Andy is the best instructor on boat maintenance and repair.
@TheCommo81
3 ай бұрын
I've faithfully adopted BoatworksToday. I've searched videos on boat repairs and I love this channel. He doesn't brag about certifications he has and explains everything in fine detail. I'm restoring a 1987 Four Winns Freedom 160, previous owner let it sit uncovered for 2 years, we cleaned it up 5 years ago and 2 weeks ago I found the floor "sagging" so I removed it and found rotted stringers, etc. Currently replacing them. With the cost of some of this stuff I wanted professional advice. I've never fiberglassed before so I watch a video then tried it then came back to the channel to see what I did wrong! Been working on the boat 3 days and am getting good at the repairs and fiberglass work thanks to these videos. I subscribed to make it easier to watch. Thank you for the great videos.
@johnfleming5678
3 жыл бұрын
Everytime I have a question in my head regarding boat refinishing he is always the most well informed knowledgeable guy.every detail is covered.
@ClihtYeastwood
3 жыл бұрын
Whoever thumbs downs any boat works video needs an MRI. These videos are so beneficial if you want to do some of your own boat work/maintenance. Thorough information but not detailed to the point that it potentially discourages/disinterests. Great job as always Andy.
@rx7dude2006
6 жыл бұрын
Dark colors heat up more in the sun and thus fade quicker so usually needs a more aggressive compound.Ive been detailing yachts for almost 17 years now.Great video by the way!
@tobuslieven
5 жыл бұрын
It's really amazing how well that buffer worked on the faded blue sections. It goes from looking crummy to looking brand new. I bet the owners were happy.
@markpirone2429
2 жыл бұрын
Appreciate your down to earth solutions. Seems like everyone on the internet goes through an elaborate process where you just offer solutions that get it done.
@timconrad63
3 жыл бұрын
great advice i have been working with fiberglass for 25 years ( a Ticked tradesman)you have given The BEST explanation i have seen Well done I hope people that venture into Heavy buffing compound realize that water or even liquid detail wax is Very important ,other wise you Will Burn the fiberglass it's great to see someone that really knows fiberglass giving Good Advice.
@tannerb4143
4 жыл бұрын
good video. my recommendation is to always test a SMALL area when using compound. use a lower speed and dont apply pressure to the buffer. If the gelcoat isn't too bad, use a one step polish or wax.
@MusicWorld-zy6dl
5 жыл бұрын
Thanks so much, you are a great instructor and presenter. I feel more confident about DIY now. I like many others take our hats off to you!
@robkennis5993
3 жыл бұрын
Thank you for the video and information.I just used the Aqua Buff 1000 and 2000 on my heavily oxidized boat. Results were better than expected, very pleased!
@JohnSmith-cd7cr
3 жыл бұрын
Been following your shop for the last 5 years your awesome my dude
@Parkerized1
4 жыл бұрын
High-speed sanders, grinders and polishers can put out an eye faster than running with sharp sticks. Safety glasses are a must. Great vid.
@starwarsfanforlife
8 жыл бұрын
I have used a DA polisher on our 2011 Tahoe boat to maintain the gelcoat with a foam pad. If you are not used to using a high speed buffer with a wool pad you can easily burn the gelcoat. There is no way you will burn the gelcoat with a DA polisher especially if you are new to polishing. When I use the foam pads 5 pea sized drops on the pad are enough to do a 2x2 section. I am not a professional detailer just an enthusiast of doing my own buffing and polishing which I learned from junkman2000 on KZitem. I would have liked to see the completed result of this boat but I could see that it was coming along nicely.
@davethewelder1
4 жыл бұрын
One of the best Videos on taking care of gel coat and paint I've seen. To many attack it with sandpaper then there videos get lost. Why would I want to use sand paper on paint or gelcoat. I like your process much better. Sometime this year hope to conduct this process on my speedboat. Thanks.
@IOMFishing
5 жыл бұрын
You've given me the confidence to have a crack at this on our faded red warrior 150. Thanks.
