I was literally thinking in my head the whole time, "I wonder how expensive his 3d printer set up is" and then you revealed the foam. Faster, cheaper, easier to manipulate, the tin foil trick, you're a genius bro. This is exactly what I've been trying to find, but didn't even know I was looking for. Thank you
@darklros
3 жыл бұрын
what an useful advice and not just for D&D, even though Warhammer players may not like the grid pattern on the more organic environements (like caves and grasslands) but it's easily avoidable, this goes to my favs :)
@RPArchiveOfficial
3 жыл бұрын
Definitely! 😁
@corphish129
Жыл бұрын
I'm probably never going to make terrain for my games, but these videos are enchanting. Making terrain seems like practically a separate hobby, and if I were less busy, I'd be sorely tempted to try it out.
@villain19192
3 жыл бұрын
I just wanted to say, I have seen many vids about making terrain and dungeon tiles but was never really inspired. After watching this vid I immediately started building dungeon tiles and walls. You have inspired me, I've watched this vid about 4 times since and am still in awe. You have something special here, keep at it and no doubt you will boom on youtube.
@RPArchiveOfficial
3 жыл бұрын
That is amazing to hear Jesse! 😁 I hope you really enjoy what you end up with :)
@ChuckLauer
3 жыл бұрын
This is incredible. I love all your videos (and am a patron), but honestly this jig is very likely to be the secret ingredient that lets me really take off on some of these projects. Thank you! And thank you to the person who came up with the idea!
@RPArchiveOfficial
3 жыл бұрын
Thanks for the support Chuck! Glad I could help 😁
@depapa701
3 жыл бұрын
Awesome. I made a little list for myself a few weeks ago to find the videos I need. Every video on my list is mentioned here 😅 thank you for this summary it comes in handy
@RPArchiveOfficial
3 жыл бұрын
Glad I could help 😄
@KingVikidin
Жыл бұрын
this channel is incredibly under rated
@jameseustice7144
3 жыл бұрын
Extremely helpful! Just what I needed, there's always so much to do, so little time, and I always have trouble prioritizing.
@RPArchiveOfficial
3 жыл бұрын
Glad it was useful James :)
@hyperskeletonhead
3 жыл бұрын
didnt this release 2 minutes ago or is the computer acting up
@RPArchiveOfficial
3 жыл бұрын
Patrons get early access :)
@rakion299
2 жыл бұрын
I love to see you create some dessert themed modular tiles. Dunes could be really cool in the stile of the hill terrain
@colinnielsen74
Жыл бұрын
Sorry to be that guy, 6 months later. But it's Desert
@rakion299
Жыл бұрын
@@colinnielsen74 i think you understood me wrong, i want ice cream themed tiles
@Miggy19779
Жыл бұрын
@@rakion299 What do dunes and hills have to do with ice cream :)
@jennythyme1729
10 ай бұрын
@@Miggy19779dunes of caramel and whipped cream...
@edwardhood6252
Жыл бұрын
I've watched every video that is on your channel, as of the time of this comment, and I will DEFFINITELY be revisiting them as I begin building my terrain for gaming.
@andrewbowenssylvanianfamilies
2 жыл бұрын
After seeing everything that you have done with the magnets, I am never going to use sellotape again when mounting tiles and walls together. Your work is amazing.
@RPArchiveOfficial
2 жыл бұрын
Thanks Andrew! I've been exploring magnetization further in bonus videos on my Patreon for accessories and more, if you're curious :)
@andrewbowenssylvanianfamilies
2 жыл бұрын
@@RPArchiveOfficial Excellent. Well, I have just ordered a load of magnets now, and I will be converting all my model sections very soon.
@Eantrin
Жыл бұрын
Those buildings with the bright blue shingles and medieval style make me think of wc3 human structures and that makes me smile.
@RPArchiveOfficial
Жыл бұрын
That was the inspiration :)
@cedric233
3 жыл бұрын
It's a very good job. Watching your game tables is a real pleasure, playing a game on them must be just beautiful and enjoyable !!! Thanks to sharing with us !
@RPArchiveOfficial
3 жыл бұрын
Thanks Ced!
@user-pn3ov5qy6d
11 ай бұрын
Just found your channel after decades of flat builds and bulky dungeons. Fantastic content! Thank you! (Ive started with your Skyrim themed wood platforms!)
