The Harbor Freight Gordon Leatherman wave clone is pretty good for $40
@jkukurugya
Ай бұрын
Agreed. I bought 1 and really like it. I plan on getting another for my wife's car too instead of 1 of my Leathermans staying in there.
@thatguy044
Ай бұрын
The best thing, in my opinion, about the recent Gerber multi tools is the sheath. I use the extra straps to put the sheath on my belt horizontally, straddling a belt loop so it won't slide around. Then I put my Leatherman in it!!
@NJD1997
Ай бұрын
the thing i love the most about the suspension nxt is the spring action which the leatherman wave does not have, the leatherman also does not have but the pocket clip but the pocket clip on the suspension is atrocious and doesn't hold onto any pocket i have or any loops. For this reason I always carry my leatherman and my gerber at the same time.
@robertmakowiecki7849
Ай бұрын
Great review. I just ordered a couple of these from Amazon, one to throw in my boat tool box and the other in my ski bag. I have other multitools (SOG, Leatherman) but these I can put in places where it's not a big deal if I lose them.
@timothy146237
Ай бұрын
I personally hated the gerber suspension and nxt... their tolerances and quality were terrible compared to leatherman
@rockogawky5982
Ай бұрын
I bought a Gerber suspension and it’s compares to a Walmart Ozark Trail multi tool.
@bandito_dino
Ай бұрын
@@rockogawky5982the good ozark trail multi tool is quite better than than a leatherman, tbh. It holds a better edge and and is easier to sharpen.
@eriktaylor5704
Ай бұрын
I’ve owned the original Gerber Suspension for nearly 10 years. It’s a great multi-tool for its price and purpose. Camping, fishing, handyman duties, etc. I know how to care for my tools, sharpen blades, and not abuse my stuff. Unless you are prepping for the apocalypse, the suspension will get work done.
@bdcochran01
Ай бұрын
1. great review 2. I am older. When the multitools were not available, the late Ron Hood and I had a disagreement about which SAK to buy at the low end as a "pre Leatherman multitool". He wanted a wood saw. I wanted a scissors. The Huntsman model was the SAK knife that had both features. 3. I have multiple Leatherman Wave tools: in the car, in the dance shoe bag, in a suit case and at home. 4. If I were starting over, I went pick a Chinese leatherman like tool with a scissors as my backups and occasional use tools.
@santijr007
Ай бұрын
I have the Gerber Nxt is amazing
@larryvincent1083
Ай бұрын
I bought the BiBury 31 in 1 multitool, basically a Surge clone. Very pleased with it. If I’d found it sooner, I would never have purchased my Wave+. However, my favorite multitool is my Gerber Dual Force; around our 3 acres and RV it is the most useful and dependable.
@Ernie-on2vf
Ай бұрын
The name is bond Leatherman bond 😜
@danieloleary131
Ай бұрын
I own a GERBER Suspension NXT. It's served me well, but I'm willing to try the Berbury(?)
@wretchedmess
22 күн бұрын
Great video. I've got a Bibury clone and a Workpro clone of the Wave, both of which are pretty good. The Bibury is quite a bit nicer quality, and more like current Wave, with replaceable wire cutter blades. Didn't want to throw a genuine $$$ Leatherman in the toolbag in the truck. Wish someone would clone the Juice and the Squirt.
@ToolTechGeek
Ай бұрын
A small modification can reduce the weight of this tool and bring it close to the Gerber.
@ilwv77m98
Ай бұрын
Thanks for all the hard work you do putting these videos together. I am looking to get a smart watch and haven't decided on one yet. I would love to know what kind of watch you wear and see some reviews on that. Keep up the great work and I love your channel! God bless you and your family.
@gideonstactical
Ай бұрын
Thanks so much for the comment. I went with a Garmin.
@tumblingdown8612
Ай бұрын
Leathermans are about 2x what they should cost
@ExamonLyf
Ай бұрын
Nice (and valuable) review!! Thanks very much!
@MrCabc88
Ай бұрын
I was expecting another bad knock of from China, but in fact looks really good
@Thoringald77
21 күн бұрын
On the topic of clones, I found a clone of the strongarm in D2. Seems to be pretty good, and holds its edges longer
@kathleensmith370
Ай бұрын
i think leatherman is in real trouble- I have a bibury and have had good luck with it. I have a Gerber as well but not this model
@DL-ij7tf
Ай бұрын
Flissa and other brands have knockoffs of the Wave for fairly cheap. Not as high quality as Leatherman but not bad, especially for backups.
@DamionJR4923
Ай бұрын
I don’t like the Flissa. The handles close when you cut things. The blade is decent. I like the Harbor freight version better. The bit holder retention isn’t very good. The pliers close too easy but better than the Flissa. Leatherman is still better and you definitely pay for it.
@dfgerherbduh3102
Ай бұрын
Hey man, your channel is my go to for knife reviews but there’s a couple of tools I’d really love to see you review. The baryonyx machete and the G2 Grandaddy machete. God bless you man.