@michaeltees6670
5 жыл бұрын
The best boat repair videos on the web. Thanks
@olmok
8 жыл бұрын
Thanks for all the hard work you put into your videos - always informative and entertaining. Keep up the great work, I hope to be able to be one of your patreons one day!
@jackneff179
6 жыл бұрын
Olle Görling what about replacing the gelcoat?
@jackneff179
6 жыл бұрын
what about replacing the gelcoat?
@JJ-333
7 жыл бұрын
I have to say you have some of the best instructional videos out there. I am headed outside to start on my 1989 stratos. I have a question for you. A friend said I should try to wet sand using windex spray. Have you ever heard of this? I wet sanded yesterday and it did leave a very white haze on everything that did wipe up quickly. The rough gritty feeling is gone. Anyway, thanks for the videos, I am a retired disabled veteran that started watching your videos for knowledge, and you sir are excellent at teaching, thank you again. You helped me re floor my boat, and now restore my gel coat.
@boatworkstoday
7 жыл бұрын
Using a spray bottle with water and a tsp of dish soap (I use dawn, but any will work) is the best way to go. Have not heard of using a window cleaner. The soap adds a little lube and helps to keep the sandpaper from loading up.. Hope this helps! Thank you and good luck with your projects!!
@stevebarrios5904
5 жыл бұрын
Just found your channel about a week ago and subscribed right away. It doesn't take a genius to recognize a master at work and you sir are a master. I'm about to embark on my first boat makeover. Thanks for the videos, they're very informative.
@MidniteClubII
4 жыл бұрын
Nicely explained and broken down. Im a newbie Boat Owner of a nice Old SKIPJACK that needs some TLC. Thanks From Huntington Beach!...
@amosholloway
3 жыл бұрын
Very very nice job on the video! Thank you sir for taking the time to help everyone.
@chrismccartney8668
4 жыл бұрын
Great clear video which explain grit buffer and speeds to use..... Many others are not clear this one is....
@darf8475
5 жыл бұрын
I’ve watched loads of these videos and this is just about the best I’ve seen. Thank you 👍
@miketomas8564
4 жыл бұрын
I will agree with this statement! I purchased my first coach almost two years ago, and I'm trying to keep my head above water with all these How-to videos. But NONE of them explained what Gel Coat is or how it differs from other automobile paint. Thank you for taking the time to explain these usually overlooked tips in your video. I would not have found it if it wasn't suggested by KZitem.
@dmcd7333
4 жыл бұрын
Best video explaining how to bring the gelcoat back to life!
@nocoolname32
5 жыл бұрын
after watching video after video after video on buffing, this was far and away the most informative!!
@mrequi1
5 жыл бұрын
Great video. World class yet down to earth. Why you don't have a show on PBS I don't know.
@hugomiranda5424
5 жыл бұрын
mrequi1 agreed
@WreckDiver99
8 жыл бұрын
Another great video. Our poor Welcraft was very neglected. I did my best to clean it up, but I think I may have done damage to her as well. It seems that nobody really wants to tell people how to do it themselves...instead they always say "oh, I can do that...for $x". UGH. Thanks Andy!
@hughvr1573
Жыл бұрын
Thanks! I feel much more confident approaching this now.
@daveroberts936
4 жыл бұрын
It's a real talent to be able to pass on your knowledge so that others can understand it. It is insufficient that you understand yourself if you do not have the ability to impart that knowledge to other people!
@Mimer6
2 жыл бұрын
Thank you. I will use that knowledge for my motorhome in Sweden.
@edjcambridge
6 жыл бұрын
Easily the best video on this topic! ...and I have looked at several... finally the info I needed to work on my boat! Thank you!
@JamesLenane
8 жыл бұрын
We built boats for over 30 years..speedboats at first then R.I.B's for a long time so done too much compounding lol,repairs mostly as we had first class molds so when you pull a hull it was perfect,I always found the key to great compounding is water and a very good eye for color match on repairs as gel coat will fade,red is always a problem with age!Good channel great tips for peoples boats,so many dont look after them and want to blame somebody else for it,it was always sad to see a boat youd built that was perfect in every way come in 3 years later destroyed.Great channel and well done!