@KevinTheDane
3 жыл бұрын
Your stuff is just amazing! I've watched it thrice now 😅 If I ever find time to make my D&D channel, I'm definitely going to make my stuff RP Archive compatible 😊
@4plainlimbs
3 жыл бұрын
Enjoy your holiday! Well earned. Class tutorials and your vids are a highlight. Thinking for an “easy vid” for you. Maybe a showcase of your different terrain? Maybe with some nice dioramas? Just so we can see the pinnacle of modular terrain in 1 go!
@RPArchiveOfficial
3 жыл бұрын
Honestly might be a good one if I can find a good title - getting people to click is half the battle! 😄
@4plainlimbs
3 жыл бұрын
@@RPArchiveOfficial “the most modular board in existence, I can make anything with this” I sympathise!
@brandongiles6875
3 жыл бұрын
Inspiring. I think the fist thing I need to do is magnetize my already existing dungeon tiles, then start on some walls.
@RPArchiveOfficial
3 жыл бұрын
Awesome! Good luck man!
@Reno0513
3 жыл бұрын
Short and sweet, yet packed with useful information. Thanks!
@RPArchiveOfficial
3 жыл бұрын
Thanks Reno!
@walterbarr9709
4 ай бұрын
Matt, maybe it's just me but everytime I see your spiders; either on the ground or up the walls; I love 'em. They are fabulous. Love your work mate.
@LetsTalkLions
8 ай бұрын
Bro, this is incredible. First off, your dedication to creating an artistic video WHILE also creating visually stunning DND tiles is amazing. The whole thing is inspiring. Thanks for all the tips and links provided
@robertevans3173
3 жыл бұрын
Have a good time on Vacation. And please be safe. Thank you for the content. Even those of us who have been around for a while can use what is here. Thanks again.
@RPArchiveOfficial
3 жыл бұрын
Thanks Robert :) I will!
@vladtheinhaler146
3 жыл бұрын
This is the BEST channel for crafting. Recommended for intermediate level. But after you get a few beginner items under your belts, this is where the Masters live.
@vladtheinhaler146
3 жыл бұрын
Hey do you have facebook. I made toppers for "stackers" i think they're better than everything else. I'd like to share the idea with everyone.
@RPArchiveOfficial
3 жыл бұрын
Not a public Facebook group, there is a private one for patrons though :) If you share it in creative table designs or tabletop crafters guild and mention me that should work too - message me it on Facebook (to the page) in case I miss it!
@RandomStuff404s
11 ай бұрын
This unlocked a new hobby for me. Thanks for sharing
@RPArchiveOfficial
11 ай бұрын
Glad to hear it!
@mathewspieker
Жыл бұрын
First video. Earned the subscription already.
@TomJones0065
3 жыл бұрын
This is a GREAT REMINDER of all your Art, I have been needing some refreshing on these very things, I myself NEED A HOLDIDAY/VACATION. Refresh regroup is ALWAYS A good idea when ones thoughts get CLOUDY! And Damn my mind is FOGGY these days, THANKS SO MUCH! I will Find a way to take a Well over due Vacation/Holiday! Have Fun!! THANKS SO MUCH, " who would not like this video" DA!
@RPArchiveOfficial
3 жыл бұрын
Thanks man, definitely hoping a holiday is the solution! 😁
@kayura77
3 жыл бұрын
Excellent video! 💯😁 Enjoy yourself on holiday!
@RPArchiveOfficial
3 жыл бұрын
Thank you! That's the plan 😄
@robavie
3 жыл бұрын
Have a wonderful holiday. Relax, refresh, and restore.
@RPArchiveOfficial
3 жыл бұрын
Thanks Rob :)
@Carty239
3 жыл бұрын
Have a great holiday, Matt! Looks like I'm going to hold off on making those mountain blocks for the update! (I'm loving all the magnetisation)
@RPArchiveOfficial
3 жыл бұрын
I did! I'll be looking at the upgraded blocks soon enough - just want to make sure they're gonna work right 😄 I'll keep showing updates on it in the livestreams!
@Carty239
3 жыл бұрын
@@RPArchiveOfficial Glad you had a good break, you deserved it! Don't rush, we appreciate your quality control.
