Check out the upcoming RTX 3060 ITX: reviewer.co/gpu/pny-geforce-rtx-3060-12-gb-xlr8-gaming-revel
@rossdelport
3 жыл бұрын
Wow what a great build, I was originally going to go with the k39 case but needed an extra 2cm to fit in a 3060ti. Then this pops up on my home screen. Going to be my next build for sure. Gaming performance must be great with that card
@L91
3 жыл бұрын
It's good value case, and yeah you can fit the EVGA RTX 3060 TI XC in this case, just waiting for it to launch in most places publicly
@kyleirelandtech
Жыл бұрын
I saw this like a year ago or so but didn't realise until now it was you! My 5600G APU build is in this but I've ordered an A09 ITX Case from AliExpress that'll let me down size it further. All metal is a plus over the acrylic pieces in the GEEEK Case.
@L91
Жыл бұрын
OMG this build takes me back some. I loved the RX 5600XT ITX as was little beast of card and wish I'd kept it as GPU crash happened not long after. I'm going external liquid cooling in the Densium 4 v2 for my next ultra compact build.
@elteacher0223
Ай бұрын
nice build!! love it!!!
@leonardopereda2721
3 жыл бұрын
Justo lo que estaba buscando para convencerme por este mini gabinete ..
@L91
3 жыл бұрын
Gracias. De nada.
@MrApihhh
3 жыл бұрын
Hi. Do you think thia case is suitable to put on backpack?
@L91
3 жыл бұрын
Yes, likely to get scratched up tho.
@notme6254
Жыл бұрын
hi, this build is so awesome and clean af! glad i found this, cause i got some questions regarding the A30 V2. after scrolling through all comments here my one question is solved already, which is EVGA 3060Ti XC would fit in this. and for the next question, i plan to use R7 5800X3D or even R9 59xx (only if possible) for my system, and after doing some research, the CPU Cooler went down to 2 choices, Alpenfohn Black Ridge or Thermalright AXP-90R, and ill also get a few of Noctua fans too. actually kinda worried about this, do you think with my CPU Cooler choices and this small case would be able to handle R7 or even the R9? or do you have any other suggestions that might do for me? thanks!
@marcinkuna1252
Жыл бұрын
Do you happen to remember what are dimensions of extrusions? 15x15 or 10x10?
@Oblique0
10 ай бұрын
What is that heatsink
@oaknputhong
2 жыл бұрын
Hi, do you think Pico PSU is an alternative?
@L91
2 жыл бұрын
No 👎
@harryl9948
Жыл бұрын
arent the motherboard stand offs in wrong place
@francislloydduay7514
3 жыл бұрын
just make another video the update build of this with rtx 3060 ti. i want to see it. and also can you make another video of velka 7 with rtx 3060ti? please.
@L91
3 жыл бұрын
Still trying to get a new GPU for the moment. The one I'm really after isn't available just yet but should be soon. Hopefully I can snag one or an alternative 💰may just have to wait my turn from EVGA directly
@raul1899
3 жыл бұрын
Dude what type of fans did you use on top of the case? What brand? I just bought this case, waiting for it... What worries me about it is the with of the actual fans, I'm not sure if they should be slim factor.
@L91
3 жыл бұрын
NF-A9x14 fans. This case supports 2 at the top.
@raul1899
3 жыл бұрын
@@L91 Thank you so much for the reply. I will use Cryorig C7... I've seen a lot of builds and always see it comes with fans inside the box, are those included? Or did you buy them separately with Geek? But wait... 120x25? I thought this case only supports 92mm fans... I'm talking about the fans with the actual case, the top fans for the case...
@L91
3 жыл бұрын
My bad, wrong case. It's supports 2x 90x15mm. Thank you for correcting me
@raul1899
3 жыл бұрын
Yeah I already built mine with Noctua NF-A9x14 HS-PWN
@bzbee5139
2 жыл бұрын
Would it be possible to install a single fan liquid cooler?
