I like the fact that gateron continues to improve their switches
@gtacrafter0079
2 жыл бұрын
the crickets in the typing sound test made it so much better
@weeeeendyyyss1715
2 жыл бұрын
Hey, I'm planning to get milky pro yellows, but how do they compare to clear pro yellows? Is there any difference? The board I pre-ordered came with clear pro yellows, so I'm hesitating to buy the milky ones. Thanks!
@pusakalmkb
2 жыл бұрын
Not too big of a difference. Stick with what you have first.
@iOSRider4983
3 жыл бұрын
Sana umabot 9.9 ahahaah
@Hoserzzz
Жыл бұрын
Why tf did you waste my time with the ironing board
@LionAnt_Ace
3 жыл бұрын
Love how my man gives an ironing tutorial really helpful ngl
@1ancer
2 жыл бұрын
I was confused when i read your comment before I even started the video
@panikk2
Жыл бұрын
@@1ancer this is why you never read comments until you watch the video. You get spoiled on the fun unexpected stuff
@gnr8jj
2 жыл бұрын
i really enjoyed the ironing tutorial! the extra switch review is fine too :)
@pusakalmkb
2 жыл бұрын
AHA!
@cleangoblin2021
3 жыл бұрын
These are the first switches im buying. Ive used blue outemu for four years because i could care less and those things were tanks. Then early 2021 i switched to outemu reds. No matter how much time i spent with it, i was really prone to errors with how soft the reds are and Outemu reds are total crap when it comes to durability. I have the rk987 now and their in-house brown switches are pretty good and their new stocks seems to have no problem with stabilizers. However, the switches have really shallow actuation. It feels weird as it activates as shallow as a mouse click but they do sound nice. Im actually afraid to try linear once again with Gateron milky yellow pros but lets see. I ordered 20 bucks worth of it :P Sorry just wanna tell things as if i have someone to listen and im drunk
@pusakalmkb
3 жыл бұрын
Hahahaha I'm listening bro, we can talk over discord if you like
@cleangoblin2021
3 жыл бұрын
@@pusakalmkb Nyaow. Noypi ka pala. DI ko napansin, ang bougee ng presentation. Would love to join over at discord pero may nag premiere na bagong kanta ni Zild. Great review
@pusakalmkb
3 жыл бұрын
@@cleangoblin2021 hahaha g boi. See you there
@markceu_
2 жыл бұрын
Do these switches have any interference with north facing led and cherry profile keycaps?
@ramiru3264
2 жыл бұрын
I would like to know too
@nilconstant2
2 жыл бұрын
On someone's comment they said that it doesn't have interference
@FrankSeton
2 жыл бұрын
I liked the ironing intro more then the actual vid cuz it was a really good tutorial and I learned very much! Actually subscribed!
@TheMrInadecuada
2 жыл бұрын
Hi! Really grateful for your work. Impeccable quality. Is it possible for you to make such a complete comparison between akko cs linears?
@hiroyashii
2 жыл бұрын
Awesome video! But do they still interfere with Cherry Profile keycaps?
@pusakalmkb
2 жыл бұрын
No interference since they used a new mold for the housing
@hiroyashii
2 жыл бұрын
@@pusakalmkb thank u so much!
@calvinyip364
2 жыл бұрын
I got the akko matcha green, and radiant reds. Are they more smoother and more clacky compared to the pro milky yellow? Or the SMD version of the yellow? What's your opinion. Thinking of getting it. If it sounds and feel similar I would just skip it.
@andu5852
2 жыл бұрын
Hello, Do you prefer SMD Gateron Pro yellows or Gateron milky Yellows? Are both of these similar in terms of smoothness? Which one is quieter and what is more likely to give that thocky sound signature? Should I also keep the factory-lube or manually lube it again? Sorry for the long question, i'm currently building my first mechanical keyboard so I want to get some knowlegde first. Thank you in advance!
@pusakalmkb
2 жыл бұрын
I prefer SMD Pro since I like louder sound, and would suggest not to manually lube it. The factory lube is perfect. But that's only my preference. You can try it.
@andu5852
2 жыл бұрын
@@pusakalmkb Thank you my friend
@dylankong2704
2 жыл бұрын
Will the gat pro milky yellow block rgb if my keyboard has rgb?
@maikel2424
3 жыл бұрын
Maraming salamat sa tutorial kung pano mag plantsa pusa
@AnzelLmao
3 жыл бұрын
Heard these were awesome! Love your coverage on these switches, I've been looking at em!
@pusakalmkb
3 жыл бұрын
Thank you for watching mahboi!