@boatworkstoday
8 жыл бұрын
+James Lenane Thank you James!
@JamesLenane
8 жыл бұрын
Your welcome,your enjoyable to watch,we always tried to pass on what we had learnt over the years so great to see a channel like this!
@franciscosprott2433
7 жыл бұрын
Great video...I'm starting a boat cleaning and detailing business. Very useful information.
@nwtraveler5266
3 жыл бұрын
Thanks. I will now tackle our Winnebago motor home which has oxidized.
@chrissnyder9091
7 жыл бұрын
I've been watching for a few years and Boatworks today is my final word!
@chrisao1987
4 жыл бұрын
Best video I have come across yet.
@Andomosity
4 жыл бұрын
I think the bottom of the boat stays shinier longer because the sun isn't on it all the time. The uv rays from the sun start to breakdown the gel coat when it loses its shine. I've read that the purpose of shining the gel coat is be because it can reflect the uv rays.
@markhamze154
5 жыл бұрын
A little advice on puffing compound. Never coat the surface with buffing compound. That way the buffing compound rubs on each other and not the surface.I generally put samall spots and then buff.
@renevizoso1872
3 жыл бұрын
he is a great instructor exelent explanetion breaking down everything beutifull
@eddiegiovanniello4346
8 жыл бұрын
Thanks Andy, that was really informative see how I want my 1971 Chris Craft Lancer to be perfect I think I'll go with the awlcraft2000 unless you think I should use something different I could you really use your help because I'm ready to paint the boat is 100% fiberglass ready and faired off, thanks again buddy, love your videos keep them coming for the diu's just to let you know I had a boat guy come here to see how much it would cost to get my boat painted professionally he wanted $8,000 even after it was completely done and fared he asked me, who did the transom on the boat? I said I did, he said you told me you know nothing about boats, I said why do you ask anyway? he said that's the nicest job he's ever seen done on a transom, I told them KZitem, Andy taught me, thanks to you I did the job perfect thanks buddy for all your help if it wasn't for you I wouldn't have gone so far on this boat with confidence
@boatworkstoday
8 жыл бұрын
That's awesome! Will you be spraying or rolling the paint?
@dancraggs422
3 жыл бұрын
watching from western Australia mate.
@gregellis5435
6 жыл бұрын
Very Helpful - Best I have seen - This will help me clean up the RV - Thanks so much
@royawatchmenonthewall3091
6 жыл бұрын
Thank you as someone just getting into boats I thank you for your good tottering God bless, thank you
@flagpolechristmastreeguy
5 жыл бұрын
I would’ve liked to seen you do a pass on the light blue but excellent video to say the least!
@PapaSmurf918Detail
4 жыл бұрын
Thank you.. this was very helpful as I'm looking to polish my friends boat. First time on a boat I normally do automotive paint correction. Thinking I can handle it! Appreciate you my friend!
@davidneilson3508
5 жыл бұрын
Maybe because the dark gelcoat absorbs a lot more uv rays 😊👍👍
@jasonharris1672
8 жыл бұрын
speaking of pint stripes got tips on redoing them... and thanks for all the quality knowledge
@705techno
8 жыл бұрын
+Jason Harris You can usually just go over the old one with the new one, if its the same width. Only time its noticeable really is if you are covering an area that is chewed up; if thats the case clean up the "chewed up" part and then just go over it. Or you can get a ten dollar pinstripe eraser tool that goes on a drill. Watch you don't overheat the gel though it can yellow up pretty fugly like.
@hungle55901
7 жыл бұрын
Thank you. I love your great instructions. You are a good instructor.
@canyonhaverfield2201
8 жыл бұрын
very well put.. so great to have instructions given clearly . Your suggestions I feel I can trust .. good film job too ! Best to you ! I'd think it wise to suggest about lighting and temp. during application.. and regarding working outdoors,concerning amount of sun,moisture etc...
@hkka72
8 жыл бұрын
Great guy! Thanks a lot. These videos are big help to us. Regards from Finland!
@damianpeace7400
8 жыл бұрын
Great video full of good information. Im off to pull the boat out now and get it looking like new again. Cheers!
