I cant thank you enough for this.. was having fits with the gazelle.. you improved my life big time :)
@nazradu
3 күн бұрын
Nice! Hope you can enjoy it more now.
@stevencronin9434
2 ай бұрын
Thanks. An easy and effective way that helped a lot.
@alexjtovarc1
Ай бұрын
great thanks
@mynsonanderson2726
2 ай бұрын
Awesome...
@PreceptorGrant
7 ай бұрын
Fly the takeoff on the torque meter. That makes total sense.
@MartianV2GG
5 ай бұрын
How do you enable the UI For the trim i can't fugue out how to make it show up and what settings to change trim i looked for 1+ hour today on how and i am lost
@nazradu
5 ай бұрын
Out of my head Right Ctrl + Enter
@robadzso
7 ай бұрын
Nice. It's a very similar trim setting as in the Hind as I remember. How do you find the Gaz. there's still this general distrust towards the module ... Which prevented me from buying it even under the last sale ... 🎉🎉🎉
@nazradu
7 ай бұрын
In terms of flight model it's a totaly different story compared to a year ago. It's no longer a drone on rails and very satisfying to fly. They even moddeled traverse flow effect witch most DCS helos do not. But it has to be said, that it runs a bit in the special interest department. There is little use for the scout role in DCS. But it is very cool to sneak behind enemy lines and take out that SAM with your Hot-3 missiles.
@robadzso
7 ай бұрын
@@nazradu thanks a bunch, I'll get it over the next sale then 😃
@nazradu
7 ай бұрын
@@robadzso I'd say use the free trial program now and check wether you like it or not. Christmas is around the corner and so is the next sale ;)
@doifeellucky
7 ай бұрын
It’s Blue Thunder. I like the engine whine. I can actually hover it better from the external view.
@nazradu
7 ай бұрын
@@doifeellucky Almost. Blue Thunder was an SA341. Fun fact, McGuyver was flown with BT in the first McGuyver episode XD
@Dyslexic_Chef
6 ай бұрын
Do you have a video about the auto hover hold? Before the flt model update I could get it set but now I can seem to get it to hold.
@nazradu
6 ай бұрын
Hi, the feature is work in progress and does not work that well. As of now just trim the helicopter into a hover state.
@ianboys1000
5 ай бұрын
It was updated unannounced in the last patch - still not "finished" but almost there and works well, esp in ground effect hover @@nazradu
@Baltic_Dude
5 ай бұрын
IRL you need two people to fly it so just wait for Petrovich-type AI or get a friend to help you
@nazradu
5 ай бұрын
Btw I have a video about it now
@1128lrc
3 ай бұрын
How do you set the trim. I have been using the torque. Is it setting- trim off on, trimmer, trimmer reset. I have the panel showing control. But not sure what command is needed to lock the trim. Also using a twist stick. I don't think that is a good idea at all too!
@nazradu
3 ай бұрын
With the force trim button. Twist stick might not be ideal, but a matter of practice maybe.
@1128lrc
2 ай бұрын
@@nazradu Thank you. I have learned alot from you!
@serhatyuksel8167
7 ай бұрын
I think I saw a gazelle player carrying and deploying manpad guys around in 4YA PVP server. Any idea how or even thats possible?
@nazradu
7 ай бұрын
With a script called CTLD. You can pick up troops or logistic stuff via F10 menue under coms
@serhatyuksel8167
7 ай бұрын
Oh nice thanks@@nazradu
@thebiggestoneyouveverhad
7 ай бұрын
Best thing about flying the Gazelle in DCS is that if you smash it, you can reset...
@serhatyuksel8167
7 ай бұрын
Wait you cant reset normally?
@marcquintin7855
3 ай бұрын
Great video, well explained. One problem I have, my trimmer does not work, what am I missing
@nazradu
3 ай бұрын
If you do cold start I'd say the magnetic brake switch. First switch above your engine RPM gauge
@marcquintin7855
3 ай бұрын
@@nazradu Thanks for the reply, it did not work, I also noticed that my trim is not working except for trim nose up
@nazradu
3 ай бұрын
Strange. Even on hot starts? And the button itself is working and bound to the correct command. No modifier? Maybe repair DCS or try it with a fresh layout.
@marcquintin7855
3 ай бұрын
@@nazradu Yep!! Even on hot start, in the control command menu, the only command that gets highlighted when I press on my hat switch is the nose up command. Still very flyable, just wished the trim would work, easier to make fine adjustment. Thanks for taking the time
@nazradu
3 ай бұрын
@@marcquintin7855 Oh you got it wrong! This thing has a hat switch trimmer that works like in airplane PLUS the regular force trim wich is another button!
@Gunfreak19
4 ай бұрын
I try this, no mater how careful I am, as soon as it starts to tilt right, it goes right, even if I correct with cyclic left, or if I pull really hard left, then it just tilts right
@nazradu
4 ай бұрын
Sure your curves are alright?
@Gunfreak19
4 ай бұрын
@nazradu I have no curves. I used FFB stick. With about 5 cm extender. What curves do recommend?
@nazradu
4 ай бұрын
@@Gunfreak19 I think with the FM update I did not set any. Just 100 % linear all axis. Maybe a repair of DCS to make sure everything is as it should be🙈
@Gunfreak19
4 ай бұрын
@nazradu I think it's just throwing me off how extremely sensitive it is vs Huey or Apache. In the gazelle you have to fly it like you're air to air refueling a F16. Tiny tiny movement.
@nazradu
4 ай бұрын
@@Gunfreak19 It's just the take off. It might help to do it quicker at first.
@KOLUCHIY25
7 ай бұрын
Hello ! I feel comfortable with this helicopter, but sometimes I have moments, especially after exiting a sharp turn, when it begins to uncontrollably sway left and right and all attempts to calm it end in disaster. Maybe you have any thoughts about this and have you ever had such moments?
@nazradu
7 ай бұрын
Well at least I have very rare moments where I can't catch it and its realy hard to tell without seeing it. My guess would be that ether roll angle is too high or you are pulling to many G's and making the turn too tight. Can you tell me the speed, torque percentige and if left or right hand turn?
@KOLUCHIY25
7 ай бұрын
@@nazraduI’ll try to catch this moment today and then I’ll be able to tell you for sure
@nezuminezuminezumi7266
7 ай бұрын
@@KOLUCHIY25 I suspect it's most likely that you're entering a low speed under transition (under 15kts IAS) and having the fenestron stall out. It can be quite abrupt and if you have any kind of cross wind inducing weathercocking effects it could be very hard to control.
@KOLUCHIY25
7 ай бұрын
@@nazradu I sorted out the roll imbalance. In my settings I had trim with return to center, I did the flight trim and everything returned to normal. Thank you for participating.
@KOLUCHIY25
7 ай бұрын
@@nezuminezuminezumi7266 No, this is a little different and I have already found a solution by adjusting the trimmers. Thank you for your participation, your information is also important to me.
Пікірлер: 54