I have the Truxedo Lo Pro on my truck. It is very similar. One thing to note is that the seal on the back is supposed to lay flat on your tailgate. That is why it's kind of in the way of the release handle. You have to close the tailgate first, then latch the cover. Otherwise that seal is going to get deformed and chewed up.
@jamesavakian4977
2 ай бұрын
I ended up buying a Truxedo X15 It works great I can haul tall items when rolled up. I can fill the bed and close the cover and when it rains cats and dogs only a tablespoon of water gets in
@terryhook5518
10 ай бұрын
Ordered mine luckily it was on sale again thanks for the install video u made it simple enough
@zachattackcustoms
10 ай бұрын
Feel free to reach out when you get it in, and let me know if have any questions on the install. Also, let me know how you like it, I think it is a great cover, and you can’t beat it at that sale price.
@terryhook5518
10 ай бұрын
@@zachattackcustoms thanks
@JamesOakes-o7l
5 күн бұрын
Thanks dude. You made that so easy! Appreciate it!
@zachattackcustoms
5 күн бұрын
No problem! Glad to help. Hope you like it.
@bnaskynflute420
4 ай бұрын
Dude thank you for this video. They shipped mine without hardware or instructions and since I didn’t know that you had to do that extra wrap of the canvas at the end before you install I thought they shipped me a defective one. I took it apart and put it back together “right side up” realized it still didn’t work and then found your video. Needless to say this took me an extra hour but I got it done because of your “pay attention” note about the install at the top of the bed.
@zachattackcustoms
4 ай бұрын
No problem, glad to help. Thanks for watching!
@koalafan1576
Жыл бұрын
I have my SRX being shipped now. I can’t wait to install it; however, when I save up I’ll get my dream cover. The RETRAX POWERTRAXPRO XR TONNEAU COVER which also gives me the option of a Leitner bed rack.
@zachattackcustoms
Жыл бұрын
It’s definitely hard to beat it for the price. I actually just took mine off. My buddy wants to try it out on his truck, so I’m going to let him try it out for a bit.
@terryhook5518
10 ай бұрын
Thanks for install video I’ll order for Christmas lol
@zachattackcustoms
10 ай бұрын
No problem, yea luckily it’s on sale right now.
@soonersdevil
22 күн бұрын
Nice smooth presentation...not the crazy introduction that others have...you enough point out likes/unlikes...
@zachattackcustoms
21 күн бұрын
Thanks for watching! Glad to help out!
@soonersdevil
15 күн бұрын
Put on same cover...had This running while installing..like i said previously...NO EXTRA LONG unnecessary talk..which is refreshing...When you flipped cover That was a great help 👍
@Seyotho5
6 ай бұрын
Thank you so much for this video! I ordered my cover and watched this so by time I was ready to install it was a breeze! Plus I had this to reference while doing it. I had different brackets but other than that this was very helpful.
@zachattackcustoms
6 ай бұрын
Thanks for watching, glad to help!
@sceneitallwithjeffandjon6984
7 ай бұрын
Thanks for the awesome video, l was able to follow along to install the same exact cover on our Maverick.
@zachattackcustoms
7 ай бұрын
Glad it helped! Thanks for watching!
@aaronw6706
8 ай бұрын
Thanks for the video, ours just arrived.
@zachattackcustoms
8 ай бұрын
Nice, let me know how you like it, I thought it was a great cover.
@aaronw6706
8 ай бұрын
@@zachattackcustoms Got it in tonight. Spent about 45 minutes doing it. Instructions in your video were great. Didn’t need the paper instructions after watching. Cover seems like great quality especially for the price. I purchased from Real Truck Stores EBay store and offered them $20 less than their website and they accept. Cover came in two days in good condition. It’s very sleek. Bought it based on your video and glad I did. Thanks again!
@zachattackcustoms
8 ай бұрын
Awesome awesome! That’s why I started this channel, to help people find the products that suit their needs. Glad the video helped and big thanks to your viewership!
@njfuentesrespecter81
3 ай бұрын
Thanks for the video. I need a budget friendly solution after my trifold flew off at some point I was driving to work during the hurricane. That was $700 down the drain. Now I just need something inexpensive to cover my bed
@zachattackcustoms
3 ай бұрын
Dang, sorry to hear that, yea this one should do the trick.
@bigtmane8
5 ай бұрын
Much appreciated!
@holyride1
4 ай бұрын
Great video man thanks!
@zachattackcustoms
4 ай бұрын
Thank for watching!
@jamesavakian4977
6 ай бұрын
I would keep my fishing poles in the house. Of course someone could cut a window screen and take them. Maybe an iron safe or sleep with them
@zachattackcustoms
6 ай бұрын
lol, I usually keep them inside, but when fishing early with a buddy I like to have everything loaded up and ready to go.
@StepRey21oh
Ай бұрын
Got mine and your video helped. Thanks. However I cannot unclip mine. Pulling the latch and not releasing.
@zachattackcustoms
Ай бұрын
Thanks for watching, may just need to be adjusted slightly.
@StepRey21oh
Ай бұрын
@@zachattackcustoms got it. Thanks again
@jordanhannah5839
Жыл бұрын
Great video man!
