Found these videos a few days. I also lost my mother and restoring my boat has been my healing process. Thank you.
@Rampage00769
4 жыл бұрын
I know this is an old vid, but My condolences. Lost mine about two years after this. I built a car to take my mind off it a little. Unfortunately dad went a year later, and step mother a little less than a year later after. We all do what we have to, but we never forget that loss. Great work, learning a lot and putting it to use on my Rot boat I thought was a deal. Thanks for the time spent.
@rwm1000
7 жыл бұрын
That's so awesome seeing you and your Dad working together!
@jasenpride77
10 жыл бұрын
I am new in boating and have seen lots of your work here that helped me alot in doing repairs on my 95 Maxum 2100sr.Thank you.
@mortenberg2897
6 жыл бұрын
Very sorry about your mother. I think this series of videos is great. Hope your family comes out well in time, and keep up the good work 👍
@richardthomas1566
6 жыл бұрын
Man way to tackle a tuff project ! Got a Lemmon and you put your head down and made lemonade excellent save ! I’m more impressed with your character and solving a problem then the massive project . Great Video and project
@byrdsdoityourselfgarage7330
4 жыл бұрын
Sorry for your loss. It's good that you're spending time with your dad. :) take advantage of every minute.
@mr99ninja
3 жыл бұрын
I’m sorry for your loss. Great videos
@upallnight888
13 жыл бұрын
Glad to see you're back. Best collection of memories that I have with my dad was working on projects, whether it was rebuilding the porch to their house or pulling the engines to my collection of Lotus cars..
@vwfoolwhy
13 жыл бұрын
Great Job! By far the best restoration work I have ever seen. So close to being done. Can't wait to see what kind of a challenge you take on next. Mike
@andersjakobsen9906
7 жыл бұрын
You had a difficulc 2011...Nice to see the nice boat refitt. And you and your Dad working together. Greeting from Norway
@AltonRowell-gb1lb
5 жыл бұрын
One hell of a great job on the boat. Nice work.
@gordymrgordy850
6 жыл бұрын
We are very sorry to hear of your Mother's passing. We would like to pass along our deepest condolences to you and your family . Our thoughts and prayers are with you. I'm very sorry to hear of your loss.
@carlosnvegas2426
5 жыл бұрын
Sorry to hear of your Moms passing. Somehow this boat is going to help your family find peace both in the driveway and out on the water!
@lesliecarter2460
4 жыл бұрын
Condolences to your family your videos are great keep them coming thanks
@vr4junkie385
5 жыл бұрын
Great work man really shows what boats are about I bought a similar boat with the same condition truly a PITA
@gfd635
5 жыл бұрын
I was sooo sorry to hear about your mom. My condolences to your dad.
@jackpinnell3204
8 жыл бұрын
I'm sorry to hear about your mom.....my condolences.
@lightrose100
5 жыл бұрын
She is watching you every day , so relax
@TitanFallDeath666420
5 жыл бұрын
Sorry to Hear about your Mom been watching since your first vid and looking forward to the finished boat and sad you had to rebuild it after just buying it! But lesson learned and time to get er done! GG on great restoration!
@leighdeakin3414
7 жыл бұрын
Well done neat work now you can say you now your boat . I had a fletcher gto needed lots of work took 2 years of restrictions I feel your pain
@sevenz1471
5 жыл бұрын
champion effort mate, really helped me out .....thank you.
@Muisak
8 жыл бұрын
much love to you man. I just lost my mom. Actually getting into boating to help myself get past it.
@robertjohnson4784
6 жыл бұрын
I know your videos is six seven years old but my heart still goes out to you about your mom RIP I hope you still have the boat and everything is well I lost my mom 3 years ago and God bless you
@tysonjensen2175
6 жыл бұрын
Boat builder here: If that is 2 part paint (epoxy based), usually with an isocyanate driven solvent, please wear a full suit and professional ventilated mask and paint in a ventilated booth OR outside. You do NOT want to have that paint on your skin, or be breathing it AT ALL. If you can smell the paint, you are being exposed to it. An organic filtration mask (non ventilated like the one you guys are wearing) is not sufficient protection for those types of paint. If you are using a one part paint, it is generally less toxic, but you still need skin protection and a good sealing (non ventilated) mask, and be painting outside. I like your DIY attitude and determination. WAY TO GO! Please be safe!
@btube2006
6 жыл бұрын
Sorry to hear about your loss. I know that pain.
@literbikedoc
10 жыл бұрын
Love the vids - keep them coming Frisco :) Roller it is for my project !
@Banjo-lm2wl
5 жыл бұрын
So sorry to hear about your dear mother.May God give you heaoling.
@Thegaragefiles
13 жыл бұрын
looks great so far, one step at a time, it is alot of work but before you know it you will be putting it in the water.
@starwarsfanforlife
6 жыл бұрын
Sorry for your loss.
@Jeff_n_Texas
6 жыл бұрын
Watching all these segments, was sure sorry to hear that you lost your mom. Hope you're doing well.
