you may be the best fisherman that explains stuff ever.... seen them all, but you explain it for FISHING...regular old fishing. thanks!
@The_Garmin_Guru
5 ай бұрын
I appreciate the kind words
@chaguie07171959
5 ай бұрын
First and foremost the introductory Garmin Guru graphics are off the charts. My compliments to the graphic designer.
@The_Garmin_Guru
5 ай бұрын
I appreciate that friend
@capital613
4 ай бұрын
Just bought a lvs34 with diy pvc pole now i know it doesn't matter how deep the transducer. Great info 👍
@danayo8852
5 ай бұрын
I have played with install depths and think I can contribute. You (Randy) says that lower the install depth will help to see the splash down closer to the boat. I think it is the opposite. My transducer is 6” below the water, measured from the top of the transducer. Splash down is ~6.5’ from the transducer. The depth in my Sonar Settings is 0.5’. I used to be concerned about hull interference when the pole mounted transducer is set high and is aimed towards the opposite side of the bow. I was concerned that the sonar beam would hit the bottom of the hull. This has become a non-issue since it is not practical (almost impossible) to accurately drop the jig in the scope zone when fishing the opposite side of the hull. BTW - I vertical jig with a pole mount. For me, it’s a waste of time to try to scope this way. Another big plus to raising the transducer is that it is less likely to hit underwater objects. I hope this helps someone. If you disagree please comment back. I am always ready to learn… Danny
@Lakeshak2000
5 ай бұрын
Great video! I was wondering about this.
@olanlunn8284
5 ай бұрын
Awesome information
@spikesb1
5 ай бұрын
Good information!
@The_Garmin_Guru
5 ай бұрын
Glad it was helpful!
@floydcaddy4411
5 ай бұрын
That was real good
@patrickonasis1
5 ай бұрын
What should I set my install depth to in order to see my bait hit the water? Can you explain how that works cause I’ve been told to set the install depth deeper like 3 feet but to me that seems the opposite. Thanks
@The_Garmin_Guru
5 ай бұрын
In this video I’m talking about actual install depth but I’ll tag a video for you talking about what you’re asking for
@The_Garmin_Guru
5 ай бұрын
Garmin Livescope: Install Depth And How It Helps See Your Bait In The Water kzitem.info/news/bejne/0KCwtoaVfHVjqZg
@billynoble9053
5 ай бұрын
Hey Guru good comparison, I received my.package beautiful cap and fantastic baits Stay SAFE
@TheFISHIN14
5 ай бұрын
Great question!
@fishingusa2051
3 ай бұрын
Do you have your bottom depth turned off all I see is water temp and time.
@The_Garmin_Guru
3 ай бұрын
@@fishingusa2051 yea why would I need water depth on?
@ppdrawings
5 ай бұрын
The issue to me would be : is 0 still 0 when the transducer is installed at different depths?? ●●● or am I,, for example,, dropping 12 feet of vertical line that's showing up as 10 or 11 feet based on transducer depth - ? 🤔
@The_Garmin_Guru
5 ай бұрын
That’s where setting your install depth on the unit comes in.
@ppdrawings
5 ай бұрын
@@The_Garmin_Guru Wow!! Never heard of it - but I've only had LS for about 3 or 4 weeks - Thank You!!!
@The_Garmin_Guru
5 ай бұрын
@@ppdrawings I have almost a thousand videos on my page for almost every subject. Check out the page and subscribe bud
@ppdrawings
5 ай бұрын
@@The_Garmin_Guru Will Do!!! Definitely!!!
@quintriggins6557
5 ай бұрын
So, you always set your install depth to zero on your graph, or did I misunderstand. Thanks
@The_Garmin_Guru
5 ай бұрын
Naw I just did it for the test. I set mine to 2.5. I talk about that in another video
@quintriggins6557
5 ай бұрын
I had seen the video you referenced, but I thought you might have changed your thoughts on that. Thanks
@The_Garmin_Guru
5 ай бұрын
@@quintriggins6557 no I just did it for the video so they would be the same being that they were different depths in the water
@boydreynolds2635
5 ай бұрын
Are you using the Ultra @ Monitors? If so are they that much better?
@The_Garmin_Guru
5 ай бұрын
I use an NBT marine monitor
@ChuckJohnsonFishing
5 ай бұрын
What color pallet is that?
@The_Garmin_Guru
5 ай бұрын
Rusted steel my friend
@chrisgaskin9088
5 ай бұрын
Can I get e email I got simple question on my steady cast and calibration for my screen pointer
Пікірлер: 32