@animeguysrhot50x
3 жыл бұрын
Loving the old content throwbacks 😋
@Missclicked
Жыл бұрын
thank you so mutch this was the exact thing I needed
@rhiotre1958
3 жыл бұрын
Fantastic video as always! Enjoy your holiday and that battery recharge! Look forward to seeing you again soon!
@RPArchiveOfficial
3 жыл бұрын
Thanks man!
@kwequay5605
3 жыл бұрын
Pretty sure we've watched the entire back catalogue several times, I'd love to know, have you ever done a video or write up of your crafting desk? Your full setup for paint storage, magnets for hanging tools, etc?
@RPArchiveOfficial
3 жыл бұрын
I have not :) the vast majority of it boils down to hobbyzone desk modules - even the magnets I hang the rulers on 😄
@kwequay5605
3 жыл бұрын
@@RPArchiveOfficial thanks so much for getting back to me so quick! I will check them out :)
@hadynmcloughlin4661
5 ай бұрын
Love the simplicity of these design and tips thanks for sharing
@TheMalvoron
2 жыл бұрын
Okay, that's it. You got me. I've watched your Videos the last few weeks/months and got really hyped. But that video was the last drop i needed. and i finally subscribed to your patreon. Material and Wirecutter came today. Though had some trouble finding the right magnets that are cheap in Germany (and don't take 3 weeks to get here) Will start the crafting today, thanks for kindeling my inner fire!
@RPArchiveOfficial
2 жыл бұрын
Awesome to hear man! Let me know if you have any questions 😄
@christophermurray9777
3 жыл бұрын
Great vid
@RPArchiveOfficial
3 жыл бұрын
Thanks Chris :)
@Drajika
3 жыл бұрын
Beautiful! everything! just... beautiful. well done Mr RP Archive!
@RPArchiveOfficial
3 жыл бұрын
Thanks Ted! 😁
@BrokenTypewriter_
3 жыл бұрын
I think his name is Matt, not sure really, I dont think he's ever said it 🤣
@janthummler3548
3 жыл бұрын
very helpful, tanks! Enjoy your holiday
@janetfayard672
2 жыл бұрын
Great video! Solved many of the questions I had for terrain! Thanks so much!
@RPArchiveOfficial
2 жыл бұрын
Glad I could help Janet!
@gideoncurry4921
Жыл бұрын
New to your channel but damn man, you got some gorgeous set pieces
@greenweave3882
2 жыл бұрын
Wow..... havent check out ur videos since you taught me to make amazing terrain out of cardboard!!! This has come a long way! Simply amazing!!!!
@RPArchiveOfficial
2 жыл бұрын
Thanks man! 😁
@tiffanylamb1187
9 ай бұрын
I am so excited I found your site. I expect I am going to learn a ton. Thank you in advance!
@turnipslop3822
3 жыл бұрын
Nice video bud, hope you get a really good rest and recharge as much as you need! Looking forward to your return ✌️
@RPArchiveOfficial
3 жыл бұрын
Me too! I want charged batteries for the next project 😁
@tonysmoot3712
3 жыл бұрын
I need those magnetic interior walls sooo bad!!! I'm gonna have to see if I can afford the patreon. Can't wait to see what inspiration you bring back from vacation! lol
@RPArchiveOfficial
3 жыл бұрын
Awesome! Massively appreciate the support man, and the interior wall video isn't quite out on patreon yet, so you've got a month or two anyway :) That said there's other stuff on there and I really appreciate the support 😅
@aneknymph4946
3 жыл бұрын
Nice video. For a feedback: - Dimensions - In intro put pieces made/presented in video on the mat to clearly show its dimensions and compiled cheat sheet for basic pieces dimensions like for materials would be nice (especially the height of the things isn't accented enough and hard to find after a few movies from the series). - Other thing i would add to a video (or 4plainlimbs showcase idea) is estimated amount of materials for different project (like hill, building, temple set) in similar way to recipes in cooking series. For a starting questions with xps cutting and materials: - I plan to create custom foam cutter as i have electric heart of it ready, what is best height for the wire? - What is best foam size to choose to start build modular dungeon if locally I have available in tolerable prices: 3, 6, 9, 20, 30, 50, 80mm and, with low amount in shop, 10, 12, 18mm?