@zachattackcustoms
Жыл бұрын
Thanks
@acetone21
10 ай бұрын
Is it good in the snow?
@zachattackcustoms
10 ай бұрын
I can let you know if it snows this year.
@yvesraynaud5021
Жыл бұрын
Which cover do you prefer/recommend,Extang or Gator?
@zachattackcustoms
Жыл бұрын
If I had to buy one today, I would buy the gator i got sent out for testing. I have my old one on because I spent a lot of money on it and feel obligated to use it. I thought about trying to sell it, cause when I have to use the full bed it is heavy to take off. The gator roll up cover is just soooo convenient.
@SystemVoided
Жыл бұрын
I’m considering this cover. Does it seal well at the front of the bed right behind the cab of the truck?
@zachattackcustoms
Жыл бұрын
Yes, there is a rubber weather stripping that lays flush for a good seal.
@roblacerra3257
8 ай бұрын
I drive a lot of highway, does it flap in the wind or anything?
@zachattackcustoms
8 ай бұрын
Just a little, but it’s not bad. I show how it does in the video.
@nemobubu
Жыл бұрын
Can you latch the cover while the tailgate is closed? I couldn’t. I can only latch it while the gate is open just like you did in the video. Thanks!
@zachattackcustoms
Жыл бұрын
I honestly haven’t even tried to do that, but I could see where it might be difficult.
@kempthypimp1776
Жыл бұрын
Just installed mine today. Push the far driver side corner down pretty hard and it will close with the tailgate shut.
@nymrhyde
8 ай бұрын
Mine won’t close with the tailgate up either
@betweenworlds620
7 ай бұрын
The company says to close the tailgate first then latch the cover. I think maybe your tension is too much. I started on tension 4 as they recommend and it’s working well (installed yesterday on Ford Maverick).
@betweenworlds620
7 ай бұрын
At 4:56 you have the small foam piece above the tailgate. My instructions said to close the tailgate before installing the side rails, making sure there is a good smashing of the foam against the tailgate.
@kempthypimp1776
4 ай бұрын
The cover doesn’t fully cover the Velcro on one side of the truck for me. Do you know the fix for this ?
@zachattackcustoms
4 ай бұрын
It being a new cover it is going to be very tight to pull. Over time it should stretch more.
@vernonstripling4242
4 ай бұрын
is it compatible with the 2024 Toyota Tundra with deck rail system already installed on the truck?
@zachattackcustoms
4 ай бұрын
I have no idea.
@RingBilledSeagull
Жыл бұрын
I feel like most criminals are lazy and won’t use a knife to cut through that vinyl! It looks great. Mine comes Saturday
@zachattackcustoms
Жыл бұрын
Nice! Yea, honestly it’s just piece of mind but I agree with you, it’s a very small chance. Just the other day I had to pick up shoe mould in the back of the truck and the cover worked great. I unlatched the back and laid the cover over top where there was just a small gap for the shoe mould to come up through. It sat pretty still even though it was unlatched.
@koalafan1576
Жыл бұрын
@@zachattackcustomsI should get mine on Wednesday.
@josephpuchel6497
Жыл бұрын
Hey I’ve looked at numerous covers. I like the Velcro sides but think they should have aluminum roller panels like the BAK 4S . Best of both worlds and would be better with the aluminum cross panels for extra protection. Then add a flat Matt fabric cover material.
@TheFazvideo
7 ай бұрын
How is it on car wash tunnels?
@zachattackcustoms
7 ай бұрын
kzitem.infoKW6D1hXvHNY?si=omRVXRoVugbv1AAj
@fbswampfox
Жыл бұрын
Comes with free cardboard snake trap, too!
@koalafan1576
Жыл бұрын
😂🤪🤣
@terryhook5518
10 ай бұрын
What was those circles things for that was in box
@zachattackcustoms
10 ай бұрын
Not sure what you are referring to honestly.
@terryhook5518
10 ай бұрын
@@zachattackcustoms I think it’s the washers there black
@terryhook5518
10 ай бұрын
Do a bed cover giveaway I need one lol
@zachattackcustoms
10 ай бұрын
lol, I wish I could, I ask all companies about giveaways cause I love to give back, but I have a nice bundle giveaway going to start in a few days.
@terryhook5518
10 ай бұрын
Have a question do u have a instagram or email where I can send u picture of the cover one side of it hangs over the bed than the other side dk what I did wrong
@zachattackcustoms
10 ай бұрын
Yes I have an instagram. instagram.com/zachatakcustoms?igshid=MzMyNGUyNmU2YQ%3D%3D&
@zachattackcustoms
10 ай бұрын
Did you make sure each side was the same distance from the tailgate?
@terryhook5518
10 ай бұрын
@@zachattackcustoms sent u message on instagram
@betweenworlds620
7 ай бұрын
I installed mine with the cover rolled and it was 2” offset. Called Real Truck, was transferred to Truxedo which makes Gator. They said bolt it down with the big plastic washers, then go to the short side of the roll and pull it towards you (it slides on that metal bracket). It worked. (I pulled the roll standing outside the truck.)
Пікірлер: 74