Very well covered and filmed. Needed a review and watched several, this is the best ...former apprentice plumber with cognitive memory issues. Thanks for posting.
@Teach2Build
8 ай бұрын
Thanks for the kind words. Best of luck on your projects!
@terryhanson4712
Жыл бұрын
Hey "T2B" .. I will tell you - this is probably the finest instructional video I have ever watched (and I have spent many years relying on KZitem tutorials !). The 'tone' is very relaxed, the presentation of the component parts is so easy to follow, and the explanation from the 'instructor' is a pleasure to listen to, because .. not only does he explain each step very clearly, but he has a style that builds the viewer's confidence in doing the same job DIY ! Seriously - Thank You "T2B" for an amazing video !!
@Skunkhunt_42
Жыл бұрын
Came h we re to say the same
@ricardosilvagni6843
Жыл бұрын
Worked as instructed. No hum but it had power. Pressed the reset, the hum come back, used the wrench, it moved and voila, back to business. Great video!!!
@SheilaFussell
2 ай бұрын
Thank you, I had it working before the video finished. My issue was solved with the reset button.
@dlyatruby7444
Жыл бұрын
My insinkerator had normal 1/4" hex hole. Saved 10 bucks on "special tool"! Tanks for helping people save some money and time!
@scotta.osborn7417
Жыл бұрын
Wow! Thank you, sir! This is EXACTLY the info I needed! You’re doing everyone a great service! 😊
@Teach2Build
Жыл бұрын
Thanks for the kind words. Best of luck with your project!
@ruscruz7976
Жыл бұрын
Thank you for clearly getting to the point
@griseldacee6939
Жыл бұрын
Thank you so much! $95 saved. You are a great teacher.
@elibadran956
Жыл бұрын
Great video, very informative! Thank you. Q: A shot glass accidentally fell into my garbage disposal; long story short, cleaned the large parts I could pull out, when turning the GD on I can hear the motor spin, but the disk doesn't; please advise. Thank you
@franklebatista1091
7 ай бұрын
Thank you well explained, and you transmit a sense of honesty.
@Teach2Build
7 ай бұрын
Thanks for the kind words!
@justonemori
Жыл бұрын
So that's the purpose of the odd tool that's been sitting in my dad's garage for the past 35 years. Thanks! I believe it was a popcorn kernel knowing him and how the wrench felt breaking it up. I duct taped the tool to the side of the cabinet and made a note with a sharpie. It's for sale soon so might as well help out the next owners. Cheers!
@MaryAnn-yi1pw
Жыл бұрын
Thank you very much for your instruction. I was able to fix the problem.
@donaldshroyer8633
Жыл бұрын
Very well done presentation. Thought through and well prepared. Answered all my questions. Thank you.
@Skunkhunt_42
Жыл бұрын
Presentation and info quality are tip top notch. Cherry on top is the relaxing style and empathetic intro
@Teach2Build
Жыл бұрын
Thanks! Best of luck on your project!
@SoniaCuadros-gj1no
Жыл бұрын
Thanks for your support ☺️ but my problem is the Garbage disposal is very noisy 😭 all the blades is ok no broken but the noise is Strong we need to replace because is new we buy 2months ago
@maithismith4499
Ай бұрын
Thank you for sharing. I fallen but the model not on. I trying different way 😂🙏
@allenRbundy
Жыл бұрын
God bless this man
@Teach2Build
Жыл бұрын
Thanks! He definitely does, every single day.
@briancameronlee
Жыл бұрын
Great info, thank you! Can you saved me!
@Teal_Seal
Жыл бұрын
Thank you so much!! ❤😄
@earth2.060
4 ай бұрын
Great video but I have a different problem with mine, it works well but wont turn off, the only way to turn it on and off is by pulling the power plug or by plugging it back in. What could be the problem?