@Bubbachichi
Ай бұрын
I find the black coated gerber pliers have been phenomenal, ive had a mp600 basic for over 6 years and just got a custom centerdrive plus with the same coating, which i find is just better protection than the silver finish that ive had on a gerber truss. I also find the sliding jaw or out the front pliers from gerber have insane stability compared to butterfly jaws, plus you can flick it with youe wrist and open them one handed. If leatherman has one similar, i might have to test it out
@tomquirin4231
Ай бұрын
brotha i own n use a mossy oak multi-tool here , great n solid backup option + i own 2 others for e.d.c. i rotate time to time + harbor freight just came out with a gordon multi-tool , ie leatherman wave clone for 40 $ , thanks n great vid n keep em coming > tom !
@gideonstactical
Ай бұрын
Right on
@tomquirin4231
Ай бұрын
@@gideonstactical thank you brotha , i hope you are well n kep the great vids coming i will faithfully n forever support you 1 million % , i am a u.s. military/marine vet 93' to 97' active !
@rcjoe406
Ай бұрын
Kool...I paided 17 for the flissa with g10 scales pretty amazing what's going on in our space right now
@gideonstactical
Ай бұрын
Nice that sounds pretty awesome
@John-gu7jq
Ай бұрын
Great review! That's a lot of tool for the price.
@gideonstactical
Ай бұрын
It sure is!
@mrhalfstep
Ай бұрын
The box on my B/Bury says that it's made of 3Cr13. Hope that helps. I bought it on the strength of your review and I'm really surprised at the quality. Thanks for making the content.
@steely_mike
Ай бұрын
Good value for sure
@JohnWic-ld2fd
Ай бұрын
I just got a Rocktol with the fire starter on it I broke a Gerber suspension cutting chainlink fence so I bought a new one and now it’s in a bag lost somewhere around here lol That’s why when I seen you review the Rocktol I had to get one ☝🏼
@patricegarnierlobo25111967
Ай бұрын
i carry and use clones multitools never the originals and it s ok!
@ManInTheWoods76
Ай бұрын
I bought three suspensions for my kids. They are garbage when trying to use the pliers. The grip is way too wide for small hands to grip. If you have banana hands, fine. But normal hands or smaller hands, they suck!!
@gideonstactical
Ай бұрын
It is a wide grip, I didn’t think of that.
@AlexHand
Ай бұрын
How about a comparison to Harbor Freight's $40 Gordon copy of the Wave?
@freddiedorris3788
Ай бұрын
Great review Arron ,, but as for myself I’ll stick with all my USA made Leathermans 👍👍
@tecnotrog1
Ай бұрын
The B bury wave clone and Gordon wave clone are really well made. i own both and hope you get a chance to review them if you have not already. 🦉
@PMCKnivesAndTools
Ай бұрын
*Their, not there
@mugsofmirth8101
Ай бұрын
Things this cheap aren't built to last.
@gregblake2764
Ай бұрын
I get where you're going with these Leatherman/Gerber clones. My Leatherman Surge is built like a tank and nearly as heavy. But not everyone can afford it or need something that massive. These inexpensive multi-tools definitely meet a need for lighter duty, affordable tools that can handle a lot of tasks without carrying a toolbox everywhere you go. The Rocktol 12 in 1 you reviewed a while back is a great example. Surprisingly, I use my small $25 Leatherman Micra more for incidental stuff than the larger multi-tools. The drivers work for the small tasks and the scissors are better than what comes on the bigger tools. I just don't need a pair of pliers all that often and when I do I go out to the SUV and get my Surge. No way I'm lugging it around in my pocket.
@jonathancupp3686
Ай бұрын
Hey Aron, I have much respect for you bro, but I will never again buy a Gerber product and I haven’t in over twenty years. I bought a few Gerber products many years ago and none of them lasted more than a few months, including three multitools. Their quality is sub par to the extreme. My Leathermans just keep on going. It’s far less expensive to just buy the Leatherman in the long run and you don’t have to worry about failures.
@gideonstactical
Ай бұрын
Totally somebody has the money they should buy me a lot of them as I can. This is just a super budget friendly option for those who don’t have $100 or want one or two back ups to their Leatherman. 👍😉 always appreciate the comments and feedback Jonathan.
@eyeofthetiger4184
Ай бұрын
G'day Aaron, goes to show how much mark up there often is on mass produced products and for the sake of a coupla tweaks, a shipload more sales, outweighs the cost of the extra effort to start with. Incidentally, a mate of mine picked up a ripper cheapie in the specials bin at one of our outdoor chains for 5, yes 5, I'll say it again 5 AUD, (around 3 USD). Unfortunately unbranded and unpackaged, no model, serial number, to be found, not even a "made in" from memory, (fair bet, alphabet steel from NW of Taiwan, the blade reminded me of 8Cr, which aint too bad), ultimately, I couldn't tell ya what it was. And nor could the sales staff, I went back for one a coupla days later, but alas all gone, (I reckon word had got out), and no clue from behind the counter, ...... not that they'd admit anyway ; ) As far as multitools go, it was one of the better designs, build and ergos I've ever seen with about half the tools liner locking and no play anywhere, ...... at least as new ; ) Main point is; yes there's plenty of rubbish to ferret through, ............ but dont ignore the specials bin !!! Cheers Duke.
