Your products are the best beginners need to start with tools like this not junk.
@luigipati3815
2 жыл бұрын
got mine today, this tool is worth every cent! now I know exactly how low 'low action' should be, no more ambiguity. I had first got a d'addario and watched their useless 3.5 video, then saw this one and bought the tool. Knowledge + tool= power. I am a musician, not a tech, so to me this is really worth it
@BadBoy-mv8lz
Жыл бұрын
I have the D'ADDARIo too..is this any better and why?
@luigipati3815
6 ай бұрын
watch the video agAIn and compare the two
@bradenr4463
3 жыл бұрын
You should make a video showing the string height gauge also being used as a fret rocker.
@SimonT54
5 ай бұрын
I own the string action gauge referenced in this video. Simon says get yourself one! They are handy!!
@stuartblack6803
3 жыл бұрын
The handy pinhole convinced me to get one.
@planet_b1ue
Жыл бұрын
every guitar player needs to see this video
@MusicNomadCare
Жыл бұрын
We're glad you found it helpful! Thanks!
@jacksawyer3626
Жыл бұрын
I was hoping on you showing exactly how to use the string height section of the gauge. Like a closeup of the string and gauge. For example, does the string block out the line on the gauge, or is the string above or below the line?
@MusicNomadCare
Жыл бұрын
The top of the line meets the bottom of the string. The Precision Sting Action Gauge has instructions and a chart for recommended action heights.
@900rr
Жыл бұрын
Thanks, just got mine.
@youandwhosearmy6339
2 жыл бұрын
String action guage: Excellent tool. But one way it could be improved upon, if the mm went down to .25 & inches to .010 so you could use it for accurate neck relief measurements @7th fret. Other than that, faultless. So glad I bought one. Regards from the UK.
@BadBoy-mv8lz
Жыл бұрын
O.25 are inches and 0.10 are mm?
@AnonymousUser66649
14 күн бұрын
This type of tool would be really inaccurate and just too big for checking neck relief. The average neck relief would be the thickness of one of those lines approximately. Feeler gauges are way better for measuring relief.
@konjunto2477
Жыл бұрын
Got my kit with the Instruction Booklet. I wish the booklet was larger. It is very small and the print is small. Not all of us have Eagle eyes! lol
@MusicNomadCare
Жыл бұрын
you can download the book here and enlarge it to a size that work for you, it can also be printed at a larger size that works best for you www.musicnomadcare.com/How-To-Advice/Setup-Hub/Setup-Manual/
@rickbrown2154
Жыл бұрын
The string action gauge is awesome Metal with black lettered are hard to see I’m likin this one
@christineblack4654
Жыл бұрын
I like sweet low action. 0.5 mm. so much easier to play and go fast.
@rudymikula7129
Жыл бұрын
Thanks. Great and timely video. I think I'm going to get your string action gauge. I like the way it is laid out. It is very user friendly.
@barankaypakoglu7643
Жыл бұрын
why would you put the capo on the first fret? this is not a truss rod adjustment.
@barankaypakoglu7643
Жыл бұрын
aaaah you want to eliminate the nut factor...
@Cognitoman
Жыл бұрын
Lol why would you put a capo on first fret while adjusting truss rod ?
@barankaypakoglu7643
Жыл бұрын
how do you check the clearance for truss rod?@@Cognitoman
@VanCamelCat
2 ай бұрын
Are the Acoustic Guitar measurements on the tool, the same ones that should be used for classical guitars as well? Also, is your gauge product available worldwide? (and also perhaps on amazon?) Thanks.
@MusicNomadCare
2 ай бұрын
For Classical Guitars the string action height would be 1.20 at the bass side and 1.00 on the treble side (120 thousands bass and 100 thousands treble). Our Precision String Action Gauge is available worldwide. If you are located outside the US you can check our international dealers on our website to see where our products are sold: www.musicnomadcare.com/Where-to-Buy/Find-International-Dealer/ or feel free to reach out to us at info@musicnomad.com to inquire about your country.
@Danielcarrerogg
2 жыл бұрын
Amazing
@dansole5606
9 ай бұрын
I appreciate your video. My fretboard radius is 13 3/4" and each string is adjusted individually. Your radius guage is 14". Do you offer my size? Thanks
@AMGL1989
3 жыл бұрын
Why do you fret the first to check the string height? I noticed that without fretting the first fret the ruler is about .010 off exactly on each 64th and decimal lines. Is that way you recommend the fretting part?
