Just purchased an interesting Bentima with a Preivale movement today and looking for a bit of info on the brand. I happened upon your video. So very interesting.....I had no idea! I have yet to find a proper key, but when i do, can't wait to try your process. Thank you again!
@adamscott-ukhorology3038
2 жыл бұрын
My pleasure have a great weekend
@RychaardRyder
Жыл бұрын
great video! i had no idea these table top clocks had a little pendulum inside of them, how neat!
@mrp9642
2 жыл бұрын
Great video. Managed to get my recently purchased Perivale mantel clock working. Many thanks. (Just need to sort out the lack of chime now).
@adamscott-ukhorology3038
2 жыл бұрын
Your most welcome
@dougmaz1
4 ай бұрын
The clock I’m repairing has the two screws undone holding the pendulum hanger and has the escapement spindle. Have you got an adjustment video showing how to set it up to make it tick properly. Doug
@bruce_on_the_loose
2 жыл бұрын
Awesome video, got my Smiths clock back ticking after I replaced the suspension spring.
@adamscott-ukhorology3038
2 жыл бұрын
Glad the video helped have a great day
@AntPDC
11 ай бұрын
Thank you Adam. My English 1920's Napoleon chiming mantel doesn't have a "crutch", so the pendulum just runs out of steam after around 20 secs. Pity really, it's a family piece - though not particularly exquisite!
@Soandnb
10 ай бұрын
If all else fails, you can always shim some paper underneath the clock until it's balanced! Still there has to be some way to adjust it.
@DivineSource444
2 жыл бұрын
Thank you so much! Very helpful video. I just go my first antique mantle clock today and can't get the beat stabilized. So frustrating.
@adamscott-ukhorology3038
2 жыл бұрын
Can be tricky I have other set up videos keep trying though you will get there
@dougmaz1
4 ай бұрын
Where can I buy that volume controller you clipped to the workings do it pick up the tick on your phone. Doug in Australia thank you.
@adamscott-ukhorology3038
4 ай бұрын
You can get them of eBay thank you
@AnnabelleBeaudoin
7 ай бұрын
Great video ❤
@malcolmj7670
9 ай бұрын
Did you edit this, I wonder because when you turned it to ten o’clock, it struck 12 times.
@Mars-zgblbl
9 ай бұрын
Thanks for this video - it confirms my guess on how to set my recently purchased Perivale clock in beat. The recoil escapement is sensitive to the position of the adjustable slotted plate for the pallet arbor back pivot, making it tricky to position it correctly. Is there a trick to this, and a target pallet depth in the escape wheel teeth?
@davel831
2 жыл бұрын
Great video , great tutorial many many thanks
@adamscott-ukhorology3038
2 жыл бұрын
My pleasure thank you for the feedback have a great evening warmest regards Adam
@davel831
2 жыл бұрын
@@adamscott-ukhorology3038 Adam thank you 🙏 at last someone I can learn from
@adamscott-ukhorology3038
2 жыл бұрын
@@davel831 your most welcome
@adamscott-ukhorology3038
11 ай бұрын
Thank you for your email, yes the mantel cock has a crutch, sounds like its out of beat to me have a look through my videos to aid you in set up warmest regards Adam
@jrgnc1
9 ай бұрын
Can't see what your pushing on because the strike hammer is in the way,
@fabienlamour3644
8 ай бұрын
You're right. It's not for beginners like me.
@zacstarr107
8 ай бұрын
I wound the clock up and tried this adjustment, but it won’t keep ticking…Any idea why or what I can check?
@zacstarr107
8 ай бұрын
I just adjusted the mounting brackets and now it’s ticking.
@adamscott-ukhorology3038
8 ай бұрын
Could be a lot of different issues I would check for friction on the hands and dial and is the suspension in good order? Warmest regards
@cobesclocks1949
Жыл бұрын
Is this clock made by ben time?
@adamscott-ukhorology3038
Жыл бұрын
No sorry its not
@Claude1100
Жыл бұрын
How do you set the time keeping ? mine gains 4 mins in 24 hours ..
@adamscott-ukhorology3038
Жыл бұрын
All you need to do is lower the bob on the pendulum warmest regards UK Horology
@Claude1100
Жыл бұрын
@@adamscott-ukhorology3038 Hi Adam, thank you so much for a speedy reply, I was mightly impressed with your Ear. I'll unscrew my pendulum weight a couple of turns , it's a 1850ts French slate clock , Merry Xmas to you and your family..
@adamscott-ukhorology3038
Жыл бұрын
@@Claude1100 my pleasure happy Christmas to you as well
Пікірлер: 33