@user-ov9uh5lk1d
Жыл бұрын
Great video
@schlamben1
9 ай бұрын
My grinder plate dislodged from my GE garbage disposal. Will I be able to take it out and screw it back on?
@Teach2Build
9 ай бұрын
Oooo, I don't know. I've never tried. Might just be time for a new one!
@TarxnG
4 ай бұрын
This guy can talk me through the end of the world
@Teach2Build
4 ай бұрын
Ha! Let's hope not...
@TarxnG
4 ай бұрын
@@Teach2Build bro this guy is hilarious, low key tho. Man’s a mastermind at talking at people 😂
@TarxnG
4 ай бұрын
@@Teach2Build oh my god it’s you 🤣😂 whaat this is the funniest thing I’ve ever watched in my life
@LeonaAngie6152
Ай бұрын
Why I have to keep using the switch sink gets full if water fast?
@twiinz711
Жыл бұрын
What if I skip the ground? I'm replacing mine and the previous home owner doesn't have a ground cord
@jaybrahmbhatt7197
9 ай бұрын
Even after doing everything just like it is explained, when I turn on switch, it doesn't start. what to do then? One time, it started and was working fine. I turned on and off switch to see it is working. It worked fine for four to five times. Then after half an hour, when I started switch on, it didn't start. This is the problem I experience. What to do? I have removed the old one and replaced it with the same Badger 500 1/2 H.P. new one. It doesn't start. What to do now?
@prakashambastha7530
11 ай бұрын
I am hearing humm sound and tried rotating the blade but its really hard to rotate it and it took enough force to rotate just a quarter...Even after that it doesn't start working and giving humm sound only..Any advise please? Thank you!
@Teach2Build
11 ай бұрын
Unfortunately, it sounds like the fan motor is seized. Best of luck with your project!
@DarkstarDarth
10 ай бұрын
Well, I tried everything in your vid but my badge 1 Humes without turning even after I tried spinning it with an Allen wrench 20 times. Is it internally stuck or motor rusted and done? Thanks.
@Teach2Build
10 ай бұрын
Unfortunately, this won't fix every one. Might be time to swap it out.
@DarkstarDarth
10 ай бұрын
@@Teach2Build …okay thx
@AAgoncillo
5 ай бұрын
solution: I used an Allen wrench (used b4 ) but for some reason it’s stuck and I cant get it out? Help!!
@BobPulgino
Жыл бұрын
So what does it mean if I put the key (¼” allen wrench) into that hole and it won’t budge at all in either direction?
@Teach2Build
Жыл бұрын
Whatever locked it up isn't playing around! Might be time for replacement...
@BobPulgino
Жыл бұрын
@@Teach2Build yeah, that’s what I was thinking … thx.
@johnholladay9769
Жыл бұрын
Mine was making the humming sound, now its just nothing. I'm assuming the motor finally gave out.
@Teach2Build
Жыл бұрын
Or it popped the circuit breaker. Best of luck with your project!
@johnholladay9769
Жыл бұрын
@@Teach2Build Thanks, I'll def check that first before replacing it
@johnholladay9769
Жыл бұрын
@@Teach2Build I was able to get it working last night, the lil breaker button on the bottom tripped. I pushed that back in and it started humming, then I found a tool to move it back and forth form the bottom and it started working. Apparently something got lodged in there. Thanks for the help.
@user-fc8iw6pc1w
2 ай бұрын
Alright, i think im ready... I got a six pack, some cigarettes, a wrench and a radio.. What do I do again?? 🥴
@dynoesaur
8 ай бұрын
Mine hummms fir a few seconds then the button trips what's wrong?
@dynoesaur
8 ай бұрын
MODE BADGER 100-1
@tonypiekarski8695
2 жыл бұрын
It called an Allen wrench
@Teach2Build
2 жыл бұрын
Nobody said it wasn't, but the tool that comes with them, and can also be purchased separately, is called a disposal key. Thanks for stopping by, and best of luck with your projects!
Пікірлер: 54