All of these recovery KZitemrs in Utah are so lucky to have you around. All the work you have done from the Golden Nugget to fab rat vehicles to Matt’s vehicles and now really helping Robbie out. You are a wealth of knowledge.
@zyeborm
3 ай бұрын
I want to see the tom toms shop / chads fab crossover. That's a whole bunch of quiet competence in one place. They might need to get Robbie I mean "Chad" in for a bit of spice tho.
@Kevin-ti3rz
3 ай бұрын
I believe everyone (we watch Rory, Robby,Rudy,Paul,Matt,) take there vehicles to Chad for the last bit to make sure it's right and good to go .
@Kevin-ti3rz
3 ай бұрын
Oh and Tom Tom and the Lab guy's. And more I can't remember them all . Old Age ✓
@bigblue1287
3 ай бұрын
I said it before I'll say it again Chad to the rescue! You got a wonderful family Chad. Your boys are a chip off the old block! You got a very cool wife❤
@chadsfab
3 ай бұрын
Thank you!!
@terryreynolds1366
3 ай бұрын
Chad is a wiring champion if you don't like what you see move on if you ride a bike you will crash just get back up and keep going just saying if you work in a shop you can get your finger mashed enjoy watching chad 💪🙏👍
@brettnipps7205
3 ай бұрын
Where would Robby be without the REAL Chad!!!! We know already Thanks Chad well done!!
@pctatc66
3 ай бұрын
Chad swoops in and saves the day. AGAIN! How many times have we seen this! Robby owes you a total restoration that's for sure!
@chadsfab
3 ай бұрын
😂 Robby doesn't owe me, it's just what friends do
@rogerash
3 ай бұрын
That comment sums you up Chad. You would do anything for your Buddies, and I suspect they would do the same to help you. Nice work Chad.
@danrussell3439
3 ай бұрын
Chad your are an amazing person and a friend. To put all your energy into helping Robby , or at this point taking on the whole project show your true heart and character. You are a blessing to watch.
@cubbyboy8
3 ай бұрын
Robbie, Paul, and Matt are lucky to have such a talent in their area. Hope you keep sharing, its looks like great fun for all and fully entertains me! I love to see your projects just as much.
@theothered2549
3 ай бұрын
Chad's Fab deserves a much higher subscriber count than it has, come on folks push the subscribe button.
@thepubliceye
3 ай бұрын
This will be an example of how there is much more to custom builds than just buying the best of everything and putting it together.
@glennbryksaw5731
3 ай бұрын
I really enjoy watching you fix other's mistakes. Your ability to take a virgin calibration and make odd vehicles run is legend. Now it runs, steers, stops and cools. Just awesome.
@papatomsthoughts
3 ай бұрын
Chad is amazing in his wide level of knowledge. Kevin built an amazing engine. Good job guys. 😊😊😊😊😊😊 of course, Stacey keeps em all in order.
@Zipbass
3 ай бұрын
Chad , very methodical and calm , nice to see families working on mechanical stuff.
@taylormade710
3 ай бұрын
Robbys crew did an amazing job to take the rust bucket to running beast in the timeline shared with the public
@chadsfab
3 ай бұрын
Agreed!!!
@kens407
3 ай бұрын
Chad and Staci aren't just this nice on camera to other KZitemrs. They were able to help me with wiring (what else?) for my '66 Plymouth and I was in Minnesota! They treat their "regular person" customers every bit as nice as they do on each other on camera.
@mijour
3 ай бұрын
How many wanted to see Chad do a burnout
@chadsfab
3 ай бұрын
Me 🙋♂️ That's why I didn't drive it, didn't trust I'd have enough self-control not to do one 😂😂
@patrickvannuland5577
3 ай бұрын
I LOVE seeing you involve/teach the youngins!!!!!!
@davidconaway2830
3 ай бұрын
Matt, Robbie and Paul are soooooooooooooo lucky to have you near to make their creations breath fire and work like they're supposed to. Well done Chad and team!
@steven.h0629
3 ай бұрын
The Texas gig was way too aggressive timeline, but this little car will be a really cool toy eventually. @ Kevin, dang man, that motor is a beast! Can't wait to see your Daughters' car! Watched Robby's performance 😐
@billowney8080
3 ай бұрын
The first time you hit the starter, it pops two fuses? Yep, still a Pacer. Wish I'd had Chad around when I owned one.
@RogerSegerJr
3 ай бұрын
That's EXACTLY what I was thinking! My 76 would blow fuses randomly, seemingly for no reason at all!
@dantobin3863
3 ай бұрын
Chad and his family are masters at what they do!!! Especially at being a true friend!
