Really enjoyed your video, very helpful and informative information. I really appreciate the insight on the weight of the blades and the consideration for using them on lighter duty equipment. I am very encouraged to hear you give glory to God at the end of your video. Blessings!
@Preacher7633
2 жыл бұрын
Thank you, glory to God.
@bmlandmanagementco4981
4 жыл бұрын
Speaking of toughness,...I just started running the G6 blades. Last week I was mowing a biweekly property with my 60” 35hp BigDog Diablo MP. Had to stop because I ran over, and bent a 2’ piece of rebar that someone had thrown out there. Didn’t tear nothing up at all. The strength of these blades is a true testament to how tough they really are. If you saw the blade that hit it, you’d have to convince yourself that it actually hit something like that.
@Pyridox
4 жыл бұрын
Good advice, thanks. I have Gator blades on my push mowers, I like to mulch instead of bagging the grass.
@deplorableb.r.4211
3 жыл бұрын
Thanks for the feedback. I was wondering about the Gator Blades, whether Oregon made a good product and if they were worth the money. You made up my mind. Making the change for next spring.
@saltysteel3996
3 жыл бұрын
I run Reaper high lift blades on my commercial Toro 60 inch zero turn mower. They're 0.250 inch thick (quarter inch thick). Beefy as hell and cut amazing.
@montytyner7982
4 жыл бұрын
Hunted all over for info on mulching blades. Stopped here. No need to go further. Best blade info on the net. Good job.
@barryhunt5357
4 жыл бұрын
I just found you and subbed up , I work for the school system , and am out of work going on the 3rd week , hopefully going back April 14th ?? Great info , and I ordered a set of Gator blades , and I too will be side discharging . Be Blessed from Georgia !!!!!
@E150GT
Ай бұрын
I put one on my push mower. It creates so much turbulence theres a cloud of grass clippings and dirt surrounding my mower as i push it through the lawn. One small mowing and the mower was covered in clippings dirt.
@bobbystewart2605
11 ай бұрын
Gators on a 21 horse 60” mower work wonders. I personally use them on my work mower (has a mulch kit) with our fescue lawns and they seem to cut better than the same mower with the factory mulch blades (blade with the hump in the middle). Idk if it’s bc of the mass of the blade or because of the “high lift” picking up the grass better but I love them. Planning on also trying them with leaf cleanups this year to see what they’re like.
@bobbystewart2605
11 ай бұрын
Also, a guy was using my mower when I had the gators on it and accidentally hit a metal water meter cover and it didn’t break the spindle (oddly enough) but it did chew up the blade edges, unfortunately. Idk Wht they (exmark) make the spindles out of but they r tough to break. I have, personally, only seen one break.
@Preacher7633
11 ай бұрын
They turn leaves into confetti... I run em year round, best blades I've ever used,,imo
@butler386
4 жыл бұрын
Excellent information. Gator blades probably are the best. However to save my machine I would rather bend the blade and replace it than hurt the spindles or crank. Thanks for showing us the difference.
@penguin12902
4 жыл бұрын
I love my gator blades, but I have a nice flat half acre with nothing to hit. Old 18hp MTD 42"
@arlisspropertyservicesllc5943
3 жыл бұрын
I got an 04’ dyt400 with upgraded engine (28hp) and G6’s pull that engine down a touch on startup as well, but it mulch’s like nobody’s business. My yard looks like a golf course every time. But if I get in super tall/wet grass, it will burn the belt off before that engine quits.
@pointnozzleaway
4 жыл бұрын
Good info, I was looking at the Blades. Think I'll be Happy !
@larrycroft470
4 жыл бұрын
What a great video!! Thank you so much for your help.
@askinggrandpa418
4 жыл бұрын
Rogers lawn mower repair people started bringing things in at the first of March .
@clsmallenginerepair3814
4 жыл бұрын
Everybody got the spring bug
@Godly_Man
4 жыл бұрын
Very good. Keep up the good work. Amen.
@garygbur3992
2 жыл бұрын
I have a new JD zero turn Z930R with standard factory installed high lift blades. What blade would you recommend that will provide smaller clippings while still side discharging? I do not have a mulch baffle kit. I'm willing to pay a premium price to get the best blade for my residential yard. Is there a blade in the market that will provide this, but still provide nice looking stripes? Thank you!
@themowerman
4 жыл бұрын
Good information mate. Hope your good
@clsmallenginerepair3814
4 жыл бұрын
Thanx mick, im good.. good and busy, keeps me outta trouble..
@dr.lmsb4456
4 жыл бұрын
Great video . I do aswell love those gator blades . I have a few brand new ones . But i love the thickness of them . I hear ya on a bigger shop , mine is 27w x22d and im finging myself needing more space . Im getting busier as the days go . So i feel ya on that . Thanks for sharing (#smallenginenation)
@clsmallenginerepair3814
4 жыл бұрын
Idk if i could have enough room,, lol
@dr.lmsb4456
4 жыл бұрын
@@clsmallenginerepair3814 yea i know what mean lol
@DabblelyDiddly
3 жыл бұрын
just got one of the g5s for the mtd junk mowers. it has to be better than the blade hd sold me last year...
@clsmallenginerepair3814
3 жыл бұрын
They're good. Its all I use year round. Some say they've had problems when its wet, but I haven't had any issues with em at all.
@rayburnett3066
2 жыл бұрын
I rub a Bad Bos zero turn moser witha42 inch deck. How much are those blades?
