Hi Will great to see you back on a new project, I thought there was the letter A on the clutch components that needed to be lined up with the fly wheel to keep it in balance? Great work there and you’re right those last two wok bolts are a bugger to get to with the engine in, a thirteen mil ring spanner bent into shape gets you in there with a little patience. My engines coming back out again next week and off to get the gearbox sorted 👍 Take Care Stay Safe Everyone Regards Dave 👍😎🏴
@WilliamMurfitt
3 жыл бұрын
The a is only on the older style verto clutch. I hope the engine and box get sorted ASAP for you
@pinknblues1
Жыл бұрын
thanks matey very helpful am just doin one today
@WilliamMurfitt
Жыл бұрын
Not a problem, glad my video was of help
@Gimpy_501
3 жыл бұрын
Love your impact sound you make hehehe thanks for the video that's my next job in mine
@WilliamMurfitt
3 жыл бұрын
Noises are an added bonus 🤣
@Gimpy_501
3 жыл бұрын
You need to make turbo era for the sound track bonus 😂
@mikeuk1954
3 жыл бұрын
Hi Will....another mini being saved. 👍
@WilliamMurfitt
3 жыл бұрын
Thats the intention pal 😀
@davemurphy7533
Жыл бұрын
Did you put the washer and c clip back on? I saw you put the flywheel and clutch back on the crank to help when tightening the bolts. I thought oh I hope he put them on first. 👍
@WilliamMurfitt
Жыл бұрын
Yes all re fitted 👍
@ClanGunnPhotography
3 жыл бұрын
I’ll just get you to do my clutch when required 😂😂
@WilliamMurfitt
3 жыл бұрын
Would expect nothibg less from you 😘
@ludwigmorgan6049
2 жыл бұрын
Love your channel, Where did you buy that seal tool
@WilliamMurfitt
2 жыл бұрын
Minispares for the seal tool and guessworks gor the clutch puller
@CoolDog000
3 жыл бұрын
👍👍 Nice hair too 🤪
@WilliamMurfitt
3 жыл бұрын
Ha i sense some sarcasm 🤣
@CoolDog000
3 жыл бұрын
@@WilliamMurfitt actually I was serious this time. 😂. 👍👍
@WilliamMurfitt
3 жыл бұрын
@@CoolDog000 in that case cheers mate 🤣
@michalchlup6758
2 жыл бұрын
Nice work. This is SPI engine, isn't it? (I can see flywheel casing has blocked sensor hole and the flywheel has magnetic ring) I am about to swap my 998 for 1275 SPI using carb and I was wondering two things: 1) you linked 180mm clutch ,but that should be only for engines pre-1990, shouldn't 190mm kit (CK9378) be used after that? 2) do you know if starter motors are same for carb and SPI engines? I would assume they are (pre-engaged type) but I heard that the SPI has different number od teeth on the pinion?
@WilliamMurfitt
11 ай бұрын
That’s it yes
@graemew7001
3 жыл бұрын
In your element there Will, it's always so much easier to do these jobs when the engine is out of the car and you're not restricted by access and space issues. How's that new job of yours going in that place that looks like petrolhead heaven?
@WilliamMurfitt
3 жыл бұрын
100% these jobs have been put forward based upon the engine being out
@WilliamMurfitt
3 жыл бұрын
Job is going great i couldnt ask for better to be honest 😃 thanks for asking 👍
@graemew7001
3 жыл бұрын
@@WilliamMurfitt No worries mate, it's great to be going into work and not going ugh! about the day ahead......I'm doing the ugh! atm but it should hopefully be getting better soon.
@elwynrowlands9486
Жыл бұрын
No clutch seal protector shield? Optional, I suppose?
@Spud75223
11 ай бұрын
I hope you realize how infuriating it is to see your flywheel come off so easily! When I tried to tighten that center bolt the three bolts holding the flywheel puller on all decided to loose their threads completely. Great video!
@WilliamMurfitt
11 ай бұрын
Ha ha I’ve had my fair share of stubborn clutches too, the guessworks puller sure helps with that and makes life easier
@isaacdenston-flynn3577
2 жыл бұрын
Hi do you have a link for the clutch kit as I can’t seem to find one for my 1996 mini
@WilliamMurfitt
2 жыл бұрын
1996 will be a verto style clutch kit, i purchased this from mini spares. www.minispares.com/product/Classic/Clutch/Verto%20type/CK9035.aspx?0607&ReturnUrl=/search/classic/Verto%20clutch%20.aspx|Back%20to%20search
@phillipplant8212
3 жыл бұрын
What model is your dewalt ugger dugger gun ?
@WilliamMurfitt
3 жыл бұрын
This is the one i purchased it has some fantastic stats and shares a battery with my drill which is handy www.ebay.co.uk/itm/DEWALT-DCF899N-XR-Brushless-High-Torque-Impact-Wrench-18-Volt-Bare-Uk-Stock-/252124947560?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l6249&mkrid=710-127635-2958-0
Пікірлер: 32