@AMGL1989
3 жыл бұрын
By off, I mean .010 higher than what it reads on my old ruler
@MusicNomadCare
3 жыл бұрын
In the flow, string height comes before nut height. The measurements we have are based on using the pick capo at the first fret. Since the nut has not been addressed yet you would be using a height reference point that could be off. The first fret is a fixed height to adjust from.
@Larryriley3
2 жыл бұрын
So when you say bass side you mean all 3 strings on the low E side and treble side all 3 strings on the high E side?
@MusicNomadCare
2 жыл бұрын
Your process will be slightly different depending on the bridge configuration. email our tech at tech@musicnomad.com your questions and specific guitar so we can help you further
@redmosq4197
8 ай бұрын
I used the gauge for neck relief now strings are choking out when I bend them. 🤷♂️
@karlobluesman
29 күн бұрын
Because your string action is to low. Step one adjust neck relief then the string height action at the 12th fret
@jbn5524
Жыл бұрын
In a tune-o-matic, I first setup the neck relief correctly, and the I try to set the string action as advised. But then I have fret buzzing around 12-15th fret (0-12 feels right). Then, my logic, I relief a little bit more the neck (even going for a not-correct) setup), but still got fret buzzing. The only way around is setring a higher string action. Am I missing something? It may be some frets that require some lowering? Thanks!
@MusicNomadCare
Жыл бұрын
In our Keep It Simple Setup, the flow for a fixed radius bridge is: neck relief first, then radius. If you skipped checking the radius that could be causing some of the issue. We recommend following the full Keep It Simple Setup Flow before before evaluating your frets. www.musicnomadcare.com/How-To-Advice/Setup-Hub/The-Setup-Flow/ If you have any more questions, email us at tech@musicnomad.com and we're happy to help. Thanks!
@animeguitarguy
2 жыл бұрын
4:16 Wouldn't the values here be 1.5 and 1.25 according to the gauge? Thank you for the great products and videos!
@MusicNomadCare
2 жыл бұрын
In our video we are using SAE which if converted from inches to millimeters the 0.06" would be 1.50 on the Low E and 0.05" would be 1.25 on the High E so you are correct with the measurement in millimeter.
@letsridehard
5 ай бұрын
Question on measuring the action at the 12th fret; some people put a capo on the 1st fret (as in this video) but others don’t. Does it matter? Which is the right way to take the measurement?
@MusicNomadCare
5 ай бұрын
The measurements we have are based on using the pick capo at the first fret. Since the nut has not been addressed yet you would be using a height reference point that could be off. The first fret is a fixed height to adjust from.
@losangulos
3 жыл бұрын
Also not available in México
@MusicNomadCare
3 жыл бұрын
Here is our distributor you can reach out to them asking where they can buy: Distribuidora Gonher S.A. DE C.V. Calle Norte 35 #771 Colonia Industrial Vallejo Delegacion Azcapotzalco Ciudad De Mexico, C.P. 02300, Mexico Phone: +52 55 9152 4600 Email: gerencia.ventas@gonher.com www.gonher.com
@vincentsantiago2gmai
3 жыл бұрын
you need show more like 3/64 and 5/64 closer
@vincentsantiago2gmai
2 жыл бұрын
you should show it little better using the camera 🎥 DIRECTLY with the string using it to understand better with the lines you talking about
@MikmawWarriorBrave
7 ай бұрын
Why do you need to fret the first fret when measuring string action height? All other videos showing how to measure doesn't show them fretting the first fret. Wouldnt this result in two seperate readings? If i ask my luthier to set up my guitar to 0.05-0.04" and they use the method without fretting the first string, it would be lower than if i do it with your method?
@MusicNomadCare
7 ай бұрын
In the flow, string height comes before nut height. The measurements we have are based on using the pick capo at the first fret. Since the nut has not been addressed yet you would be using a height reference point that could be off. The first fret is a fixed height to adjust from. Feel free to reach out to our tech at tech@musicnomad.com if you'd like additional information on how we do our measurements.
@MikmawWarriorBrave
7 ай бұрын
@MusicNomadPolish ok..that makes sense...but if I am setting up someone else's guitar action, and the nut is already cut properly, and they specify that they want the action set to .05" on low E and 0.04" on high E, would I still measure fretting on the first fret?