@starplatinum1827
2 жыл бұрын
what is more thocc Gateron yellow Gateron yellow PRO Gateron milky yellow pro Gateron milky yellow CAP V2 akko jelly black akko jelly blue
@CarlGonzalesGuitar
3 жыл бұрын
AKKO Rose Reds vs Gateron Pro Milky Yellows? They're at the same price range. How do they compare? Thank in advance. Currently torn between the two of them.
@joshua6190
2 жыл бұрын
im changing my akko rose reds idk what happened but some other switch not working when I press is it a switch issue or what? sorry newbie
@evilsmileyface
3 жыл бұрын
Do they reduce the spring ping or remove them entirely?
@pusakalmkb
3 жыл бұрын
No ping was heard on my tests :)
@yoso_o2685
Жыл бұрын
Thank you so much, I learned how good gateron yellow sounds AAAAND how to iron your wifes uniform
@kevinmontero4158
2 жыл бұрын
Does gat milky yellow pro (factory lubed) sound significantly louder than regular milky yellow? I brought these milky yellow pro recently, hoping they are not loud like smd yellow pro. I already like the light thocc from regular milky yellow.
@Nat-vs1pc
3 жыл бұрын
Have you tried the cap milky yellows? I'm interested to see how it compares to these switches
@pusakalmkb
3 жыл бұрын
cap yellows not for me mahboi, they are quite stable than the classic yellows but I don't like the feel of it
@bl4nkspace0
2 жыл бұрын
That intro was fireeeeee how do you only have 3k subs?!? your editing is amazing, keep it up!
@pusakalmkb
2 жыл бұрын
RIGHT????
@theblobnation3219
Жыл бұрын
came for the switches, stayed for the ironing 😎
@TitaniumTronic
2 жыл бұрын
Hellol which do you think has a deeper sound? Akko jelly black or gateron pro milky yellows?
@pusakalmkb
2 жыл бұрын
Pro milky. Jelly black is clack
@lawbinson
10 ай бұрын
Weird to hear “The Starters / No Dunks” music at the end lol
@1stRanger
3 ай бұрын
That keyboard sound is horrible tbh no matter the switch.
@JordanLanuza
3 жыл бұрын
Awesome! For cleaning them how do you suggest doing so without using an ultrasonic cleaner?
@pusakalmkb
3 жыл бұрын
I updated the description, the one from squishy are dry I am so mind blown right now
@JordanLanuza
3 жыл бұрын
@@pusakalmkb i knowwww i just had a chat with squishy too. and now I am so conflicted. the yellow pros or the jwk blacks @_@. Thanks for answering bro :)
@pusakalmkb
3 жыл бұрын
@@JordanLanuza no biggie mahboi!
@elliottw.7407
2 жыл бұрын
He paused mid way through the video to give an ironing tutorial 💀💀
@shakir4969
3 жыл бұрын
Gateron milky yellow with black bottom is really good. I think this stem will make it much better.
@pusakalmkb
3 жыл бұрын
I think they will make one later on
@HeK.
2 жыл бұрын
Is there any reason to go with the black bottoms anymore?
@carterbyrd7111
Жыл бұрын
please respond I see this is a year ago so I might have no luck of you responding but which ones are thockier/deeper sounding the pro or the classic???
@marcowein1239
3 жыл бұрын
Hey man, nice comparison! Do you know if the milky tops of the pro switches are the same as the tops from the classic? Im hoping they aren’t drastically different molds since I want to make frankenswitches.
@pusakalmkb
3 жыл бұрын
Gateron said they used a new mold, but I don't know if they are talking about the stems or the shells.
@BurittoSandwich
2 жыл бұрын
Which of the pro yellows would you recommend? The clear top or the milky?
@pusakalmkb
2 жыл бұрын
depends if you want a deeper tone use the milky
@kokovideo404
Жыл бұрын
Would these work for silent switches? Im wondering if they would be quiet enough to get instead of silent alpacas since i like the sound of these
@sanje_23
3 жыл бұрын
Not your typical keeb mods channel! Wellplayed! 💯👌🏽
@CaptainLide
2 жыл бұрын
Those cherry profile keycaps don't interfere with these switches? TOM680 has north facing leds no?
@whyno1likepuns146
2 жыл бұрын
I hope they sound better than my obviously scratchy spring pingy gateron pro browns
@jj-20303
Жыл бұрын
does the light still show clearly through the key caps? i like to have a light show while gaming 🤩
@TheChrisDecember
2 жыл бұрын
Hi thanks for the video! Which is deeper / thockier? KS9 2.0 Pro Yellows or KS3 Milky Yellows? Thank you!
