Hello everyone!
Today I would like to show you about software GE Fanuc "Proficy Machine Edition V9.0" create new project with hardware configuration so let start with me:
1.Open software Proficy Machine Edition
2.Create empty project
3.Add target
4.Rename target "you can use any name that you want"
5.Hardware configuration before download
6.For hardware now I used Power supply model:IC695PSA140
CPU model:IC695CPU310
Ethernet module:IC695ETM001
7.So let configure software to be the same hardware...
8.Setting CPU memory
9.Configure Ethernet module for link with computer to download or upload program
- Set IP address
- ping to test between computer and PLC
- Put manual IP adress of computer
- Go to target name "CHORK"
- Let try again
10.The IP adress of PLC have set so we can ping to IP:192.168.0.10 then Enter
11.That good now we can online and download hardware configuration from computer to PLC.
12.Before download hardware configuration we must switch stop CPU first.
13.Now we have download successfully so we can switch CPU to run mode
That all for how to create the sample project and download the hardware configuration of PLC brand GE Rx3i.
Thanks you so much for watching my video.
On the next video I will show you about how to create sample program for test.
Have good day.
Bye bye.........
Негізгі бет GE-Fanuc Proficy Machine edition 9.0 create and download new project
No video
Пікірлер: 26