@RPArchiveOfficial
3 жыл бұрын
I'd go 30mm and trim it down to either half inch or 1 inch as needed. I can't advise on the homemade hot wire, I've never made one or done a tutorial on one :)
@ResoluteGryphon
3 жыл бұрын
This video is a very nice showcase reel. All of your builds look amazing!
@guylaindeschenes9793
3 жыл бұрын
Wow. Really like your modular tiles system. You should sell 3d printable STL files off it, with places to glue magnets already built-in.
@RPArchiveOfficial
3 жыл бұрын
Give me time... 😅
@powersave2
3 жыл бұрын
Enjoy your break! Get recharged and then come back with more epic builds!
@rowanmcalpin
2 жыл бұрын
First of all: woah. I just found this channel in my recommended videos, and I am blown away. I don't understand how you only have 50k subs. You deserve at least 1M. Second of all: have you considered selling tiles like this? You would be able to sell it for a lot more than the cost of the foam. These tiles are just as good as DwarvenForge tiles, and they seem almost better in some ways, like the weight (foam isn't very heavy). I'm sure there are a lot of people who would love to purchase a set of these without spending $1k+ on DwarvenForge tiles. Last of all, remember me when you are famous 😂
@RPArchiveOfficial
2 жыл бұрын
Thank you! Unfortunately logistically selling these things would mean moving focus from the channel, and I much prefer helping people and sharing my ideas this way :) Long term I'm planning some other stuff for people with little time, but I need more patreon support before I can get it all set up :)
@richardokeeffe8375
3 жыл бұрын
Brilliant! Just what we needed!
@RPArchiveOfficial
3 жыл бұрын
Thanks Richard!
@jacobhope6164
2 жыл бұрын
Thanks Matt! Enjoy your holiday!
@RPArchiveOfficial
2 жыл бұрын
Been, returned and launched a patreon discord server the second I got back 😂 it was very relaxing thank you :)
@LilyHooper
2 жыл бұрын
Im just getting started building. I got most of the tools I needed a while ago but I got busy with work and now I'm getting back into it. This video is amazing and really helped me kind of understand where and what I want to start with. I think I'll just start with a nice set of dungeon tiles maybe like 20 or so 3x3 and a few bigger and smaller ones here and there. I figure I can always build onto that nice base of stuff and they should make good enough floors for houses when I start making walls too. I've been dming for years and have always wanted to add more verticality over just plain battle maps and I am excited to try my hand at this kind of stuff. Seeing the cave demo you had in this video really excited me to get working on this stuff. I just really hope I can find some 3inch xps foam because gluing a bunch of 1 inch foam sounds like such a pain. Thank you for the great video.
@RPArchiveOfficial
2 жыл бұрын
Awesome to hear! I've actually got a variant of the Mountainblocks coming soon on my Patreon as a bonus video, it should be easier to make with 1" foam :)
@goronenthusiast
7 ай бұрын
Been looking at getting into TTRPGs for a while now and man, have these videos been helpful/inspirational, keep up the amazing work! One question I had is how do you tend to implement terrain into your games? I.e. you use terrain for everywhere, only encounters, or kind of an in between. Any answers would be hugely beneficial, thanks!
@andygb4
3 жыл бұрын
great video as usual. Now I only need the time to actually build all these awesome things!
@RPArchiveOfficial
3 жыл бұрын
You'll get there :) a little here, a little there...
@RaiderAvian
3 жыл бұрын
Your videos are wonderful and am glad that you came this far with the support of fans. Hope you have a great time on vacation. While am sure that your patron group has plenty of ideas going about, have you ever considered incorporating found objects in your builds? I saw your use hair curlers for cages. Have you noticed beer caps can hold minis? Some can be used as markers, or even help non-magnet minis hold on. I dont have magnets for my games (though am looking forward to building my own terrain one day, when living conditions are more in favour of it, lol). But found these caps very useful for my tree trunks (more like freestanding logs lol) to indicate to players which ones are 'climable' and others that are too skinny to support them. I am planning on making more support caps for minis climing walls, walking on angled surfaces etc. Your hollow base minis look cool and very versatile, though personally like thin bases so they dont look like they are on mini plinths. Looking forward to your next video!