@gigsymon
2 жыл бұрын
Hello, does it have interference with North facing LED and cherry profile keycaps?
@pusakalmkb
2 жыл бұрын
None so far.
@Souls4Roca
Жыл бұрын
So the pros are closer to the new mx spitfire that is in the corsair k100
@chillzone5459
3 жыл бұрын
Sana all may taga plantsa ng damit :( i badly need one too XD I really love the thocky sound
@ARCHONFella
2 жыл бұрын
Do Gateron Pro Milky Yellow switches have interference for Northfacing LEDs on Cherry MX keycaps?
@pusakalmkb
2 жыл бұрын
5:27
@TankTastic
2 жыл бұрын
Came for keys, left with knowledge to open a laundry mat
@genova_rb
2 жыл бұрын
I like how you iron your shirt lol
@patrpatl
2 жыл бұрын
pusa, aso, kalabaw?
@the-weeknd-xm
2 жыл бұрын
These crickets are not in the plot but I love the sound actually :v
@chubz1779
2 жыл бұрын
I am thinking about buying the keychron k8 mechanical keyboard with gateron pro brown switches is it worth to buy these switches as well and swap the gateron pro brown switches out or would i be wasting my money?
@pusakalmkb
2 жыл бұрын
Try looking at the keychron v1 instead 😺
@joevincenttitular7564
2 жыл бұрын
Salamat sa budol this payday sale papi, waiting na lang dumating with feker ik75
@pusakalmkb
2 жыл бұрын
Nakjo bagay na bagay yan sa ik75!
@joevincenttitular7564
2 жыл бұрын
Thank you po and Godbless!!
@martydv362
3 жыл бұрын
Pro tip. Sleeves muna sir tapos collar, rear then front. Hahahaha kidding aside. Great content very relatable. Hahaha
@pusakalmkb
3 жыл бұрын
Hahahahahaha will take note of that!
@timq16
2 жыл бұрын
Probably going to buy K8 and mod it with this and add some foam
@beesong2450
2 жыл бұрын
Where can I buy that artisan vol knob sir?
@pusakalmkb
2 жыл бұрын
Hehe it’s just an eraser with design I found at a surplus store
@1dlematt
2 жыл бұрын
can you do a side by side comparison of gat milky pro yellow and jwk blacks? im stuck with those 2
@XanaReia
2 жыл бұрын
do you prefer this or jwick black ultimate?
@keyman6136
2 жыл бұрын
Gustavo uniform
@d.x.s.t.i.n
2 жыл бұрын
Wait this man is filipino. Big respect man. Im filipino!!
@jyz1298
2 жыл бұрын
Any gateron switch that has that thocky sound fits to my rakk ilis?
@pusakalmkb
2 жыл бұрын
no gateron fits the rakk ilis' outemu socket
@jyz1298
2 жыл бұрын
@@pusakalmkb any recommendations for a thocky switch for rakk ilis sir? I really love your contents just got subscribed on your channel days ago ❤️
@presented694
2 жыл бұрын
I know I'm late but do you prefer these over ktt strawberry?
@pusakalmkb
2 жыл бұрын
ktt strawberry suits my preference really well. the milky is too quite for me.
@presented694
2 жыл бұрын
@@pusakalmkb oh OK ty
@benjaminlee3075
2 жыл бұрын
malewifegoals
@samu1516
2 жыл бұрын
instead of looking switches i got a ironing tutorial
@nelforeign
2 жыл бұрын
I am between ordering Gateron Yellow Linear Switches or Gateron KS-3 Milky Yellow Pro Linear Switches. I dont want to lube so will be using factory lubed. Which do you like more between the two? Also do the regular gat yellow sound good factory lubed?
@pusakalmkb
2 жыл бұрын
I like the SMD more milky is too silent for my taste.
@nelforeign
2 жыл бұрын
@@pusakalmkb What is the SMD?
@vaxiit
2 жыл бұрын
Sold
@aabri
2 жыл бұрын
wait i’m watching this on a sunday…
@pusakalmkb
2 жыл бұрын
time to iron thy clothes
@thesangreal6527
3 жыл бұрын
hello would like to ask if you are using a cherry profile keycaps? no interference po ba?
@pusakalmkb
3 жыл бұрын
Wala po 1.3mm lang thickness kasi nung keycaps ko
@gl-rw8rl
2 жыл бұрын
can I ask, should I get the gateron milky pro yellows or the akko cs lavender purple?