@boatworkstoday
8 жыл бұрын
+Damian Peace Have a safe season!
@SteveTraversInD
4 жыл бұрын
Its time to get the boat ready for fun on the lake
@joemamo1
4 жыл бұрын
Thanks a lot. Your recommendations work well and very practical
@vicariousvalley6407
4 жыл бұрын
Thanks for the great info! Really looking forward to doing this to my boat soon.
@SL1CK1307
3 жыл бұрын
Thanx for the specifics! Very detailed and educational
@BruceschultzAU
4 жыл бұрын
Nice one mate Pretty much my style but I like my toolex red Foam cutting pad first Infact I run 4 or 5 of their different colours lately don't use my sheepskin much anymore. Cheers Bruce.
@robby5329
8 жыл бұрын
i really love the help you give me on anything boats....thank you
@nathanmayo7101
3 жыл бұрын
Might I recommend some safety glasses anytime you are using powered rotary polishers. Compound splattered into your eyes is never a good thing. That said, nice information and I'm looking forwards to buffing out my SeaDoo Speedster soon.
@SailingMoneypenny
8 жыл бұрын
Excellent Chanel. Very informative and well explained. Very thorough. Thank you, this was a very good and detailed video.
@MichaelandStar
7 жыл бұрын
Outstanding video. Well thought out content, great presentation, and very informative. Thank you!
@lyfandeth
6 жыл бұрын
25 years ago that Big Coatings Company told me that even with their best two part coating (paint) that once you have painted you will always have to repaint every ten years. But gelcoat, if regularly waxed to protect it, would easily last 20-30 years. Gelcoat being harder to apply though. Sounds like "paint" has gotten much better now? And that regular waxing still protects best, for either one.
@tajma70
5 жыл бұрын
I bought a '95 20' Nitro bass boat that was peeling on the top part of it. I had to sand all of that off down to the paint which looked good when wet. I'm not sure what that stuff was that peeled off but if that's something I might have to do again, I might as well polish the paint.It actually looked better than the coat that was actually sticking. After pulling some of those pieces off, I noticed hairline cracks. Maybe a cover up?
@raysaw
8 жыл бұрын
What a great Video! Keep them coming. This sure helps with my old fiberglass boats.
@askemarina3542
7 жыл бұрын
Hi Andy, Just wanted to say that your video gave me the confidence to start buffing my 03' Sea Ray. This was my first time with a rotary buffing machine, but I am thrilled with the results so far. I went light and used the Meguiars #49 at 1500 rpms with a wool pad. Huge thanks for your video. Also, if you get this in time, what would you recommend for a long lasting wax or sealant after you buff?
@mobiledetail4you
5 жыл бұрын
Aske Marina Meguiars Flagship premium
@buyamerican3191
7 жыл бұрын
First let me say i enjoy your channel immensely. This was the first video of yours that I ever watched and I subscribed right after. After watching every one I find myself facing a repair that doesn't match any of your videos so I thought I would just come right out and ask. I have a 1968 Chris craft Commander that has a puncture hole right at the turn of the keel toward the front of the boat. It was "repaired" by the previous owner using bondo which even I know was not the correct product. This repair leaks so I must get it repaired properly. The damage is aprox. the size of a baseball and the hull thickness exceeds 2 inches. I'm sure there are many factors that will determine the proper repair procedure so I will appreciate any guidance you can provide. My first question is polyester or epoxy? Thank you in advance Craig
@boatworkstoday
7 жыл бұрын
Hi Craig! Poly would certainly be fine (most likely it's wha the hull was make with) but for repairs below the waterline I tend to use vinylester resin and save the epoxy for fairing :-)
@brittanyeaton5105
7 жыл бұрын
Craig Wilson
@porkchop659
8 жыл бұрын
Great video Andy, thanks for the tips! Just in time as I am getting ready to restore the finish on my Sea Ray. Also, you have to love all the "fuzzy bunny fur" of a new pad!
@boatworkstoday
8 жыл бұрын
+PorkChop659 At one point during the edit I had the initial spraying of fuzz in slow motion; thought it would look cool. It ended up looking weird so I changed it :-/ New pads always make a mess!!!