@RPArchiveOfficial
3 жыл бұрын
Interesting idea! I generally try to avoid materials if I can still tell what they are originally under the finished paint job, but that's personal taste :)
@famguyrules90
2 жыл бұрын
Matt your stuff is so good! Just got done making my first set of 16 magnetised floor tiles with your flagston texture you showed on patreon, and while I'm definitely still perfecting my process for accuracy and evenness, I am still super happy with the result. Going to start making some wall tiles next. How many would you reccomend as a good amount to make? Thanks for your amazing content mate!
@RPArchiveOfficial
2 жыл бұрын
Thanks man! There's a list of how much I made of each thing in the archive index pinned post on patreon :)
@Timeremortem
3 жыл бұрын
I think i got my tile system figured out. Using a mix of yours with som modifications. I put a rubber metalic sheet inside and as long as its only 2mm foam on the top everything with a magnet like minis/furnitures or walls will stick really well. The issue before was the top foam was 5mm thick and it was to thick for most minis magnets. Then i use your magnetic system to the sides. Once i done that i will see to expand to all sorts of tiles making and mixing so they all work togheter. Soon as the dungeon starting we move on to wood tiles. Grass/desert/snow/pavememt. Then i think i look in to the caves you made and see how well they fit with what i made. We figure we make 2 types of walls. 1 side wall. Similar how you make yours with magnets that attach. Then center walls that just have magnets flat down and top to stack but that we make half the size for easy vision over incase we end up having allot to move around. Your guides been gold to me. Thanks.
@RPArchiveOfficial
3 жыл бұрын
Glad to hear it! 😁
@metal8113
Жыл бұрын
When are you going to stream a hour play through of your next campaign using all the cool terrain? Id pay to watch 😂
@jennythyme1729
10 ай бұрын
Agreed!
@kellymaple4513
3 ай бұрын
Good Sir, you could make an absolute fortune selling your terrain tiles. Individually, as sets, by theme, basic floor tiles to extra accessories. I would buy the heck out of that.
@xornxenophon3652
3 жыл бұрын
Very nice; I will start with some trees and grasslands.
@RPArchiveOfficial
3 жыл бұрын
Sounds cool :)
@OhNoRh1no
3 жыл бұрын
can you make a playlist of all the videos you mentioned - that way one can progress through them easily knowing they are doing things in the "right" order? awesome and inspiring stuff - thank you!!
@RPArchiveOfficial
3 жыл бұрын
Good idea! I'll make one as soon as I get a chance after the holiday :)
@reinaldorodrigues8425
3 жыл бұрын
Oh boy this is a job well done! But i would like to give you a challenge, how abouta make a custom chess grid as if it was a warfare
@bywd
2 жыл бұрын
Love your stuff matt! Have a nice holiday
@RPArchiveOfficial
2 жыл бұрын
Much appreciated man, I did! 😁
@CyFr
Жыл бұрын
might recommend for mountain terrain to make the surface out of foam and use cardboard for your vertical heights using magnets to snap them together.
@jonathanlochridge9462
2 жыл бұрын
I find your modular terrain system interesting and useful. One thing I have been thinking about is what sort of tiles would be usable for both sci-fi, steampunk, post-apocalyptic, and fantasy games? Grass and hills can obviously be used for a wide variety of games. Sandy or rocky tiles as well. Cave tiles are fairly flexible too. I think a lot of the wall designs and such could be painted to look sci-fi or post apocalyptic at least. Steampunk is a bit easier as I think you could juat take the standard terrain and throw in some pipes. Or maybe a few roofs with more smokestacks that look more industrial
@RPArchiveOfficial
2 жыл бұрын
Pretty much as you say, wood shacks also work well in all 4 :)
@jonathanlochridge9462
2 жыл бұрын
@@RPArchiveOfficial I guess so. I know for rundown areas trash barricades with texture and stuff work well across both sci-fi and post apocalyptic. Sometimes steampunk? But those usually don't fit and clash with anything fantasy. Although, I have been thinking about alternate coloration for tile types. You mentioned add-ons in a lot of your videos. But more brown and dead looking grass tiles could be used in more evil areas to enhance to look in combination with other modular wall tiles and such.