@paulgains4516
8 жыл бұрын
Sorry to hear about your mum mate, my condolences.
@FriscoBoatersGarage
12 жыл бұрын
@tasmania105 I have to work on this outside, and the wind was always a problem. An HVLP gun still has over spray, and it would have gone everywhere. The roller worked fine. The other issue we were having is short working times. It was kicking at 5 to 10 minutes.
@jonasnilssen8829
8 жыл бұрын
Sorry to hear about your mom. Keep the work up❤️
@nastyboii30
5 жыл бұрын
My condolences to you & family God Bless you
@thekodiak1547
7 жыл бұрын
Our condolences, keep on educating...
@kkbodyshop
6 жыл бұрын
Enjoyed your videos. Sorry to hear about your mother.
@SgtRollo61
13 жыл бұрын
It's better that new!! The factory never built that boat so good!!
@FriscoBoatersGarage
11 жыл бұрын
Oh heck yeah!!! A new boat like this is around 60K with a big block and features. I have WAAAAAAAY less in it... and no payment.
@FriscoBoatersGarage
11 жыл бұрын
If you use a foam roller it goes down nice. The cheap nap rollers fell apart. If I could have had a garage to spray in, I would have done so, but the overspray is HUGE!
@peterthomas1670
4 жыл бұрын
If you can smell the styrene when gel coating, change the organic filters in your mask, they have a limited life time an as soon as you open the packet they start working.
@danvarga8264
6 жыл бұрын
completely surprised you didn't buy a Ez-up canopy to cover the boat for shade, work, fume dissipation, and keep a breeze rollin' through...
@liemh9290
9 жыл бұрын
That's it gelcoat for me too : ]
@FriscoBoatersGarage
12 жыл бұрын
@cuban571 I hope so, your boat has it all over the outside.
@FriscoBoatersGarage
12 жыл бұрын
You will be fine. Just sand the wax off. I used short nap roller and just rolled away, and there is no reason to wait 24 hours. The stuff cures in about an hour, and you can put another coat down right then.
@stevewetzel8441
2 жыл бұрын
You videos are great. I have a question for you. I’m gonna redo my boat this year. No serious problems, just want to get rid of the carpet, fix a few areas and put down a non skid. After I glass the plywood do you think it would be better to gel coat or use Awl Grip or Kiwi Grip? Or maybe gel coat then put a non skid on top. My original plan was just to put down the Fiberglas and use Kiwi grip right over that. I’m rethinking it a little. What do you think?
@cuban571
12 жыл бұрын
if i was to paint the motor compartment in my boat . what are the things i would need
@FriscoBoatersGarage
12 жыл бұрын
@conroyz28 I know most of them, and they knew it was not permanent. It is at the storage place now.
@toobglued
6 жыл бұрын
Even 10% it flashes fast in those temps. Surprise you’re using such a small roller. If you do it again your best bet is to have batches all measured out and ready to catalyze and use cardboard to lay everything out as a work space and have several pairs of gloves and full size rollers and ready to rock ‘n’ roll. If you keep one pair of gloves on at all times, you can replace the second glove quickly because the sweat will not make it stick on your hand. I find using a large chip brush works the best and for anything but totally flat hard surface is a 7 inch roller works but usually it’s just one more thing to get in the way of the project and I just poured out of the cup on to the boat and spread around
@Rick-tb4so
6 жыл бұрын
Is there advantage to using gelcoat vs base coat/clear coat ??
@tromboneJTS
11 жыл бұрын
Enjoying this series. Is the gelcoat self-levelling? How particular does one have to be in prepping surface imperfections in the fiberglass? Also, what camera are you filming with? Thanks!
@GrowersLuv
5 жыл бұрын
Growers Luv bro
@billyjenkins8261
11 жыл бұрын
You need another one I have a 1994 searay 200 series that needs interior work motor runs great . I will take 2,500 for it and I will throw in everything I have to finish the boat . I am in meridian, mississippi
@user-sb4lx9mz6z
4 жыл бұрын
Шикарно!!!
@ka1dza
12 жыл бұрын
Sorry to hear about your Mom. Mine died 10 days before yours. I'm trying to restore the fiberglass camper top of my '78 VW Westfalia Bus. Is it possible to lay gel coat over the existing finish after sanding. Also how do you make the finish flat? Thanks for the info. Bob Pratt, Abington, MA
@marioguerrero3607
10 жыл бұрын
How long did it take you from start to finish and what was price on all the supplies because I have a ALL American Larson and I want to do the same thing to mine
@Ratkwad
11 жыл бұрын
Hey j just wondering if you used waxed gelcoat for the lot or just the top coat?
@FriscoBoatersGarage
13 жыл бұрын
@vwfoolwhy I think I might tackle four wheelers this winter.
@julianacromie6141
4 жыл бұрын
Did you scuff up / sand the first layer of gelcoat before applying the second layer? Or were you able to apply it straight on?
@cuban571
12 жыл бұрын
what purpose does gelcoat serve, and can u just aplly it on top of fiberglass.