@stevanoutdoor
Ай бұрын
I think in this case better than the original. My reason for a 'knock off' or 'look alike' is overseas backpacking trips where you don't know the laws. If customs confiscate your 150 dollar Leatherman Wave you're off on a bad start compared to my 25 dollar (free delivery to my door) China tool (no brand name) that's build like the Wave but actually has more tools and all locking. The tools, clip and pouch are all sturdy. The pliers have no play and replacable wire cutters. On the outside it has a straight edge sheepfoot blade (less agressive looking), woodsaw, metal file and scissors and all are full size with liner locks. On the inside the other tools with a differnt locking system. The philips head is 3D so you can use an adaper set. The tool is rather heavy because of the heavy duty build but not a problem for in my backpack.
@clintonlewis1261
Ай бұрын
cool that it,s that cheap ,looks good 👍
@neilsenhall3790
Ай бұрын
awesome review , however here in the UK the amazon link you put up wont ship to my country , would there be any way you could supply British Amazon links??
@gideonstactical
Ай бұрын
I can look into that!
@neilsenhall3790
Ай бұрын
@@gideonstactical cheers
@Ashton.everydaycarry
Ай бұрын
Thanks for the good review as always. I agree that if you just need a multitool to have around the house or put in a bag, i feel like for $15 you can't really go wrong. But for heavy duty use, Leatherman might be a better option despite the price.
@cowboyup7096
Ай бұрын
Never owned a Leatherman the only thing I've ever owned is gerber
@JCRF
Ай бұрын
What watch are you rocking in this video?
@gideonstactical
Ай бұрын
Casio G-Shock love those things.
@JCRF
Ай бұрын
@@gideonstactical nice! I’m in the market for one, which model is that? Never seen it
@barrybueler3356
Ай бұрын
$16 wow someone’s running a slave shop 😂 I’ll stick with American made (Leatherman) 😃
@atomicsmith
Ай бұрын
They are not all made in the USA. In fact they’ve been pulling that label off more and more of their tools. They keep raising the prices though…
@barrybueler3356
Ай бұрын
@@atomicsmith from what I hear the vast majority or leatherman is made in America besides some of the tools on some models because they have no other option to source them in the states and I can understand having to go over seas for parts that just aren’t made in America or aren’t made in enough quantity to keep up with production but they are tested to leatherman standards when they have to do that. I m guessing they wouldn’t have this problem if Americans would stop buying Chinese etc forcing American makers to shut down or go overseas. When it comes to prices what doesn’t go up in price almost every year with inflation supply and demand etc.
@jasonaffeldt7838
Ай бұрын
On a tight budget a Milwaukee fast back utility knife/driver, slip joint pliars, and SAK knife of your choice be a better system IMO vs a multi tool. I do own a couple leatherman tools I've had for years that I use and enjoy. 2024 leatherman have gotten crazy expensive. Thanks Aaron for a good review. Take care. 🇺🇲🔪🌲🔥
@edwardfletcher7790
Ай бұрын
I'd still rather go to a Pawnbroker and buy a secondhand Leatherman 👍 This thing looks full of sharp angles and hot spots....
@user-mu4wz9fc3x
Ай бұрын
Mp600
@SIGMAMINDEDMGTOW
Ай бұрын
If it's not either a Leatherman or a victorinox swiss tool, you're pretty much wasting your time, and your money too. Leatherman and victorinox are king 👑👑.
@brawndothethirstmutilator9848
Ай бұрын
Not a good way to view the situation. Cost/Value analysis always has its place in a decision matrix (which should prominently include your personal usage case for the item).
@keeperoftruth5951
Ай бұрын
My Swisstool collects dust while my bibury and Ozark trail multiforce actually get put to work. The swisstool models are shiny toys that for some reason get mistaken for being high quality by morons because they are shiny lol
@antchung2370
Ай бұрын
Half empty bottle is noisy.. Won't work for hunting.. I still love the channel ❤👍
@mugsofmirth8101
Ай бұрын
Made in China
@fcacace0211
Ай бұрын
anything gerber is overpriced
@DuctTapenWD
Ай бұрын
Can't do the facial expressions
@MosMatically
Ай бұрын
Why keep buying Gerber? It’s literally gas station quality knives n tools
@JohnDoeGoGoGo
Ай бұрын
Why is this ging' screaming tactical, but it seems he never experienced a tactical situation in his life? Am I mistaken?
@gideonstactical
Ай бұрын
Tactical definition (of a person or their actions) showing adroit planning; aiming at an end beyond the immediate action. relating to or constituting actions carefully planned to gain a specific end. Usually in a military situation but not always. Never claim to have lived through Tactical situation. In fact, I regularly remind people I’m just an average Joe given an opinion.
@keeperoftruth5951
Ай бұрын
You sound like a boot who didn't make it through basic. You mad he makes more money in ad revenue in one video than you will in a year
Пікірлер: 78