@RPArchiveOfficial
2 жыл бұрын
True :)
@anonymousclone6453
2 жыл бұрын
Ok, so I’ve got a question, since I haven’t found a video super focused on it…what dimension and tips/tricks would you use for walls??? I’ve watched several videos of yours that included walls and I can’t seem to find a concrete answer(I could also be oblivious if you have made one, which I wouldn’t put pass me) thanks and keep up your amazing job!
@RPArchiveOfficial
2 жыл бұрын
This video has all the initial info on walls :) kzitem.info/news/bejne/znhmnph5bpNyom0 Then there's extra stuff in the cottage video. The recent getting started video has a better version of the floor tile tutorial, and Patreon has an even further updated magnetic version with interior wall functionality :) Also in the patreon there's an index post I'm building up with timestamped links to each relevant video for each project and extra tips and tricks I've used/thought of since then. So far it's just for the core stone walls/floors etc, but I'm aiming to expand it to all my videos :)
@ravencraft3074
2 жыл бұрын
your skill is amazing. I need to step up my game.
@xamotrogue4362
8 ай бұрын
Hi Matt... Just found your channel...you're brilliant m8. I'm beginning to plan a layout. Not for TTRPG, but more like a model railroad crossed with MTG. My plan is to use 1/18th scale action figures on terrain using cards for the hero and separate cards for the equipment. Your system is precisely what I'm looking for. 2 questions....can the STL be scaled up enough to use at the level I need? And how do I go about getting some. Love the channel....
@i.am.willow
Жыл бұрын
I love how these squares can be so versatile. As someone who is brand new to building, could you recommend the tools and materials needed to start?
@RPArchiveOfficial
Жыл бұрын
Check out my equipment list, there's a getting started section :)
@TerraNova208
2 жыл бұрын
First of all, your video is amazing! One on the best end result I've seen so I've decided to start following your turotial for my own collection! A quick question though. How many of each tiles and blocks would you recommend for a versatile yet not too time-intensive set? I'm Planning on starting at cave/grasslands/brick tiles then on to walls and blocks later. Thank you so much for making these videos!!!
@RPArchiveOfficial
2 жыл бұрын
I think I mention in the notes at the top for the cave tiles, I'm currently working on an easy to browse index of all my projects and videos with my comments, notes and suggested build amounts in the pinned post over on patreon :) it's not quite finished yet, but recommended amounts is something I'm looking to add soon!
@calvin4d
3 жыл бұрын
What materials do you use and where do you get them? You sound like you're from the North East as well so if you know any good shops I'd love a pointer 😊
@RPArchiveOfficial
3 жыл бұрын
It's all in the equipment list in the description - you'll get more detail there than I can fit in a comment 😄 I am! Honestly though I get most of my stuff online, I think the only physical shops I use are games workshop, hobbycraft, wickes and North East Model Centre (the model shop on the Chester-le-Street dual carriageway), and even then usually only when I can't get quick enough delivery 😂
@lilcaps
5 ай бұрын
I use hexagonal prisms so I just make terrain digitally and cut it out in a grid for 3d printing but seeing this I might start using foam
@themaydayman
8 ай бұрын
Do you recommend using a 2x2 or 3x3 basis for terrain and why?
@Rasnadov
3 жыл бұрын
Awesome video. For Next GET STARTED you could show some alternatives to Foam Board. I have a really hard work trying to find them where i'm from, and when i do, its expensive...
@RPArchiveOfficial
3 жыл бұрын
Have you seen my fast and cheap tips video? I did a section on that exact topic :)
@Rasnadov
3 жыл бұрын
So sorry. KZitem says i watched, but my memory fails me... well... lets watch it again. Thanks.
@gustafwidegard7768
2 жыл бұрын
Your creations are stunning and your videos really informative and calming to watch. Thank you!
@RPArchiveOfficial
2 жыл бұрын
Well thank you for watching Gustaf! 😁
@SirLuquent
3 жыл бұрын
Any plans for snow terrain?
@RPArchiveOfficial
3 жыл бұрын
At some point definitely, but there's a lot on my to-do list 😅
@connorbingham-davis2091
4 ай бұрын
Love this video, and it's got me started on hobby crafting tabletop terrain. One question though: does anyone else struggle to get the magnet polarity right when gluing them to the basic dungeon tiles? Does anyone have any tips for avoiding accidently getting the same polarity facing each other? I always seem to get the wrong polarities aligned.
