really tell.
@karendadd483
Жыл бұрын
As it shrinks and swells it will crack
@49ers501
9 ай бұрын
I was told by my floor guy sun is not good for LVP flooring
@benjaminperez6106
2 жыл бұрын
Where can I get the my ninyl floor is green dark where can I get it I like that thank you
@BuildLessons
Жыл бұрын
Unfortunately I am not aware of a product like this. Did you manage to find something?
@picklechips1483
Жыл бұрын
... .... He said his was bad gapping... My gaps are like literally twice that size. 👀
@jhunt32004
Жыл бұрын
it only looks odd to him because he didnt do his entire floor so the lack of uniformity is sticking out. Just finish your floor and nobody would notice unless you pointed it out
@LULC0759
2 жыл бұрын
Can you put down a runner rug to hide the gaps?😊
@BuildLessons
Жыл бұрын
Unfortunately at this point it would be a big runner! The gapping has continued to spread as the seasons go on... the sunlight seems to shrink these planks. I just uploaded a new video on it here. kzitem.info/news/bejne/saWLrKWlj4qkYHo
@tech4life884
6 ай бұрын
Bro, in the sun the human eye won't even look at that spot on the floor because it's too bright. Stand up and look at it. You won't see it. Your filming while on your knees. Do you and your guests walk around your house on your knees or standing up like normal people?.
@rueG
3 жыл бұрын
The moral of the story is, do not buy vinyl planks!!
@ledbetter1226
3 жыл бұрын
Trust me you don't want to mess with ceramic. Unless you're going for real hardwood Vinyl planks are pretty much the best option. Just got done tearing out my Ceramic Tiles, what a pain in the rear. They look good initially, but once they start to wear out and the grout starts to deteriorate....my god....Ill take vinyl plank gaps any day over ceramic
@carmeshacarrington6718
2 жыл бұрын
Real wood expands too with climate change.
@BuildLessons
Жыл бұрын
@@ledbetter1226 I do agree with this point. Each flooring has its downfalls, and vinyl is likely the lesser of evils. I must warn against glue down though please go click, our glue down has continued to get worse I just uploaded a 4 year update here. kzitem.info/news/bejne/saWLrKWlj4qkYHo
@BuildLessons
Жыл бұрын
The click product seems to hold up much better than the glue down!
@jackscenic
3 жыл бұрын
Do not do this!!!
@rabbit3235
2 жыл бұрын
Why not?
@BuildLessons
Жыл бұрын
In the long run it did not hold up - we are still seeking solutions for our gapping vinyl planks.
Пікірлер: 109