Wonderful explanation, Dean! Your videos have always been great to watch. Thanks for doing it.
@RDeanOdell
2 жыл бұрын
Thanks watching, and leaving a comment! I have more videos coming soon.
@pauldiaz4273
2 жыл бұрын
Love your videos R. Dean! I have a passion for metrology!
@RDeanOdell
2 жыл бұрын
Great to hear! Thanks for watching.
@nickramirez2936
2 жыл бұрын
Thanks for these videos. Very educational!
@RDeanOdell
2 жыл бұрын
Thanks so much! I’m glad you find it helpful.
@aravinthkumar6649
2 жыл бұрын
Dear sir most welcome 👍 this kind of vedio Sir 👏
@RDeanOdell
2 жыл бұрын
Thanks for watching! I appreciate you taking the time to leave a nice comment.
@danabriscoe2300
2 жыл бұрын
Thanks for making the videos Dean and sharing your vast knowledge.
@RDeanOdell
2 жыл бұрын
Thank you for watching! Stay tuned for more and better content coming soon.
@deeb8282
2 жыл бұрын
How do you measure profile...example I have a drawing with a surface profile datum ACB with a basic dimension..the basic dimension being a 128.00 angle..do I need to calculate do to the basic dimension??
@ariel59864470
Жыл бұрын
Every video is perfect 👍
@KAGE_13
Жыл бұрын
Hey Dean, great video as always. Quick question, If you’re inspecting the profile the same way as a flatness callout (Example: .004” profile drawing callout) is the profile tolerance treated like .002 max or do you get the whole .004 tolerance? Or does that only apply when a profile is calling out to a datum feature?
@RDeanOdell
Жыл бұрын
Hi, great question! If it’s profile with no datum reference, the tolerance zone is free to move around within the limits of size. If there is a datum reference with a basic dimension, you would have .002” on either side of the .004” profile you mentioned.
@KAGE_13
Жыл бұрын
@@RDeanOdell Thank you for the clarification! Appreciate you passing on the knowledge. Learned a lot from your videos throughout my career.
@rahuldumu8456
2 жыл бұрын
great information
@RDeanOdell
2 жыл бұрын
Thanks so much!
@ViolinCineMusic
2 жыл бұрын
Excellent
@RDeanOdell
2 жыл бұрын
Thanks so much!
@thiruramesh4181
2 жыл бұрын
Sir..... please explain about all the options in CMM...I am eagerly waiting for your videos...to learn about CMM moreee and moree.....
@thiruramesh4181
2 жыл бұрын
I did not understand tha base allignment... because it varies component to component....so please explain briefly about CMM base allignment sir
Пікірлер: 21