@pusakalmkb
2 жыл бұрын
they are different switch type gat pro is linear and akko lavender is tactile so they can't be compared.
@rhythmkeebs
3 жыл бұрын
KUYAAA MAY BAGONG RELEASE YUNG REDRAGON!! FIZZ YUNG NAME TAPOS HOTSWAPPABLE DAW? Huhuhuhuh gusto ko manood ng review kaso wala pang nag upload HAHAHHA SANA MAGAWAN MO NG VID KUYA!!
@pusakalmkb
3 жыл бұрын
Onga ehhhhhh nasa data blitz na bili ako bukas hahahaha
@rhythmkeebs
3 жыл бұрын
@@pusakalmkb yayyyy hopefully magawan mo ng video hehehe
@IadiiI
2 жыл бұрын
would you suggest relubing it or just stock or even removing factory lube and applying your choice of lube
@pusakalmkb
2 жыл бұрын
If they came in with factory lube, you may try it first if it could pass your taste if not then you may try to lube them
@CarlGonzalesGuitar
3 жыл бұрын
is this a sponsored video?
@louismiguel8432
2 жыл бұрын
which is the best, pro milky or milk? not sure which should I get bretween
@pusakalmkb
2 жыл бұрын
always choose the Pro version, newer mold, and no cherry profile interference on north-facing switches.
@унтамхайфилософич-у3р
2 жыл бұрын
i subscribed cus ironing tutorial was so good
@groovn5635
3 жыл бұрын
ok po ba sa outemu if okay po what switch is better ktt wine red or this one for thocks?
@pusakalmkb
3 жыл бұрын
Di pwede sa outemu to boi :( medyo malapit dito na feel sa spring yung radiant red
@ren011896
3 жыл бұрын
buti nag release sila ng bagong top housing na wala issue sa north facing w/ cherry profile keycaps. Same ng gat yellow pro also ung gamit sa Tecware b68 Gateron Pro Series na rin kaya walang interference sa north facing w/ cherry profile keycaps. pa tinignan nyo medyo may curve ung ung top housing tapat ng lift .
@pusakalmkb
3 жыл бұрын
1.3mm lang kasi kapal nung clone na keycaps kaya baka naging exempted hehe, check ko difference sa housing now
@vahnyuri4762
3 жыл бұрын
@@pusakalmkb interested for the confirmation of this aswell, if pwede pa update rin dito sir, maraming salamat
@gkhang3004
Жыл бұрын
are there any interferences during typing on a north facing led keyboard?
@pusakalmkb
Жыл бұрын
for the Pro line there's none and other succeeding switches that uses the same mold.
@yowko670
3 жыл бұрын
I am currently using these and I am SOOOOOOOOOO IN LOVE WITH IT edit: I use this switch for like 2 months now, I notice like 0.001% of scratchiness + it is so smooth that my butter can melt 😋😋 and ur hand will feel like its jumping on a trampoline :>
@renzoesteban8600
2 жыл бұрын
does it thock? i bought this and they said this would thock
@cart.t
2 жыл бұрын
@@renzoesteban8600 switches make a tiny difference in sound
@ArmenianCwalk
2 жыл бұрын
@@renzoesteban8600 lubing helps make it thock
@renzoesteban8600
2 жыл бұрын
@@ArmenianCwalk hahahahha went out of the linear gang and loved boba u4t's! they def thocc
@BlakeRothman
3 ай бұрын
@@cart.twhat ???
@donyco3687
2 жыл бұрын
is it necessary to remove the factory lube before lubing it on your own?
@pusakalmkb
2 жыл бұрын
Not necessarily. But for the pros you can first try spring lube first if it works for you then you can skip the others.
@sohanmandal3181
2 жыл бұрын
you have the milky yellows in north facing direction and you have cherry profile keycaps , do you find any inteference with these switches with cherry profile keycaps ? because im thinking of buying these switches but i have a royal kludge rk68 wich has a north facing pcb and want some cherry profile keycaps.
@pusakalmkb
2 жыл бұрын
They are gateron PROs. New mold. No interference.
@sohanmandal3181
2 жыл бұрын
@@pusakalmkb is there inteference with the classic one ?
@pusakalmkb
2 жыл бұрын
@@sohanmandal3181 yep
@firstname4082
2 жыл бұрын
Should the milky yellow pros still be filmed?
@1700tt
3 жыл бұрын
Please try gateron cap milky yellow v2
@michaellamagnaye7391
2 жыл бұрын
Will the rgb be as pretty if i switch to this from my stock rk blues?