@tommyplandscape8624
3 жыл бұрын
Would you recommend the gator on my JD X320 with 48 inch deck engine is 22 hp thanks
@clsmallenginerepair3814
3 жыл бұрын
Yes,, I use them on my push mowers. Anything that has blades. Some say they hav trouble when the lawn is wet an overgrown, but I've not had anymore problems with them, than any other blades when wet an overgrown.
@tommyplandscape8624
3 жыл бұрын
@@clsmallenginerepair3814 thank you I’ll be purchasing a set for the Deere thank you be safe
@hogscattle7877
3 жыл бұрын
I run them on an old JD L130 and it cuts like a pro commercial tractor. I don't even use the mulch plug anymore. I side discharge and the grass blades are small enough to disperse in the ground. It cuts pretty descent in wet grass as long as you're using high throttle and not taking it down too low.
@tommyplandscape8624
3 жыл бұрын
@@hogscattle7877 thanks I’m all in on the Gators great Pro Tip
@robwhiff3411
4 жыл бұрын
Great info 🙂... what do you recommend for my craftsman Briggs and Stratton 22” ?, I am looking to start mulching because and stop bagging also I don’t want to side shot, I tried this week with factory blade and it looks fine so far , I been looking at max power blades regular and mulching blades and gator .. What are your thoughts ? Thanks
@clsmallenginerepair3814
4 жыл бұрын
I run gators year round..theyll mulch an bag
@robwhiff3411
4 жыл бұрын
Ok great sounds good 👌
@Mike_The_Hog_A_Nator
2 жыл бұрын
Just installed 3 Gator blades on my 2yr old ExMark 52" & the engine bogs down & dies when I engage the PTO. Could be the battery. It needs to be jumped off to start it & when I remove the jumper? The engine dies, without the PTO engaged
@Preacher7633
2 жыл бұрын
Bad battery or stator,, not good to jump em alot,
@kdr1048
4 жыл бұрын
Would these work on a 72 inch zero turn with a mulching kit? Or is it better to discharge?
@Okie-Tom
4 жыл бұрын
I have a Grasshopper mower with a 61 inch deck. I side discharge all spring and summer and then put my bagger on to mulch and haul the leaves in the fall. Will these Gator blades work for the side discharge and the vacuum bagger? Thank you Sir. Tom
@clsmallenginerepair3814
4 жыл бұрын
Yes,, i use em year round, grinds leaves to confetti ..
@Bill-xc8le
2 жыл бұрын
The biggest thing I found running these blades is it takes more horsepower to turn them.
@jwayne7038
4 жыл бұрын
Would it do good on a riding craftsman to cut down small stumps 1 inch lower to the ground.
@MarkRambo1
4 жыл бұрын
That sounds like a good way to damage blades and the mower. It’s a lawn mower designed to cut blades of grass, not a stump grinder
@rayburnett3066
Жыл бұрын
Hhow about a 42 inch Badboy zero turn mowers?
@Preacher7633
Жыл бұрын
They work really good in the fall,, some guys run em only in the fall. But works good for tall fescue year round
@2015gtbass
4 жыл бұрын
I just got the cub cadet xt1 50 for my yard. Are these blades good or do you recommend any other.
@clsmallenginerepair3814
4 жыл бұрын
I personally think they are the best you can buy. I use them year round. I havnt put them on my standon yet due to just not having the time to do so.
@marcusworld87
3 жыл бұрын
Will they work with time master mower since it belt driven
@clsmallenginerepair3814
3 жыл бұрын
Yes,, i run them in mime.
@louisgarden3888
4 жыл бұрын
Hey C&L just out of curiosity have you seen the Kavli blades Something 2Look at has done a review on them. Those blades you are talking about don't compare sorry to say.
@clsmallenginerepair3814
4 жыл бұрын
Are u talking about the brush blades? I think those are designed to cut brush?
@louisgarden3888
4 жыл бұрын
@@clsmallenginerepair3814 They are also a finishing blade have you seen the review? I use them all the time with any length grass and they are a much superior blade for mulching than anything on the market. Why in the world would you spend thousands of dollars on a ride on when you only have to spend a couple of hundred on blades and get a better finish . Not only that you save the most important thing time!!!
@chrinamint
2 жыл бұрын
Gosh, for me the lip sync is so far off! Just thought I'd mention it - I don't know if it's happening for others.
@chrinamint
2 жыл бұрын
Note...it fixes later in the video. Hmmmm.
@SteveK99Sub
4 жыл бұрын
Thanks for the video. Can you run G5 mulch blades on a side discharge mower? Will I be loosing the value of the blades if I'm not using a mulch kit?
@clsmallenginerepair3814
4 жыл бұрын
I run them on all my mowers,, year round.
@rayburnett3253
3 жыл бұрын
Do anybody make a gator blade for a bad boy zero turn mower?? It's a 42 inch mower deck under it
@clsmallenginerepair3814
3 жыл бұрын
They make them for about everything.. They make the 5-6 star an round bore blades... Look up length, and bore. Oregon makes em
@georgerosales8738
3 жыл бұрын
What size is your shop?
@clsmallenginerepair3814
3 жыл бұрын
12x20.. and its not big enough.. Might be good for a hobbyist, good to start with. It I've out grown it for sure..
@tommymann69
2 жыл бұрын
Gator blades are not good for overgrown grass up to anywhere from 3 ft tall to 5 ft tall I use them on a 32-in walk behind Scag and the Gator blades hold the grass up under the more a little too long when the grass comes out comes out in big long clumps and it doesn't fan out like it should
@Preacher7633
2 жыл бұрын
3 to 5 feet? Idk a blade that will cut grass that high and not clump,, please share.
Пікірлер: 67