Here is a follow up video about this focuser: kzitem.info/news/bejne/jmegzZlonZ2IrIY
@jamesbonser9667
Ай бұрын
Thanks for letting us know about this focuser. I will certainly be putting in an order for one to use with the camera lens rig I am setting up. Great find!.
@user-xj8oh6fo2f
Ай бұрын
Obvious copyright infringement. MyFocuserPro2 clone. But who cares.
@hael8680
Ай бұрын
The placement of those connector grub screws is a guaranteed backlash nightmare.
@lupixus
Ай бұрын
The software is replicated from Myfocuser2PRO - they've copied that firmware and modified the name. The motor is a cip 28byj-48 at 5V.
@potrzebiehuck
Ай бұрын
That's a really cheap crappy stepper motor if true. Lot of backlash.
@dyazRO
Ай бұрын
I'm really surprised that this contains the puny 28byj-48. I built a myFocuserPro2 clone for my rig and couldn't get this small motor to move the coarse focusing knob at 5V. It wouldn't do it even after converting it to bi-polar and running it at 12V. And I don't have a huge load, a 294, a manual 5x1.25" filter wheel and the field flattener. It doesn't want to move even if I keep it horizontal, let alone if it's tilted. I had to mount it on the fine adjustment shaft for it to work (sub-optimal, there's a tiny amount of slippage in the fine focusing system, but it only affects the "going home" function.. basically, it ends up 1-2mm short of the starting position.)
@ciskje71
Ай бұрын
3840 steps per revolution is unusual for 28BYJ-48 are you sure that it is?
@lupixus
Ай бұрын
@@ciskje71 the motor has 64:1 reduction. 3840 steps/tev : 64 = 60 steps/rev @ the motor. If you use the motor with a driver in full step mode, you have 32steps/revolution @ the motor (no redcutction). Probably the use the motor drivers in 2x microsteps
@ciskje71
Ай бұрын
@@lupixus 28BYJ-48 motor has 5.625 degrees per step so you are wrong.
@SDNoel73
Ай бұрын
I have this focuser and it's my first ever EAF. Its worked so well for me that I'd be hard pressed to buy anything more expensive in the future.
@AnastasiaNoire
Ай бұрын
Need that focuser 😍
@siegfriednoet
Ай бұрын
Very interesting, certainly for that money. But not available anymore so it seems
@AstroCreation
Ай бұрын
They will have more focusers available
@AstroCreation
Ай бұрын
Update: they got some positions added a few minutes ago
@mrlintonious
Ай бұрын
Yep, they sold out now.12 July 2024, on that link.
@AstroCreation
Ай бұрын
They added a few positions yesterday that were sold out again. I was told they’re planning to add more. Stay tuned if you’re interested!
@dumpydalekobservatory
Ай бұрын
I just thought I'd add another comment I got my Gemini focuser yesterday & I'd ordered mine with the temperature probe but mine arrived without sadly, also it had a dent on the side of the casing to so whether it was the shipping companies that did it or it came from the seller like it who knows. However I did connect it to my laptop to test it & the EAF worked fine so at least that's something. I have contacted the seller about the issues but if I don't hear anything back then I will contact Paypal. Not trying to put anyone off buying one but the one I have isn't as described & damaged.
@AstroCreation
Ай бұрын
Thank you for sharing your experience and sorry it happened to you! If you purchased it from “LittleLight Store” on AliExpress, you should not have any problems with the seller as it’s the original producer of these focusers.
@rickbattle5706
Ай бұрын
How does it adjust for backlash? Nice video, thanks.
@AstroCreation
Ай бұрын
Thanks! I haven't precisely checked backlash on my copy, but there is the way to set backlash compensation if needed.
@lupixus
Ай бұрын
@@rickbattle5706 if you use NINA (for Windows) or Kstars (for linux), you will find that backlash is managed in the apps, not in the driver. Actually it is recommended not to use firmware backlash due to the fact that aquisitiont software can't take into account about it. NiNA has 2 types of backlash compensation methods : absolute and overshoot (the second one is the best) and it works perfectly with any electronic focuser regardless of the brand
@leepolikoff5895
Ай бұрын
@@AstroCreation My backlash is about 70 using NINA
@dumpydalekobservatory
Ай бұрын
I'm still waiting for mine to arrive so I can fit it
@ivangeorgiev4664
Ай бұрын
This was very helpful, thank you!
@raylilliquist3275
Ай бұрын
I have 2 of these focusers and not had any issues with them. They have a nice beep when connecting to them and when they reach end of travel. Can't beat them for the price.
@AstroCreation
Ай бұрын
Glad to hear it! What telescopes do you use them with?
@raylilliquist3275
Ай бұрын
I'm a beginner and I am on the cheap side of astrophotography but use the focusers on both a SVBONY SV48P and SV503 102ED. I get decent results using inexpensive equipment enough to enjoy the hobby on a budget.
@whatmattersmost6725
Ай бұрын
This just maybe a clone of the "Myfocuser 2 PRO" DIY EAF. The fact you should NOT use the TEMP Sensor and the REMOTE at the same time as it may damage the EAF?
@AstroCreation
Ай бұрын
I was also surprised to see this warning message on the box; however, I think it won't be actually damaged. The same question was asked on Facebook, and here is the reply from Gemini: "No, using it at the same time will not damage the eaf, and sometimes it may cause the temperature probe to not be recognized. If you have no problem connecting at the same time, that's OK. At the same time, the new circuit board is being tested, and the new circuit board will reduce this problem."
@kiscsigabee
2 күн бұрын
Hi, FYI the link in the description does not work anymore.
@AstroCreation
2 күн бұрын
I’ll check it out Thanks!
@AstroCreation
2 күн бұрын
Just checked. It leads to the focuser. The problem is that it sold out at the moment :)
@Oxizee
18 күн бұрын
Any problems with customs or any extra VAT which needs to be paid?
@AstroCreation
17 күн бұрын
I didn't have any issues with customs. There is no VAT in the U.S., so I didn't pay anything extra.
@potrzebiehuck
Ай бұрын
Open them up and show us what parts they use.
@AstroCreation
Ай бұрын
Will do👍
@michaels.8598
6 күн бұрын
@@AstroCreation Is a video planned where the focuser is opened.
@ravia.vkumar1080
Ай бұрын
does it work with ASI Air ?
@AstroCreation
Ай бұрын
I am not sure if it works with ASI Air. I don't have one on hand to test out.
@whatmattersmost6725
Ай бұрын
It will NOT be seen with ZWO ASIAir. Only ZWO products will work and be controlled with ZWO ASIAir. Due to ZWO breaking the agreement with Pi.
@AstroCreation
Ай бұрын
@@whatmattersmost6725 if I recall correctly, Ben from @TheNarrowbandChannel made one of his non-ZWO cameras working with ASI Air. I think he mentioned it in one of his videos. Overall, yes, only ZWO products can properly work with ASI Air.
@SpieleETC
Ай бұрын
Considering buying this focusser. But Facebook? Realy? There are a milion better and more up to date forums or similar today..
@AstroCreation
Ай бұрын
Better to begin with something, I guess. On the other hand, I agree, they could spread the word and promote a little better.
@deeboweb
Ай бұрын
just waiting on mine to turn up! thank you for this video, cant find any info on this thing
Пікірлер: 49