Noted: 6:20 Always watch for trolls when flying above Danish farm fields.
@serviciosgeomensura4421
3 жыл бұрын
good video especially the link for the USGS Agisoft workflow, is there any possibility to include subtitles in Latin Spanish ?, thanks! 😉😎👌
@Emlid
3 жыл бұрын
Hi! Thank you for the kind words :) Yes, we’re planning to add Spanish subtitles to this video, we’ll inform you once it will be updated.
@scottsweet3690
3 жыл бұрын
You made a point that the base had to be set up in your local reference system to avoid systematic errors. I have not found anywhere in the base mode for RS2 where you can change the reference system. Where do I do this?
@Emlid
3 жыл бұрын
Hi Scott! You need to choose the required coordinate system in the Survey tab of the ReachView 3 app before the survey mission. The app will give you a hint on what coordinate system your base should be in. Then you can just enter these geographical coordinates of the base directly to the corresponding section, as described in our docs.
@mauricetanquary2431
2 жыл бұрын
@@Emlid Can you create or calibrate for local coordinate systems, such as if a specific worksite has chose to create their own coordinate system?
@Sreejumohan73
2 жыл бұрын
What is the accuracy in rtk drone mapping in 1km distance
@christianferrazgruner
Жыл бұрын
If you mean the distance from the Base station to the drone, you are probably looking at 1-1.5 cm error from shot to shot.
@davidbryan6484
2 жыл бұрын
what is the name of the forum they keep mentioning?
@Emlid
2 жыл бұрын
Hi David! Perhaps, you mean our community forum: community.emlid.com 🙂
@liamgbstreet
3 жыл бұрын
What software was used for the post-processing ( 49:50 )
@Emlid
3 жыл бұрын
Hi Liam, it's Agisoft Metashape :)
@masterbaitfishing4947
3 жыл бұрын
You do know that the more ground control points you add that it will eventually cause issue. 10 max
@christianferrazgruner
Жыл бұрын
Not according to the comprehensive study mentioned. 10 max sounds like more like poorly designed software, that would get confused with the rigidity introduced by many very accurate control points.
Пікірлер: 14