@pusakalmkb
2 жыл бұрын
Yeah. Better if you have a white plate too. But in overall these are better than any RK switches not just for the RGB also for the feel and sound
@husainyard
3 жыл бұрын
which do you prefer, milky yellow or KTT wine red?
@mcl8970
2 жыл бұрын
Are these switches optical
@pusakalmkb
2 жыл бұрын
Nahh bro they mechanical
@Acorniscute
2 жыл бұрын
I liked the part where you reviewed the Gateron Pro Milky Yellows.
@kinoz08
2 жыл бұрын
any interference with these switches with cherry profile keycaps on northing facing ?
@pusakalmkb
2 жыл бұрын
none so far tried on 1.3mm thick ones
@karoljosefgutierrez18
3 жыл бұрын
oh dangggg might grab some for the new B68 I just got
@p.e.r.c.y
2 жыл бұрын
Do you think it would be worth filming these? I know some other Gat stuff you do but with the new housing are they decent as is?
@pusakalmkb
2 жыл бұрын
you can still film it for sound isolation even it's tight enough not to film
@SpongleBob5
3 жыл бұрын
Can you put the gateron pro switches in the rakk ilis to see if it fits.
@pusakalmkb
3 жыл бұрын
it won't fit, they still have the standard gateron pins
@luispadilla2842
2 жыл бұрын
how did you deal with interference with cherry profile keycaps in north facing configuration?
@pusakalmkb
2 жыл бұрын
Ohhh. Gateron dealt with it. Changed the housing mold to avoid getting in contact with the keycaps.
@luispadilla2842
2 жыл бұрын
@@pusakalmkb interesting thanks for the info.
@iavyy
3 жыл бұрын
the wobble still bothers me on the milky pros, have you tried filming them?
@pusakalmkb
3 жыл бұрын
Not yet, I might lube them but not film. It's good enough for me. I suggest you get the SMD pro instead. Much more stable. :)
@steffi9944_
3 жыл бұрын
Have you tried Akko CS Matcha? If yes po, what do you prefer between that and this Gateron Milky Yellow? Thank you so much!
@pusakalmkb
3 жыл бұрын
Yes I have, I prefer this than the matcha only if the board is not outemu-socket. Since gaterons won't fit outemu socket keyboards but akko matchas do.
@steffi9944_
3 жыл бұрын
@@pusakalmkb thank you!!! Will keep this in mind, buti nalang same board yung bibilhin ko to make my first custom keeb di na ko mag worry if compatible ba ☺️
@kalamidaddy6585
2 жыл бұрын
Is it worth manually re-lubing these switches?
@pusakalmkb
2 жыл бұрын
Only if you are not satisfied with the pre-lube :)
@pscdw
2 жыл бұрын
Does the Milky yellow pro and classic allow RGB to shine through them????
@pusakalmkb
2 жыл бұрын
aye aye
@pscdw
2 жыл бұрын
@@pusakalmkb is that a yesq?
@pusakalmkb
2 жыл бұрын
@@pscdw yes
@pscdw
2 жыл бұрын
@@pusakalmkb oh thatnks but i think its to late sadly i found out that mmy switches are soldiered in...
@pusakalmkb
2 жыл бұрын
@@pscdw ohhhh damn. F
@andreizapatero404
2 жыл бұрын
where do you buy the left customize keycaps?
@pusakalmkb
2 жыл бұрын
They’re pencil erasers.
@mehhh2204
3 жыл бұрын
Gateron Pro Milky Yellow, Akko Radiant Red, or KTT Wine Red? Which switch has a deeper sound?
@bbrr12
3 жыл бұрын
i think that KTT Wine Red, but keep in mind that the Pros are much smoother
@pusakalmkb
3 жыл бұрын
Gat pro milky because of the full nylon housing.
@gt451
3 жыл бұрын
nag plantsa amp HAHAHAHAHAHA
@bruhhhhhh08
2 жыл бұрын
do you recommend lubing the pro switches?
@pusakalmkb
2 жыл бұрын
Hand Lubing will always be better most especially if you have your own method of doing it. But for a beginner the Factory lubed Pros are good to go.
@mikeyporto
3 жыл бұрын
sponsored ni misis haha
@quaxcd4306
2 жыл бұрын
İs it stock?
@pusakalmkb
2 жыл бұрын
yesss
@keoo5290
3 жыл бұрын
Stock jwick yellows or lubed gateron milky yellows
@pusakalmkb
3 жыл бұрын
Haven't tried Jwick yellows but these are good enough for me as a tactile guy :)
Пікірлер: 263