@davidbreaux5989
3 ай бұрын
Great job Chad. Love seeing the young one in ther helping.
@chadsfab
3 ай бұрын
He loves it! No place he'd rather be than in the shop.... especially when it's bed time 😂😂
@davidbreaux5989
3 ай бұрын
@@chadsfab I was the same way at his age. Would rather be in the shop working with dad then sleeping.
@bryduhbikeguy
3 ай бұрын
A neighbor showed me how to work on vehicles when I was 11yo.Had me get my Mom to come out and meet him,He was just 22,and he,brother and Sis moved in.(I'd been watching over the fence every chance I got for the week he'd moved in) She agreed it would be good for me to learn as my brothers had all moved,so I had nobody but a couple friends my age to work on stuff with.(Bikes)1st project,a total motor rebuild on a 360 Plymouth engine,then gears in a 52 Willys trans...
@countrychase3873
3 ай бұрын
You have had your hands on so many of the other guys projects! They know who to call in a pinch.
@RLee-zs1ds
3 ай бұрын
Chad the master of fine tuning. Thanks for an educational experience in tuning.
@saltyreesescup3104
3 ай бұрын
The Young Man Gettin Big Real Quick, Good Job On Switch Duty Brother ! 🤠
@devarskinnee8760
3 ай бұрын
Chad your a great man,and even better father.the same for your family members.delightfull some people!!! Love brother skinner.
@robertr4193
3 ай бұрын
With that engine set up in that old pacer it makes the car look like some kind of alien monster.
@jaybird4095
3 ай бұрын
That pink intake reminds me of an octopus. I think the blow offs (????) need a little work so they look eyes. Love it!
@donanything6816
3 ай бұрын
What a blessing you and your family are to those who ask you for help. All of you working together, your wealth of knowledge and your caring nature meets the responsibility that they entrusted in you to resolve. All the respect in the world to you. May God continue to bless you and those around you.
@steveclark4291
3 ай бұрын
Thank you Chad and crew for getting Robby's Pacer running safely ! Looking forward to seeing it all done up completely !
@garylawson6135
3 ай бұрын
Chad, it's awesome that you're getting involved with other's KZitem projects!
@kstricl
3 ай бұрын
Having watched Rob Dahm learning tuning over the years, just getting this thing remotely drivable so fast is definitely impressive. And you made it steer to boot! Can't wait to see the Boss driving this.
@dougdean3134
2 ай бұрын
Chad to the rescue. You just take it all in and quickly resolve issue by issue in a very calm demeanor. well done!
@ZEVONLIN
3 ай бұрын
My favorite of all the utah youtubers! Very ZEN is Chad's approach. Love it!
@assocrec
3 ай бұрын
Thank God for Chad, the genius in the group. Thanks for the great entertainment and most of all practicing what you preach! Amen brother
@birddog435
3 ай бұрын
Like I said in the last video…. You’re the MVP of all there channels!
@MarkoMygun
3 ай бұрын
Nice job guy's, I'm sure Robby will be very happy and grateful. Can't wait to see the first burnout lol. Thanks for the video guy's can't wait for the next one.
@zacharymorales7159
3 ай бұрын
Great recovery Korbin. Morales Family approved
@coltbuildsit
3 ай бұрын
I still plan to be acquiring your expertise for my Pacer build too! 👍😎👍
@tedtomoyasu8438
3 ай бұрын
Chads Fab to the rescue! You guys are awesome! Robbie actually gets a car that runs, steers, cools, and brakes.
@philipmeyer298
3 ай бұрын
In addition to all that has been said about your skillset, your humility is an example for me to strive to achieve. Thank you Sir!
@mikeroll9868
3 ай бұрын
Chad you are the MAN. It takes a special person to figure out stuff like this. Amazing.
@tughillbillyhomestead
3 ай бұрын
When in doubt, send it to Chad!
@garyidaho1
3 ай бұрын
You do amazing work. Sure smiled at “shaken not stirred” reference to “Bond, James Bond.
@n6st
3 ай бұрын
Quite a heroic effort to fix all the mistakes and get it running. Great job!
@chadsfab
3 ай бұрын
Just a few little things, we all have them with a new build 😉
@saebbi
3 ай бұрын
good job, genuine diagnostics, solid results, god speed!
@kevbev1524
3 ай бұрын
Chad Fabs for the win. ❤😂🎉
@kevinkc3onohelijeepworld953
3 ай бұрын
Once you go Fuel Tech electronics you will never look back at Holley 😬🤔☺️
@Kevin-ti3rz
3 ай бұрын
Its the little thing at the end that most people go insane trying to fix . Chasing the bug's at the end is what Chad does the best ✓
@theburtseoni
3 ай бұрын
It looks like Robby could not quite channel his 'inner Chad' to get the job done without the real Chad! Good job Chad and crew! You saved Robby's bacon!