@RPArchiveOfficial
4 ай бұрын
Do all the South, then all the north, don't bounce between the two :)
@javierarias9587
2 жыл бұрын
It would be super cool to see snow terrain! Like tundra and all tha, snow isntead of grass, rocks with snow, frozen water, all that stuff, just food for thought.
@RPArchiveOfficial
2 жыл бұрын
It's definitely coming at some point 😅
@javierarias9587
2 жыл бұрын
@@RPArchiveOfficialWOH! I did not expect that answer coming hahaha, NICE!
@nicklasandersen7785
2 жыл бұрын
would be nice with a video of the most important tools of trade.
@MySolaar
Жыл бұрын
nice!
@AuqiaGamer
Жыл бұрын
There seem to be many options for foam to buy, from a little workshop I still have some blue colored foam left, but that isn't thick enough to my opinion to make floor tiles out off.
@RPArchiveOfficial
11 ай бұрын
Try ordering sheets online, 25mm/1" thick is usually good, though I go 2" now I have more experience cutting (it can be challenging for a newbie)
@EnkkyRiver
2 жыл бұрын
Master!!!
@Adam_First
Ай бұрын
Great video
@Stuggesjoerd89
7 ай бұрын
Nice video!
@pst5345
Жыл бұрын
Here in Germany those thick foam slabs ppl use in videos are not a thing unfortunately. We have to buy multiple small pieces of xps. That is why I love the dungeon stacker concept. I can build infite numbrrs of them and put them together to have most big structures covered
@justinotherday6199
2 жыл бұрын
XPS Foam has freaked me out for a while. I've been using dollar store foam core boards, and it gets the job done, but it is what it is. Can anyone offer any advice for someone without a hot wire cutter that is looking to move toward XPS? Best way to cut for clean edges perhaps? Thanks for your content, Matt. Hope you had/are having a great holiday.
@RPArchiveOfficial
2 жыл бұрын
Multiple small cuts with a sharp knife :) black magic craft has a video on just that actually! It's in his beginner playlist
@rancid002
Жыл бұрын
If I don't have the time to invest in learning to be crafty. Is there a place where I can purchase premade sets of organized pieces I can rearrange and reuse regularly?
@CmikeDnD
2 жыл бұрын
magnet question: How thick can the foam be until the magnets don't reach through if you were to hide the magnets?
@RPArchiveOfficial
2 жыл бұрын
Not far, if you want to retain strength. Less than 1/16" :)
@CmikeDnD
2 жыл бұрын
@@RPArchiveOfficial gotcha, that helps me plan better, appreciate it.
@arnonuhm6363
Жыл бұрын
Hey, first i want to thank you for your amazing work and that you share your experience with us. I am new at this and want to build my own dungeon tiles for Heroquest. My problem is that every good Video is in english and everybody is talking about inches etc. But 1 inch means 2.54 cm here in germany and this is a strange size to work with. I also don't understand what 3" square of 1/2" means... (i think 1/2" means a half inch of thickness) can you tell me the size of your floor and wall tiles in cm/mm? (Wide, Height, thickness and how big is 1 square/field for the miniatures to walk on, i would think 3cm but i am not sure) And for the future it would be perfect if you could write those information in your video discriptions because i am sure you have more german followers like me that are having problems with the size informations. Again, thanks for your great videos and many thanks, that you also give so detailed informations about the different countries in your material list. That helps a lot! Greetings from germany
@RPArchiveOfficial
Жыл бұрын
Hey man :) I use inches for a range of reasons, not least of which being d&d and warhammer uses it! But it also halves repeatedly with ease in small dimensions, something cm does not... There's an inches to cm converter at the bottom of the description of every video though, if that helps? Though honestly, I'd recommend that just picking up an inches ruler, for this hobby I found it makes a lot of stuff easier :)
@stuartsmith6823
3 ай бұрын
Your videos and ideas are Awesome. I am just starting to getting into DND since I was a kid. Anyways the one question I have is should the grid system be 1 inch or 1.25. The minis I have all go over the 1 inch but fit nicely on 1.25. These are wizkid deep cuts minis.