@carlosg1165
11 жыл бұрын
jay how much did you had to spend fixing this boat .? was it cheaper than buying a new one with the total cost boat plus restoration ?
@chuckberg8828
5 жыл бұрын
How many pounds do you think you have added to this boat from stock ?
@victorrobinson7008
5 жыл бұрын
Sorry too hear but love never ends !
@cuban571
12 жыл бұрын
is gel coat salt water resistant
@FriscoBoatersGarage
13 жыл бұрын
@LaDolceVita54 I used it as 3/4% and only got about 15 minutes.
@markjennings2315
5 жыл бұрын
My OCD was saying "missed a bit" on that 2nd coat LOL
@tasmania105
12 жыл бұрын
How come you didn't use your HVLP gun or a cup gun to shoot the gelcoat, instead of rolling it on?
@alexrodriguez2343
5 жыл бұрын
what paintings do you use and where can I buy it?
@timknight9676
6 жыл бұрын
Hey love the videos I have watched several now and I thought it is Ironic that I have almost the exact same boat in the 20ft version with simiular problems. I have some qustions how can i contact you?
@shainefenwick8603
7 жыл бұрын
so could i roll on gelcoat on the bottom of my seadoo and then sand it? i know to go from more agressive paper and step down to less aggressive then compound then polish but would it be ok to roll the gelcoat on the bottom
@thekodiak1547
7 жыл бұрын
Shaine Fenwick Did you solve your issue? I'm also looking to redo the bottom. I just don't know if I'm going with paint or gel...
@FriscoBoatersGarage
11 жыл бұрын
I use US-composites. It just works better.
@russg.9348
6 жыл бұрын
Sorry for your loss. She raised a very good man.
@nastyboii30
5 жыл бұрын
In 5 days someone will see your mom in they dreams if they do took her some flowers
@FriscoBoatersGarage
11 жыл бұрын
Us- Composites. Much easier to work with.
@vitalhoma2553
4 жыл бұрын
Can’t you just spray the jell ?
@jrx2662
6 жыл бұрын
sad for your lose!
@conroyz28
12 жыл бұрын
Does your Homeowners Assc. not give you hell about the boat in the driveway. I live in Frisco and mine are complete a-holes.lol
@Rick-tb4so
6 жыл бұрын
Is gelcoat better for the inside or flat coat clear coat ??
@FriscoBoatersGarage
6 жыл бұрын
Rick S gel
@FriscoBoatersGarage
13 жыл бұрын
@big9286al Almost 3 gallons
@AntonioPerez-kk8cj
5 жыл бұрын
Hey Jay, what's the brand of the gel coat you used? I'm planning on ripping the carpet out of my boat and going gel coat.
@FriscoBoatersGarage
5 жыл бұрын
I really dont remeber. I have used a few different brands
@AntonioPerez-kk8cj
5 жыл бұрын
@@FriscoBoatersGarage Thanks for the reply. By the way, I watched the whole Sea Ray overhaul series. You did a great job on that boat, and a lot of really good information and pointers. Thanks.
@shawnp8429
6 жыл бұрын
Gel coat gos straight over plywood ?
@FriscoBoatersGarage
6 жыл бұрын
After you coat it with glass and resin
@ranger2056
8 жыл бұрын
I don't know you but sorry for your lost
@kelvinyoxall9088
2 жыл бұрын
can i use your boat name, a little different though?
@barrynoel6908
6 жыл бұрын
can you spray the gel coat?
@FriscoBoatersGarage
6 жыл бұрын
Yes. You need a special spray tip.
@Rick-tb4so
6 жыл бұрын
Wouldn't it be easier to spray it on ??
@FriscoBoatersGarage
6 жыл бұрын
Rick S either way. I wanted to have some texture for your feet. If I sprayed the coat it would have been slick.
@joeycalhoun5944
11 жыл бұрын
give me so advie on my boat l have to do the whole groud
@ThatsMyBass614
12 жыл бұрын
Have you thought about Rhino lining it?
@bucsanders7861
7 жыл бұрын
You'll probably have more hours into repairing that boat than the owner will put on it in 10 years.? .. LOL!!
@kathymurawski2246
5 жыл бұрын
Sorry. About your. Mom. Ray. Michigan. 🌷🌷🌷🌷
@patrickfcheneyjr9848
5 жыл бұрын
Wrong respirator filters, Rust use inorganic respirator filters. You wont even smell the fumes.
@ellnegro
6 жыл бұрын
Rip
@TommyZTrains
6 жыл бұрын
18 pinheads thumbing this down ? "why" ???
@BravoX1D
4 жыл бұрын
He doesn't explain anything about gel coat or the process. Leaves a lot of info out of other videos as well.
@FriscoBoatersGarage
12 жыл бұрын
Not recommended.
@AltonRowell-gb1lb
5 жыл бұрын
When u get true fixing the boat , all will be left is killing the guy who sold u it. Sorry about your mom.
Пікірлер: 102