@patrickvannuland5577
3 ай бұрын
Dood.. You have one heck-of-a-Lady on your side.
@chadsfab
3 ай бұрын
And I know it!
@taylormade710
3 ай бұрын
Chad is the man. My Camaro has electrical gremlins, i wish i lived close to have his team rewire the car
@brettperkins4643
3 ай бұрын
Seems like all the Utah KZitemrs are fantastic people that would lend a hand and thats all the thanks they need. They just enjoy helping and being around each other
@davidfarmer1666
3 ай бұрын
Great job Chad. You didn't just give it a tune, you gave it steering... Robby owes you big time. Now, wake up Hillbilly for a long drive.
@big0trav
3 ай бұрын
It was really cool chatting with you at Rat Finky in Manti this weekend. That car is so sick in person.
@flipzout100
3 ай бұрын
Hearing Chad talking to Korbin, but running through the other boys names reminded me of my grandmother saying mine and my cousin's names, till she got to the right one (we are all J's). Not saying Chad is an old grandma, but just a fond memory.
@Kevin-ti3rz
3 ай бұрын
It was cool to see Kevin . We have seen his work over on Robby's channel . That pink looks really good ✓
@ggalland1
3 ай бұрын
Your an awesome friend! I am sure Robbie was extactic you were able to get it up and running in any capacity! Thank you for sharing and doing what you do
@dljones61
3 ай бұрын
Chad, your a quiet hero saving the day and helping so many with the crazy projects your fellow You tubers get you involved with. And Kevin, this is the second motor I’ve watched go into service. You built Matt’s bombi motor and I cringed watching Matt thrash it on some of those first recovery’s and it held strong. Good Job Guys your both a credit to your craft 👍🏻
@1dave301
3 ай бұрын
The severely jerking steering wheel when the engine first starts usually means the POWER STEERING hoses need to be swapped on the rack.
@chadsfab
3 ай бұрын
Yep, that's what we swapped to get it to work
@brucejr.5833
3 ай бұрын
You did it again my friend! You out class and out mechanic everybody out there. It is a pleasure to watch you work sir.
@DaleA-md2eo
3 ай бұрын
Nooone like you Mr Chad definitely a wizard when it comes to automotive God bless you and your family you all are awesome people
@jodyseaman1885
3 ай бұрын
Chad you are a magician! Good catch on the steering.
@guysonne423
3 ай бұрын
The part I really enjoy of your videos is your knowledge of so many things nice job Chad!
@ITubeTooInc
3 ай бұрын
Thanks for the video. 0:50 The name of Kevin's business in nearby West Jordan, UT is not "Extreme Powder Coating", but "Powder Extreme Coatings".
@davebenson1504
3 ай бұрын
GTREAT Job Chad... you are a REAL problem solver and corrector of others mistakes 🙂
@jaybird4095
3 ай бұрын
Fun to see it come to life! I bet the neighbors loved you that evening :). I have a friend that lives about 3 blocks from me, with a drag car with exhaust that sounds something like that. Most of the neighbors hate it when he fires it up, But is sounds so goooooood :)
@dezfan
3 ай бұрын
The look of terror on your boy’s face was heartbreaking. I really think he thought he was going to hurt you. Thank God neither of you were hurt. Great job as usual. 😎
@rubyredlopez4
3 ай бұрын
Little man makes me nervous when he's with the Gentleman when they are working in the garage! Fantastic work Chad 👍🏽
@chadsfab
3 ай бұрын
Don't be nervous, he's been in the shop his whole life listening and learning.
@bryduhbikeguy
3 ай бұрын
He doesn't touch stuff unless asked,and helps quite allot when he can. He's always asking questions, and Listens when being told how, and why something is being worked on.I was 11 when I started scraping knuckles.He's had all his life to learn how to be Safe
@douglasnsubuga7962
3 ай бұрын
Great teamwork, Chad's FAB and friends.
@duaneayers6117
3 ай бұрын
Great Job Chad and his crew 👍
@AdventuringwiththeS.G.O.C.C
3 ай бұрын
Always makes my day a great day to see a Chad's fab video come up.
@thatdave86
3 ай бұрын
Big effort by Chad ,and the pressure was on Robby and the team to have this car built . Mistakes happened,many hands made lite work but aligning all the different minds takes time . Robby has always said that he is not a wiring guy and he is still learning,that's why he was relying on Chad's experience and expertise to bring it home . There will be many asking why a tight time line and why go through the stress and work to get the car to Texas I would imagine Sponsors requirements and time line,there is a responsibility to the one who pays the bills . But again a timely reminder that Stress should be minimised,the healthy thinking is Vital . Thanks to Robby Layton,thanks Chad's Fab and the Sponsors
@chadsfab
3 ай бұрын
Perfectly said!