@porkchop659
8 жыл бұрын
+BoatworksToday Haha yes they do. I was polishing an aluminum wheel with a flat buffing wheel. After about a minute or so I looked down and I had "strings" everywhere. Later my wife asked what was all the black fuzzy stuff all over her white car, yep I have to clean it next...
@richie2dicks468
4 жыл бұрын
What about compounding non skid? Is that thing? My non skid is a pain to clean and stains literally over night
@lesterdiamond6190
5 жыл бұрын
I'm gonna give my Lavro Drifter some love after watching this.
@MrFlyingFSX
8 жыл бұрын
Great video, I have this issue to solve in my boat, and you helped me a lot! thank you!!
@MrGuitarguyadam
7 жыл бұрын
This video really helps with the restoration of my 78 Daycruiser 21' Jet boat. I thought i was going to have to paint it, but it looks like I will just be investing in a good variable speed buffer. My only question is... I want to do the bottom of my Hull. How do I safely get it up off of the trailer to do so?
@adamflight1
8 жыл бұрын
excellent video. I am about to start this on my boat. great vid.
@mattdelarede9673
3 жыл бұрын
Great content and delivery.
@jackbloznowski5429
5 жыл бұрын
I would recommend using a dust mask during the buffing.
@tukaopaleye8582
3 жыл бұрын
Thanks very much, this is very helpful. After your recommended treatments here, at what point would you go onto wax the gel coat or would you recommend some other procedure ? I'm thinking on the light to medium scenario.
@Abi21mac
8 жыл бұрын
Can you wash the buffing pads. And what you use to do it so. Thanks for all the knowledge that you share it been so helpful you got no idea.
@louiskile2645
2 жыл бұрын
Thank you very much that was helpful
@lew9215
8 жыл бұрын
Another great Video Andy. Very well explained.
@argtv1007
3 жыл бұрын
what do you think of 3m buffing compound used in auto body shops?
@reelcs
3 жыл бұрын
Thank you for the tips & techniques and for showing what products work good, helps the DIY. Question- is this same process for painted surfaces? Thanks.
@certblaster44
7 жыл бұрын
Another great, thoughtfull, and hugely informative video by BoatworksToday. Thanks for doing these! I have a question: How much Aqua Buff 1000 should to cover the topsides of a 30' sailboat (Capri 30). If you had a formula for that, it would be awsome.
@lesdunn736
4 жыл бұрын
Still useful Still well presented Thank you
@davidlane6758
4 жыл бұрын
Wonderfully informative video as usual. I'm wondering though, what is the best way to maintain gelcoat non-skid?
@bjnr0
4 жыл бұрын
Great, informative well demonstrated. Instant subscriber 🍀👍😊
@hudson8865
Жыл бұрын
Thank you very much.
@rogermowery3048
4 жыл бұрын
Great video, Thanks. lol loved the thumbs up in the reflection!
@vonkanon3091
4 жыл бұрын
Remove things like the rub rail, windshield if necessary and any other pieces that would cause compound build up.
@jasoncordier4267
2 жыл бұрын
Very useful! Well explained!
@Local_Boydidgood
5 жыл бұрын
Nobody pays us to make videos, I do it to help people buff boats. When do you guys find the time? Nice coverage.
@Supanova70
4 жыл бұрын
I personally like the 3M gel coat step 1,2,3
@Terry-Kleetus-Kleeblatt
3 жыл бұрын
Hi Andy, Thanks for an excellent video. I just purchased a 1986 Ranger Bass Boat with severe oxidation. Because the boat has a poly-flake finish I was wondering if your buffing method is the same for my boat? The finish is very rough. Thank you, Kleetus
@ralph9987
4 жыл бұрын
I did sub. I was confused as to the correct speed. You said the #49 was a much lower speed than the 1000 compound which was 1100rpm. But both were 1100rpm. Can you pls help clarify this? Tia
@MrGarcon98
8 жыл бұрын
i am getting tips for a dune buggy berrien , dragon red gel coat . thanks nice vid , thank you for sharing your knowledge.
