by a mile the best etek 5 video on you tube...thanks for uploading.
@glennwilson2236
9 жыл бұрын
I just subbed. Great videos man!
@derbaronfpv2354
9 жыл бұрын
hi nice video !! I tuned my trigger maybe you wanna try it ^^ i put a little tape and then a little bit hot clue on both sides of the trigger mount to get a nice trigger sound and feeling. you can press with a wet finger the glue in place only a little bit that you rubber grib can go nice on that you doesnt notice its there^^ i also glue a 0,5 cm piece of rubber inside the trigger where the it pull the microswich to get a longer distance between trigger and frame while shooting because my large hands :D i also got a better triggerposition then i glued a little rubber band on the frame where the triggerpullscrew hit on . but wait for the hot glue to cool down befor first time trigger using now it feels like a geo and not a cheap plastik toy gun :D
@JustCantGetRight
9 жыл бұрын
Bärtiger Baron I'm actually going to to the violent series trigger soon to see what everyone who has one says I'm missing out on haha.
@lucasalani139
7 жыл бұрын
Which is better? A stronger pull or a weaker pull? @madman paintball
@billynoresco6370
5 жыл бұрын
I think you need more subs.
@CarterMalmquist
6 жыл бұрын
So adjusting the dwell adjust the velocity?
@bryancooper98
8 жыл бұрын
what were ur settings at when u did the last shooting in the vid? also, would this way of tuning a gun work for any etek? wanted to tune my etek 2 as well as my 5
@JustCantGetRight
8 жыл бұрын
+bryancooper98 This will work on any Etek, yes (and really any poppet valve with an LPR). Tuning it won't change smoothness (what your hands feel) too much though, it will only change the shot quality and softness of it (what happens with the paint or actual shot). With this you can improve consistency and shoot softer paint but the changes of how the shot will feel in your hands will only vary slightly unless you go from one extreme to the other. As of how to tune them, I would go to the factory settings first and if I want to be softer on paint I'll lower the LPR a little bit and chrono, if it gets a little jumpy in velocity raise the dwell until you shoot consistently again. Keep repeating the process until your gun doesn't shoot well and you can't go further. Then do the opposite, raise your LPR until it starts shooting well again. After that, start lowering the dwell until it gets inconsistent on the chrono, then bring the dwell back up to the point where it's consistent again (this way you use just enough air to operate the gun and you won't waste any of it). THAT is as soft of a shot you'll get while keeping the consistent shot quality; it will be a slower operation so it might "kick" less and it will be more gentile on paint. If you have anything lower than a cure 3 bolt on your Etek 2, you'll be surprised as to how much better this performs even with tournament grade paint. Hopefully this makes your time on the field more enjoyable! Good luck!
@Dirtymaxxx88
8 жыл бұрын
Hey was just wondering if it was a Etek 5 thing or Etek in general thing, I just purchased a Titan Etek 5 took it it out today and was using mid grade paint and freak back with proper bore insert and it seemed like the balls where lobbing alot,like a rainbow shot? Any advice or tips to try and fix this would be great. I've been using the Etha for the past few months and decided to go to the Etek 5.
@JustCantGetRight
8 жыл бұрын
You'll notice a very odd skewing shot if you're doing an extreme under-bore so it wouldn't be a bad idea to check you're not under-boring by too much. As far as the "dive shot" people have talked about and that you're noticing it's an optical illusion. I know I talked about it in my etek vs gtek video but I was wrong, as you can see later in that video, the Etek was averaging at 10fps less than the gtek and that pretty much explains the lob you see there. If you align your etek and your etha asa to asa, you'll notice the barrel will sit higher on the Etek. This means that it will sit higher on your line of sight when you're shooting it, making you notice gravity's effect on the balls more. This is nothing to worry about, you'll be able to get used to it. Also don't worry too much about it screwing with your aim with other guns, I didn't notice it happening to me and I would often try out other guns. Hope this helped!
@Dirtymaxxx88
8 жыл бұрын
Thank you for the reply.
@glennwilson2236
9 жыл бұрын
Do you run any other paintball markers?
@JustCantGetRight
9 жыл бұрын
Glenn Wilson I currently only own the etek 5, but as far as guns I play with pretty much anything I can get my hands on.
@based_moses6266
7 жыл бұрын
make an axe pro review!!! @madman paintball
@420redpandaproductionsllc2
7 жыл бұрын
just at leave it at factory, the more cases you put through it the 'smoother' it should run. otherwise just get an lv1 or an ego11 if you really wanna mess with settings.
@JustCantGetRight
7 жыл бұрын
I can definitely see where you're coming from, since 999/1000 times the factory setting will work perfectly. This doesn't mean however that you shouldn't explore out of it. GEOs have the SFR because it serves a practical purpose, this video shows how to bring that into the ETEK 5 with the same practical purpose.
@420redpandaproductionsllc2
7 жыл бұрын
true
@FernellyMrFerns
6 жыл бұрын
The Madman loco cuando llegue la mia tu me va ayduar a settiar la mia... y voy pa santo domingo pronto y quiero jugar aya.
@Floodbait_117
7 жыл бұрын
how I get the most out of my etek is I don't have etek I have an lv1 good video even if you have a lv1 look the look of the etek tho
@JustCantGetRight
7 жыл бұрын
It's very similar but the solenoid is completely different. The LV1 'noid is much faster, so you can get much lower dwell times. Also, the LV1 solenoid lets you restrict the venting to slow down the rammer so you can play with that.
@RealMCNG
9 жыл бұрын
DPE1
@sethkallenberger7335
8 жыл бұрын
hey, we're you born in the Dominican Republic or did u move there or what?
@JustCantGetRight
8 жыл бұрын
+Seth Kallenberger I was born and raised here (DR) but I also attended an American school from age 3 to 18. I've also visited the states dozens of times and I love it too so I feel cultural identity with both countries. I hope that clears up any confusion you may have, lol.
@sethkallenberger7335
8 жыл бұрын
Oh that's awesome man! Just wondering lol😂
@w333lt
4 жыл бұрын
Does anyone not like a long, loose pull?
@joshuareynolds9163
3 жыл бұрын
Mines gotta be short and snappy, just a personal preference tho. Long loose pulls make my fingers feel slow for some reason
@wickedfanatic2713
8 жыл бұрын
Come play in chicago some time I would love to give you some game time (I can get discounts as a ref at CPX)
@JustCantGetRight
8 жыл бұрын
I've been wishing to play at LL for quite a while now! Sorry I missed your comment, KZitem doesn't notify me of all the ones that come in anymore.
Пікірлер: 29