@jberg8159
3 ай бұрын
You’re awesome Chad. Very smart and hardworking with top notch character. Keep being you!
@JDEDIGITALMARKETER
3 ай бұрын
I love that sound of that machine. ROCK ON! Great job Chad's Fab. Love yor channel.
@leonardbixler102
3 ай бұрын
Great channel with great content. People are uncaring in their comments. It really is great you involve your family. Keep up the great work.
@xxBlazinBobxx
3 ай бұрын
Sounds mean with the exhaust like that! Looked ready to eat!
@alkennedy1124
3 ай бұрын
The power steering lines are backwards, only , not the rack, thanks BigAl California.
@chadsfab
3 ай бұрын
Correct. Got those swapped
@floydstowe
3 ай бұрын
Awesome video Chad's a great mechanic that LS sounds great
@59vaughn
3 ай бұрын
For turbos to have blower surge...that's freaky cool...
@edwinschlee8374
3 ай бұрын
Sounds awesome now that you got it running!
@jomgelborn
3 ай бұрын
Chad is such a killer mechanic. Always patient and composed.
@Angel-hd2rs
3 ай бұрын
Robby and crew were so stressed by time! Thank you for doing this for Demri and Robby
@ronthompson2366
3 ай бұрын
Alright Chadd you are the man. Nah... everyone pulled together on a truly ambitious project. Nothing that any old hot rodder hasn't dealt with before on a new build. Getting the bugs worked out and the tuning dialed in. But once the show is over and the pressure is off.. final touches and tuning will be done and this PINK BEAST is going to be setting the pace... strap in and hold on ! I still get a kick out of those tiny tires on the back... should be seeing slicks and wheelie bars and tubs in the wheel wells.... Would be really interesting to see what kind of numbers this thing produces. I know they are making it a burnout / drift car... but it would sure be nice to see it going down the 1/4 mile instead. Great video very enjoyable to see as always the family tie and the great collaboration with all of you. You are promoting the right values of friends and family. 😎👍
@WildChinoise
3 ай бұрын
Nice work, debugging the electrical!
@everettdegrasse8478
3 ай бұрын
You have an amazing group of guys who have crazy skills to make things...and make them work!
@Deanna-k4i
3 ай бұрын
Can't wait to see it back in complete racing form Chad you are so cool and have a beautiful family team Sorry did have to laugh when steering wheel took off ❤😊
@chadsfab
3 ай бұрын
Don't be sorry, we all did too....
@Goose_Farquit
3 ай бұрын
Chad and family are awesome people, Kevin is great too but how much does he love an engine he has built!
@garychaiken808
3 ай бұрын
Great job guys. Thank you 😊
@glenludwig5135
3 ай бұрын
Chad you’re amazing. I’m like the others I need you when it comes to wiring and tune ups. Thank for sharing your knowledge
@BG-vq9fd
3 ай бұрын
Kudos for knowing and understanding all the new equipment.
@charleswelch249
3 ай бұрын
You guys do amazing work Chad. You have more talent and experience than most people in doing wiring and computers today for someone who grew up old school with carborators like myself. Love your channel and your family is awesome.
@307Garage
3 ай бұрын
I love the end saying! Good work!
@_Merica_USA
3 ай бұрын
Another Great Video 👍 Great content, keep up the great work!
@cactustweeter2890
3 ай бұрын
Great job Chad! You are the man!!!
@TxRiderDave
3 ай бұрын
The Pacer is as much a beast as expected. It looks like how someone might draw a caricature of a Pacer. No way should Demri drive it without miles of unrestricted space in front. Great job again by Chad and crew.
@christopherquick8606
3 ай бұрын
Chad's Fab Y'all are awesome people. Cheers!
@lalitoojos
3 ай бұрын
It's a true master w nice sense of humor.
@johnnyadams1755
3 ай бұрын
You are truly a gem, Chad. You are blessed with a good family and a great circle of friends (maybe too many friends 😂)
@jeremyjoyce8637
3 ай бұрын
Love the fact that it sounds like a derby car!👍
@darrensarson1509
3 ай бұрын
Chad is amazing and so cool under pressure for getting that monster alive hope roby has a great time in it
@vawahoo03
3 ай бұрын
You guys are good and talented people. Thanks for sharing your journey.
@trappedinkalifornee
3 ай бұрын
chad for the win......AS USUAL......you work miracles with both cars and life....thanks!👍👍
Пікірлер: 478