@705techno
8 жыл бұрын
Great video. Agreed 100% on the products as well. Megs ox remover and cleaner wax are great products. I was an aqua buff fan for years for the heavy stuff but found the 1000 fast cut just got too course and you have to really work to get the defects out. Ive been liking the Mirka Polar Shine line the last year. Has the cut of the 1000 but finishes down like the Meguiars. Doesn't load up pads either like the AB does. Will also clean up 800 grit flawlessly. Only thing I disagree with is the cheap buffer part. I started out doing this with jobber buffers and the minute I bought a Makita I never went back. Makita, Dewalt, Porter, all great tools and most are under $200 now. Also love the Bayliner Blue......2455 was my first boat. Keep up the good work man!
@boatworkstoday
8 жыл бұрын
+705techno I've looked at the Mirka line but never used them yet. Which compound are you talking about that is similar to AB? Looks like they have a few to choose from :-)
@705techno
8 жыл бұрын
+BoatworksToday Polarshine 25. It says it takes out 800 grit scratches and it actually does. I see they have one even courser now (35) im going to give that a whirl this summer as well. I use this as a compound and then use the megs (45?) boat rv polish on dark sections (makes it pop) or on white just skip to the cleaner/wax as a protectant. Only complaint I have about it; it breaks down from the pad into a dust so you get dust everywhere on the boat. Having said that it is totally water soluble and wipes off with ease. I had a couple Megs drips fly on me that stained the vinyl (my boat thankfully) Have you found any waxes that you like besides the cleaner wax? Im trying to find something that protects dark surfaces a little better. So much misinformation out there its ridiculous. Have found the cleaner wax to be a little more watered down the last couple seasons; perhaps I just got old stock though. Really hope thats the case though I really like it; im just finding its not lasting all season like it used to on dark surfaces.
@aguyandhiscomputer
7 жыл бұрын
Detailer/Used car dealer here. I find it funny when people pick up our dealership's Milwaukee buffers and are surprised how heavy they are. Real men use heavy buffers :)
@walkertongdee
7 жыл бұрын
Your boat could have vinylester gelcoat, that is used in salt water boats.
@rickbardecki7711
2 жыл бұрын
I love your boatwork videos. I am refinishing a spa. What do you think about using a ceramic coating after polishing?
@jerrywills
3 жыл бұрын
Quick question; Once you go over the surface with the compound, do you then apply a wax or other polish? Is that needed? I need to do this to our RV : ) Thanks for your great videos! You are an exceptional teacher!
@jdisdetermined
3 жыл бұрын
Yes, if you're cutting with heavy compound on a rotary removing heavy oxidation, you're going to leave a mess. You'll need to follow up with at least a medium polish/pad to clean up the heavy cutting. You can then grab a DA polisher a foam pad and a polish if you want the best finish possible. After you finish polishing, you need to use a panel prep/IPA wipe or just wash the RV with a strong soap like Purple Power Boat Wash, or even Dawn dish soap will work, dry completely, and then apply a wax, sealant or coating. Don't skip that step, if you don't remove the remaining polishing oils first, the protection *will not* bond well, and you'll have oxidation again in months. It's a big job, give yourself plenty of time and don't get overwhelmed. Spend the money and get good materials, if you use inferior products, you're handicapping yourself before you even start. I get alot of phone calls and work from people who tried to do it themselves and gave up. Most of them are not using the right materials. It makes all the difference.
@rickbardecki7711
2 жыл бұрын
@@jdisdetermined Keith I am refinishing a heavy oxidized Spa. After compound n Polish I was thinking of using a ceramic wax. What's your thoughts on that?
@K03021817
5 жыл бұрын
I'm the 90,000 subscriber lol. Good Info and videos
@jeffs9530
4 жыл бұрын
Your going to need a bigger bottle. Hey! thanks for posting all the videos its helped me a whole lot. Q: What do you recommend for polishing stainless steal?
@charlesronk2989
3 жыл бұрын
Awesome video. Is a Bass Boat any different. I know they are built gel coat first.
Пікірлер: 275