Well as a ex Navy jet engine mechanic. Everything looks great with only one serious flaw . The exhaust fan should be one piece, the the size of the the engine. Yes the design does work in larger engines because not only are they pressed in but they locked with locking plates on both sides. Your design could prove dangerous because of centrifugal force and high temps will cause the metal to ( creep) or warp. Even in military application this design can fail when the engine is pushed hard or fuel regulator problems occurred. But other than that you work is professional grade.
@hucklo
5 жыл бұрын
Eran Jones Im aware of that so it’s welded into place but it wont take super higt rpm due to centrifugal force acording to my simulations. There are many other mistakes and dumb design stuff to but it was just a quick and fun project 🙂 If i make another one It will be much more thought trough.
@eranjones5994
5 жыл бұрын
@@hucklo very good, I'm still working out some bugs too. Whether to use a oil system or use the fuel as a lubricant before it's burned. The later is more economical, weight and space wish but more labor intensive. I'm to do the jet pack thing and not burn or blow myself up. If you hear in the news: man blows himself up while trying to fly it probably will be me !
@hucklo
5 жыл бұрын
Eran Jones well as long as you get the explosion on KZitem everything is good!😉
@eranjones5994
5 жыл бұрын
@@hucklo I can hear you now! Hey I know that dumb ass.lol
@iloverush123
5 жыл бұрын
I usually skip these kinds of videos of "homemade" turbines because they're air assisted blowtorches if they aren't turbos but this is the first I've seen that actually has a good chance of running. Nice work dude.
@hucklo
5 жыл бұрын
Josh Moss thanks, the assisted blowtourch guys dont have a cnc at home i guess :-)
@Rustlet101
Жыл бұрын
hey man. i think your projects are super cool! not many make jet engines at this scale. if only you had better film equipment. than it would be so much more cool to see the process.
@hucklo
Жыл бұрын
Thank you, wish I had the time to make new projects!
@hucklo
4 жыл бұрын
For the guys asking for CAD drawing please just read the description.
@johnjash7407
4 жыл бұрын
Where can I get
@johnjash7407
4 жыл бұрын
File failed 😭 to download
@hucklo
4 жыл бұрын
John Jash try another browser, it works fine for me.
@ntablist
5 жыл бұрын
Whats the thrust this beauty generates.
@maribelquinones640
6 жыл бұрын
Impressive work but it looks too heavy
@stocky9218
4 жыл бұрын
Doesn’t need to be light to make thrust or run
@jesusdavidcaraballomendez47
5 жыл бұрын
Con esos equipos se hace lo que sea. Así quien no hace una rueda de turbina
@user-rl7ph7bs3c
Жыл бұрын
جميل جدا ⚘⚘
@jimmyfavereau
6 жыл бұрын
beautiful!
@coc7711
6 жыл бұрын
Can u tell ua what type of aluminum did u use in every parts and what type of metal did u use in ur combustion liner?
@ardaylmaz3022
4 жыл бұрын
Do you share blueprint? and Plans
@hydra7013
4 жыл бұрын
Did the engine work if I made the outer blades of diffuser in straight form without curve ?? Thank you .
@CharisMR
6 жыл бұрын
Respect
@Digglets
4 жыл бұрын
hi guys, a quick question please. Can these turbine be used as electricity generator? where to find such a high speed alternator? cheers
@NoName-ip4tt
4 жыл бұрын
Hi This is an amazing work! Which type of material did you used for turbine. I saw individual blades for turbine assembly (3.24), and I wonder its material
@hucklo
4 жыл бұрын
Zama Zingo ss 2346 but i would recommend using inconel for longer lifespan.
@NoName-ip4tt
4 жыл бұрын
@@hucklo Thanks for your reply. When I search Inconel material, I saw different type numbers. Do you have any preference for inconel as gas turbine material? (e.g Inconel 690, 718, 725)
@hucklo
4 жыл бұрын
I would go for 718. FYI it Will eat your tools like crazy!
@NoName-ip4tt
4 жыл бұрын
@@hucklo Thanks you detailed answer!
@knowledchanel4746
6 жыл бұрын
Greatest
@kenyachristianapologeticsp9635
Жыл бұрын
How can someone contact you? Kindly advise.
@anlpereira
6 жыл бұрын
Great video. What is the material used in the turbine blades? Does aluminum works? And what is the name of this mill bit? Thanks
@hucklo
6 жыл бұрын
Anderson Lima ss 2346 or 304. Aluminum won’t work. Witch mill bit are u refering to? Flat end radius or the keyseat cutter?
@anlpereira
6 жыл бұрын
Hucklo the bit you show at 0:24. I already have a 3 axis CNC machine. I want to build this turbine like you did. Thanks a million
@hucklo
6 жыл бұрын
that's a keyseat cutter with radius. not sure about the dimensions 0,5 should be fine, if you gonna use it on a daily basis i recomend u to use inconel as material, it eat tools but can withstand high temps. Also remember the thermal expansion between the parts
@Diogo-dt1uf
5 жыл бұрын
What bearings are you using dude?! Have you already gotten the engine to self sustain!?