@L91
2 жыл бұрын
No sorry 😐
@quocphingo9807
2 жыл бұрын
can i put zotac 2060 super mini in this case ? thank you
@L91
2 жыл бұрын
Yes
@mrhappy8966
3 жыл бұрын
i have the evga 3060 ti xc and im thinking on doing this what do u think i will actually need for a power supply? im running a 5600x
@L91
3 жыл бұрын
You should be fine with 500W, as the GPU draws around 200W which leaves around 300W for the rest of the System.
@mrhappy8966
3 жыл бұрын
@@L91 ok thank you for getting back to me much appreciated
@mrhappy8966
3 жыл бұрын
@@L91 here in the us i all the 500 watts are sold out.....
@L91
3 жыл бұрын
@@mrhappy8966 Anything 350W and up might do the trick. Since your living in the US, might be able to get hold of Cheap Enhance Flex ATX power supplies easier
@mrhappy8966
3 жыл бұрын
@@L91 i can get a 400 right now but idk i a little worried...
@mandrakeroutes2179
3 жыл бұрын
How are acoustics with flex PSUs like the FX500? Does it get loud?
@L91
3 жыл бұрын
It certainly does, should be a separate video on my channel showcase the SilverStone FX500
@prateekprakash1941
2 жыл бұрын
What length of riser cable do you recommend?
@L91
2 жыл бұрын
Minimum:180mm (ideal length) - Max: 200mm (this should work also)
@harryl9948
Жыл бұрын
i dont get how to install the motherboard stand off panel? or wehat the silver things do
@L91
Жыл бұрын
Here's link to the installation guide: www.geeekstore.com/wp-content/uploads/A30-V2-Installation-Guide-V2.0-English-1105.pdf
@harryl9948
Жыл бұрын
@@L91 I know but it isn’t very clear. The silver nut things just show them like placed on the side of the frame. Doesn’t show what you fix them to or how I’m so confused
@harryl9948
Жыл бұрын
@@L91 where the silver nuts are put on the frame there isn’t any screw holes or anything
@L91
Жыл бұрын
@@harryl9948 maybe this will help: kzitem.info/news/bejne/poaXypevnKd_pZw
@harryl9948
Жыл бұрын
@@L91 that shows nothing accept it already built. What did you do with them little silver nuts?
@faisalmuan
3 жыл бұрын
btw this case can fit gtx 1660 super from zotac ?
@L91
3 жыл бұрын
I'm aware 🙂 although they cost similar to the 5600XT but no where near as good
@faisalmuan
3 жыл бұрын
@@L91 yeah you right, but i am worried if i buy rx 5600 xt like from xfx it's not fit in this case
@L91
3 жыл бұрын
@@faisalmuan I would only recommend the POWERCOLOR RX ITX in this case or RTX 2060 / 2070 SUPER from Zotac
@jasonjenezon1232
3 жыл бұрын
I have a zotac 1070ti mini in this same case
@L91
3 жыл бұрын
Real Nice. I'm a big fan of the SFF GPU's from Zotac.
@samm928
7 ай бұрын
Hell no way .. This chassis is made out of cheap plastic ?? .. Geek wants $140 for a bunch of 3d printed acrylic and a hand full of nuts a screw? No fucking way
@raul1899
3 жыл бұрын
Show the finished case man... What the hell XD. Dislike.
@L91
3 жыл бұрын
🤣
@CRPACHA
3 жыл бұрын
Hola, tengo A30 v2, ¿cual GPU 3060 TI se puede utilizar en este case?
@L91
3 жыл бұрын
EVGA RTX 3060 Ti XC
@CRPACHA
3 жыл бұрын
@@L91 con fuente de 400 watts?
@L91
3 жыл бұрын
Sí, creo que sí, pero solo puedo confirmar al 100% 500W.
Пікірлер: 68