@homer7504
4 ай бұрын
Do you capo the first fret when getting measurements?
@MusicNomadCare
4 ай бұрын
Yes, you capo the first fret when measuring string action. In this video, Geoff has the pick capo at the first fret - Check out 3:43 of the video to see where he shows this step.
@konjunto2477
Жыл бұрын
I have already purchased one of the 3 setup products and am awaiting the seconone from Sweetwater. My question is that if i heard you correctly at 7:10 on a Tele raising/lowering ( right raise -left lower) the action is the opposite of when you have a tun-omatic bridge with thumb wheels. Thank you. From Shelton, Wa
@MusicNomadCare
Жыл бұрын
Adjusting height on a fixed bridge is different than on a individual saddle, please email our tech at tech@musicnomad.com so we can help you further with your question
@konjunto2477
Жыл бұрын
@@MusicNomadCare Thank you.
@сергейсолоницкий-м9ь
3 жыл бұрын
For 10-47 gauge acoustic guitar strings, if the guitar is used as an accompaniment for singing, which action from your point of view is better to choose : Low , Low-med, Medium ,Med-Hi or Hi ?
@MusicNomadCare
3 жыл бұрын
If you are a harder strummer I would suggest Medium. If you have a lighter touch when strumming then use Low-Medium.
@сергейсолоницкий-м9ь
3 жыл бұрын
@@MusicNomadCare Thank you ! I`m not a hard strummer , so If, for example, there is no hump in the area of the 14th fret , then the height is 2 mm or and a little more at the 6th over the 12th and about 1.8 mm or 1.7 mm at the 1st should suit me . It is "Low-Med" (.from your table) . However, you always want the strings to be lower, and lower, but you have to stop . We need to find a middle ground . Otherwise, it can happen as with Tommy Emmanuel: an unpleasant buzzing not just of one string , but of several during the game )), as I was told , and there is absolutely nothing good in this . In addition , the first part of the beat in the accompaniment to songs, romances, etc. has an accent .
@MusicNomadCare
3 жыл бұрын
You are correct in your evaluation. It is better to have a bit higher action for no buzzing and better tone.
@сергейсолоницкий-м9ь
3 жыл бұрын
@@MusicNomadCare Hello! I wanted to ask you "**Fingerstyle most common " from your table 0.07 inches for the 6th string and 0.06 inches for the first over the 12th fret is this for what caliber of strings 10-47 , 11-52 or 12-53 ? And in general, for each of the string calibers listed above, what is the best guitar action for a Fingerstyle performer to choose for someone who plays with an medium or average attack (for those who medium strummer ) ?
@MusicNomadCare
3 жыл бұрын
We would love to answer your question deeper but due to the many variables in your question please email our tech at tech@musicnomad.com so he can get deeper into your specific playing style and needs
@сергейсолоницкий-м9ь
3 жыл бұрын
Hello! I wanted to ask you "**Fingerstyle most common " from your table 0.07 inches for the 6th string and 0.06 inches for the first over the 12th fret is this for what caliber of strings 10-47 , 11-52 or 12-53 ? And in general, for each of the string calibers listed above, what is the best guitar action for a Fingerstyle performer to choose for someone who plays with an medium or average attack (for those who medium strummer ) ?
@MusicNomadCare
3 жыл бұрын
You are correct in your evaluation. It is better to have a bit higher action for no buzzing and better tone.
@losangulos
3 жыл бұрын
He just ignored your question
@MusicNomadCare
3 жыл бұрын
We would love to answer your question deeper but due to the many variables in your question please email our tech at tech@musicnomad.com so he can get deeper into your specific playing style and needs
@stevelewis8919
Жыл бұрын
Whats the difference between this and the fret guru 2?
@MusicNomadCare
Жыл бұрын
Our is a lower price with a convenient chart to help guide you, on top of all our inch measurements you get metric string action which I don't believe they give.
@ericfrost3244
Жыл бұрын
I have a fender strat i used the action gauge like it show i did everything in the stratocaster video and its still buzzing
@MusicNomadCare
Жыл бұрын
Thank you for reaching out. Please email tech@musicnomad.com to help you with your setup.
@anthonyz.4560
11 ай бұрын
Did you figure it out?