@hucklo
5 жыл бұрын
Diogo Ferreira Lopes GRW ceramic full complement bearings. Check out the outher videos where it self sustains.
@Diogo-dt1uf
5 жыл бұрын
@@hucklo Nice bro... checked it and it runs smoothly.... would you have a part number/code for the bearing or could point me to the place where you bought it from!?
@humbertomonteiro6742
5 жыл бұрын
@@Diogo-dt1uf www.ebay.com/itm/173834916466
@nithins6898
4 жыл бұрын
Did you use 5-axis CNC for crafting Stator and Rotar blades ?
@hucklo
4 жыл бұрын
Nithin S nope just a 3 axis. It’s to easy to make it in a 5ax ;-)
@nithins6898
4 жыл бұрын
@@hucklo I'm actually building your Engine as my final year project now...! I'd really appreciate if you can share MasterCam codes and other supporting files of the project, If possible. 🙂 And thx for your previous reply.
@hucklo
4 жыл бұрын
Nithin S I don't have any files left from this project more then the step file in the description. There's no tolerances, but I guess you can figure them out. Good luck with your engine, I'll try to answer if you have any questions.
@rutvikpatel1511
4 жыл бұрын
Can you send programming measurements to make this in CNC
@hucklo
4 жыл бұрын
Rutvik Patel not sure what you are asking?
@galaxymyt4834
4 жыл бұрын
Make bigger size of this with 20000N trust
@user-os5eg6wd8q
5 жыл бұрын
how did you cut the side wing(?) of the impeller?
@hucklo
5 жыл бұрын
I didn't manufacture the impeller, cheaper to buy than milling it 5 axis.
@user-os5eg6wd8q
5 жыл бұрын
Hucklo no, i mean the plate which the impeller is mounted at. The one that you fastened the plate with a vise sideway
@hucklo
5 жыл бұрын
Ahh okey i just used a small fixture to index it, it is easier to make in a 4 axis though.
@WINMOLD1189
4 жыл бұрын
Can you provide to me cad draw
@onurpoyraz3133
5 жыл бұрын
How can ı contact you ????
@jessjess3369
4 жыл бұрын
I even cant afford a wrench.And this video shows using cnc machine
@hucklo
4 жыл бұрын
Jess Jess a wrench is way more expensive than the CNCs I have ;-)
@jessjess3369
4 жыл бұрын
Peelroller how so?
@hucklo
4 жыл бұрын
Jess Jess you take a loan on the cnc but not the wrench (bad joke I know).
@jessjess3369
4 жыл бұрын
Peelroller ur sarcasm is terrible.But having a loan for a cnc is more terrible.😂🤣
@davidculmer1520
Жыл бұрын
We can do without the music!
@fabricevandroux4311
6 жыл бұрын
Material of the turbine blades?
@hucklo
6 жыл бұрын
Fabrice Vandroux ss2346
@aniszed3641
4 жыл бұрын
Can you sell me one ? how much it cost ?
@hucklo
4 жыл бұрын
anis zed I don't sell these, check out the commercial rc engines, they are way cheaper.
@Killerabekat123
7 жыл бұрын
size of the compressor wheel? :) very interested in your work
@hucklo
7 жыл бұрын
Killerabekat123 Hello the compressor fits Mitsubishi TD05H-18G turbo. 68 mm out, in I don't remember but I can check it if you want?
@Killerabekat123
7 жыл бұрын
tried to find the specs on the TD05 18G and that seems to be compressor inducer is 50.5mm and exducer 68mm :) is this correct? www.enginebasics.com/Advanced%20Engine%20Tuning/Turbo%20Chart%20Mitsubishi.html
@hucklo
7 жыл бұрын
Killerabekat123 sounds correct :)
@Killerabekat123
7 жыл бұрын
Did you calculate yourself the geometry for the exhaust side turbine? or maybe you used some schematics or program to find out? :) if so, do you still have them/it?
@Killerabekat123
7 жыл бұрын
One more thing.. how did you know that your compressor side (TD05-18G) was the right size, and not to big/to small? :)
@DandSCreations
6 жыл бұрын
would you sell the .stl files ?
@hucklo
6 жыл бұрын
You can download KJ66 drawings, its not the same but almost. I made a lot of mistakes in my drawing so it's not exactly the same. Write your email and I'll send it to you when I have time.
@DandSCreations
6 жыл бұрын
+Hucklo steven.main@ymail.com thanks man how many axis cnc is needed will 4 work?
@MrAliCAN6566
6 жыл бұрын
Hi, can you send me stl files too, please email mralican6566@gmail.com Thank you very much.
@atombomb393
5 жыл бұрын
can you also send me it by a chance … adamburris01@gmail.com
Пікірлер: 93