@RPArchiveOfficial
3 ай бұрын
The grid is there but I never even use it anymore. Ruler and measuring is so much better, just by giving everyone a little measuring pipe cleaner :) It's designed around 1" though, 1. 25 won't fit the tiles, and changing widths messes with tile compatibility
@manokriko7353
Жыл бұрын
Is there any alternative of the XPS foam? It's amazing it doesn't exist in Greece, and typical polysterine doesn't give this vibe.
@ethandavide6068
3 ай бұрын
So for someone who isn’t artsy but still wants terrain, can I hire someone to make a set for me?
@brooksdibble6685
2 жыл бұрын
Incwab! Matt I love you
@hezakighamorgan9974
2 ай бұрын
Idk how you make the magnetization look so simple and easy. I'm brand new to crafts, and what keeps happening to me is two magnets will pop off instead of just one, and while trying to get the second magnet off, I end up ripping out the first one and having to redo it.
@RPArchiveOfficial
2 ай бұрын
The key is indenting the magnet a little so they don't touch when connected. Touching makes them far stronger and more prone to that Using the glue gun I recommend in the equipment list also helps because it makes a nice tight hole for them :)
@baltimark120
4 ай бұрын
And here comes the one million dollar question: how do you know which side is north and which is south in the magnets?! XD
@RPArchiveOfficial
4 ай бұрын
You pick one direction to be north at the start of your collection and go from there! 😁
@xMISTERxJ
4 ай бұрын
Love the video and I'm absolutely going to try making some but I was wondering where I can get a copy of the modified jig that was created. The link in the description doesn't have the open layout jig so walls can be made too.
@RPArchiveOfficial
4 ай бұрын
The jigs in the video should be available on patreon, not sure which specific jig you're referring to? :) maybe timestamp it so I can see?
@xMISTERxJ
4 ай бұрын
@@RPArchiveOfficial The half inch one you show @ 2:18. That was probably my mistake, I just clicked the thingiverse link and saw the other versions but I'll check the patreon.
@UltronMark1
7 ай бұрын
Where did you get the saw to cut the foam?
@bphibbs88
Жыл бұрын
Hey, started following your videos recently. I really love your work! I'm curious, it seems like you use 3 inches as your kind of standard measurement for tiles and lengths of walls. What is your reasoning for this? Why not 4 or 5 inches?
@RPArchiveOfficial
Жыл бұрын
Matching BMC 3" tiles initially :)
@HollyEBrown
Жыл бұрын
Which magnets do you use for the tiles and what is the tool you’re using to make the little holes, I couldn’t locate them on your materials list.
@RPArchiveOfficial
Жыл бұрын
Magnet guide and glue gun advice is in the equipment list in the description :)
@ShaiBoiz
Жыл бұрын
i have seen a ton of your videos and have been inspired to make dungeon tiles. I've got one question though, can i use other XPS foam or should i mainly use the one you linked in the equipment list?
@RPArchiveOfficial
Жыл бұрын
You can use other xps, though quality varies :)
@felipeklerkk
Жыл бұрын
Super cool this one. Maybe I miss a part but there is a thing make my craft life a nightmare. After finish a craft using sealing like varnish or mod podge. Then, after giving a good time to driy (more than a week). When I put tiles together. Magnetis are getting stuck taking off the paiting. This situation happen so ofter, piecies made more than a month (with meaning super dried) happen to, this situation is worse when use a 6x2mm magnetics. Are there a way to ensure the paint is fully dried and it will not stick each other? should I use a specific sealing? looks like the paint are still wet for a looongg lonng time, then when have a pressure (2 tiles together) they "leak" off glueing on the outher tile.
@RPArchiveOfficial
Жыл бұрын
This can be mitigated by a few things. Spray with a few layers of matte varnish to finish, matte is important its less smooth and bonds less. Heat also makes the bonding happen. Acrylics take a long time to fully cure even if dry, don't attach them for storage for maybe a week. Finally, adding dirt grout weathering as in my city tile video practically removes the problem I found. Magnets are a separate problem, check out the equipment list glue gun section, massively makes it easier. You can also reglue popped out magnets with superglue as it'll stick to the hot glue in the hole and not melt the foam. Or use foam safe superglue instead, is something I'm trying :)
Пікірлер: 335