@ElBuddyChristo
3 жыл бұрын
Why is this String Action Gauge not available in Canada? It looks like some of Music Nomad's tools and products are available here through the guitar/music stores (e.g.: L&M/Solo Music and Amazon) but there is a lot of tools and products that are simply not available - and, sadly, your direct site does not ship to the Great White North. I would really like to purchase one but haven't had much luck with US vendors shipping to Canada
@MusicNomadCare
3 жыл бұрын
Jesus, most of our products are available in Canada, but the new gauges we just started shipping so I would expect them to be available very soon in Canada within a few weeks. You will love them.
@ElBuddyChristo
3 жыл бұрын
@@MusicNomadCare I am looking forward to it! Thank you.
@Sanchesus
3 жыл бұрын
Why do you capo the first fret when checking action? Never seen this done like so..
@MusicNomadCare
3 жыл бұрын
In the flow, string height comes before nut height. The measurements we have are based on using the pick capo at the first fret. Since the nut has not been addressed yet you would be using a height reference point that could be off. The first fret is fixed height to adjust from.
@jaezryl
3 жыл бұрын
This is better, usually when not using a capo, after setting the nut height, your initial action might go off.
@wingken1031
2 жыл бұрын
How about 5string bass? It’s the same action height with 4string?thankyou
@MusicNomadCare
2 жыл бұрын
The most common String Action Height for a Low-Medium action on the bass side (or low string) that will make your bass play great would be .090” or 2.25mm on the 5th or 6th string.
@jtbass
Жыл бұрын
@@MusicNomadCareI bought your KISS Setup bundle last year from Sweetwater and it is a fantastic value for the $$! I also have extended range basses. Do you have a full chart available for the different setup options like featured on the string action gauge? I’m interested in the B and C strings for the low through high action. Thank you!
@roberttalbot7200
Жыл бұрын
I'm not seeing how to use the ruler at all. You talked a lot about how it was painstakingly researched etc and then don't show what measurement to use or where to use them. Over head shots lining up the actions would be nice.
@MusicNomadCare
Жыл бұрын
The String Action Gauge, MN602, has instructions on the gauge for how to use the gauge along with suggested string heights for your playing style on electric, acoustic and bass guitars. The gauge also has a conversion chart on it.
@Gnathan96
2 жыл бұрын
I have a bridge with independent saddles, what should I do height wise for the strings in between?
@MusicNomadCare
2 жыл бұрын
You will want to follow the flow for individual adjustable saddles and we give the recommended measurements. www.musicnomadcare.com/How-To-Advice/Setup-Hub/The-Setup-Flow/
@Gnathan96
2 жыл бұрын
@@MusicNomadCare thank you for the comment, I’m still having trouble the link showed me the flow but didn’t have any recommendations. I scrolled through the whole page as well.
@MusicNomadCare
2 жыл бұрын
here is the manual you can download it for free in your language. Make sure you follow the proper flow for your individual adjustable saddles. www.musicnomadcare.com/How-To-Advice/Setup-Hub/Setup-Manual/
@Gnathan96
2 жыл бұрын
@@MusicNomadCare awesome!! I bought the kit and now the guitar plays like a dream!!! Quick question, would this work on a 7 string guitar or even 8 string guitar? I have ones with a 20” radius and for example I have a 6 string bass that the radius tool is not wide enough to measure the 6 strings on my bass. Any tips would be greatly appreciated!
@MusicNomadCare
2 жыл бұрын
Reach out to our guitar tech and he can help give you some recommendations for your specific needs. email him at tech@musicnomad.com
@reening
3 жыл бұрын
3:53 I just have one question, why would we need to use our finger to fret at the first fret? And is it on the fret position itself or directly on top of the fret? Thanks for the video
@MusicNomadCare
3 жыл бұрын
We realize and respect there are many different opinions when it comes to setting up a guitar but in the KEEP IT SIMPLE SETUP flow, string height comes before nut height. The measurements we have are based on using the pick capo or finger at the first fret. Since the nut has not been addressed yet you would be using a height reference point that could be off. The first fret is a fixed height to adjust from. You could fret on the fret itself or right before the fret, you want the string to be pressed down on the 1st fret.
@billn2421
2 жыл бұрын
@@MusicNomadCare If the nut height has been addressed, do we still need to press on the 1st fret?
@erichoward5433
4 жыл бұрын
You didn’t show how to set pickup height with the action gauge tool. That video would be useful.
@MusicNomadCare
4 жыл бұрын
Eric, we will be doing that in another video. We are focusing on String Action in this how-to video.
Пікірлер: 92