The football on a stick at the dollar tree works well on the turners to hold cups just remove the stick it comes with and insert the turner handle
@raeanparker4416
4 жыл бұрын
Thanks for this video! I’ve done several of these and love it! So glad someone else is doing them too. I didn’t know about the brush application for glitter, that looks awesome for a whispy look! So glad we have non toxic options to put on plastic cups!!
@LOVEsmeralda
4 жыл бұрын
I am new at this whole thing and have never tried brute tone, have you used it in all kinds of plastic cups?
@janetwatkins8807
4 жыл бұрын
Love the brush technique with apply glitter! I will have to give it a try!
@AlisonCrafts
4 жыл бұрын
It's a nice way to keep your hands clean too :)
@paperbagpanda7277
4 жыл бұрын
Also love the brush method.
@jessicapeterson8311
4 жыл бұрын
thank you for the video, I'v been wanting to make these as well! glad I found your tutorial!
@blueberryfrog894
4 жыл бұрын
I was just thinking about how to do this!
@CopperHueCollectionsChippewa
3 жыл бұрын
I don’t have the heart to sell the Starbucks cups because they have a copyright and it’s illegal. Thank you for showing this method because I was considering it for my tumblers.
@AlisonCrafts
3 жыл бұрын
yeah, I don't sell the starbucks cups
@paperbagpanda7277
4 жыл бұрын
Thank you sooooo much for tellimg us about he cup durability. Not one person makimg videos on here that I've seen has talked about it and it's seriously fustrating. Thank you I'm subbing to you becasue i love transparency. It just really shows that you're really here to help. :)
@claudiacorona3921
3 жыл бұрын
How many layers did u end up using after glitter
@glennanelson8838
4 жыл бұрын
I have wanted to do this so thank you!?!?
@irism6865
2 жыл бұрын
Is the brite tone glossy as the epoxy? I have some vinal stickers on my tumbler and I know with time they start to peel off. I wanted to cover them with epoxy. Just wondering if the brite tone will work as the epoxy. Thank you
@marilynkwitowski3381
4 жыл бұрын
Could you do the same thing with a clear double walled acrylic tumbler? I don’t know if you’d have to sand the acrylic, but would be afraid you’d see the scratches.
@AlisonCrafts
4 жыл бұрын
I give my acrylic ones a very light sand with 400 grit paper! If you use 120 or 220 you can see the scratches!
@roseramos2999
2 жыл бұрын
How do you add glitter to the cold cup lid and how do you seal?
@VeronicaGarcia-nj6vp
3 жыл бұрын
I really like it still looks matte. Did you use the matte Brite Tone to give it that matte look? If you use only vinyl would you sand after 3-4 coats?
@stephaniemodelowitz3829
4 жыл бұрын
If I wanted to add vinyl, would I add the vinyl before or after the whole glitter application? Thank you so much for the tutorial! Love the makeup brush application!
@AlisonCrafts
4 жыл бұрын
You can do whichever but you'll use less layers overall if you lay the vinyl first!
@stephaniemodelowitz3829
4 жыл бұрын
Alison Crafts ah ok, I see. thank you!!
@85patriciaj
3 жыл бұрын
When do you sand with the 400 grit? After the first application or after the 4th or 5th? After sanding do you apply another coat of BT? Also what do you seal with and when should you seal it? After the first layer of glitter?
@AlisonCrafts
3 жыл бұрын
Sand with 400 grit to prep and after every 4 coats of brite tone. You will likely sand a few times. You will want 2-3 coats of BT after your last sand to make sure it's nice and shiny.
@ilianatavarez7861
4 жыл бұрын
Great video and tutorial. Question do you do anything special to keep the top rim clean. Or do you fill in the ridge of the cup with epoxy.
@AlisonCrafts
4 жыл бұрын
I don't use epoxy, I'm using crystalac brite tone. I just bring it up to the edge and don't touch the rim.
@XoLexLayla
4 жыл бұрын
Love the video!! You make it look so easy! Where did you get your spinner?
@AlisonCrafts
4 жыл бұрын
This one was a DIY!
@aprilmpena09
4 жыл бұрын
So i have not tried this or epoxy. I've been to scared from all of the things I see on the fb page I follow about how you need to have full protection and what not. So I have been hesitant! Until I came across this video (and a couple of others) using this Brite Tone! So it is safe and you do not need to have any protection and what not to do this? Correct!?
@AlisonCrafts
4 жыл бұрын
Totally safe! No ppe needed 😊 it's non toxic and non hazardous. No dangerous fumes. You just need to wear a basic mask while sanding or if you choose to spray on the product.
@aprilmpena09
4 жыл бұрын
Thank you!!!!!!🥰🥰🥰🥰
@ieshakieser7439
4 жыл бұрын
Can I use an adhesive spray to attach the glitter first (like loctite), then seal it with E6000 or something similar and then use britetone?
@AlisonCrafts
4 жыл бұрын
You can use loctite, you just need to let it dry 24-48 hours before you add Crystalac products!
@corinboswell8342
4 жыл бұрын
Curious about the condensation you get on cups like this. Since this is a water based product, does it affect the cup long term?
@AlisonCrafts
4 жыл бұрын
Once it's cured Crystalac is water resistent so that's a non issue! As long as it's cured before you use it, you shouldn't have a problem. I use mine daily with ice water and it's holding up perfectly! I do set it on a paper towel to help not get water all over my counter 😂💯
@corinboswell8342
4 жыл бұрын
@@AlisonCrafts Thank you for that info! If there are only a few layers on the cup, how long would you say it takes to fully cure?
@lindadelossantos3557
3 жыл бұрын
Do you have to have a turner for it to level it self?
@jociimarie91
2 жыл бұрын
Hi!! Would I be able to add color to the brite tone? If so how do I go about that?
@AlisonCrafts
2 жыл бұрын
The crystalac pigments are awesome thecrystalacstore.com/collections/craftnique-products-all/products/craftnique-color-boutique-diy-concentrated-pigments?sca_ref=301559.RjXXsfrXmN
@madisonserrato4774
4 жыл бұрын
Hello so cute! do I need to do this if im just using regular vinyl on these cups? Thank you!
@AlisonCrafts
4 жыл бұрын
Nope, permanent vinyl should be fine as is. It doesn't hurt to apply a little heat to it though! Like just run your hair dryer over it quickly 😊
@madisonserrato4774
4 жыл бұрын
Alison Crafts thank you! Appreciate your response definitely subscribing ❤️
@anyaparry6653
4 жыл бұрын
I found that vinyl decals that have super pointy corners lift, even if prepped. How many layers of this would I need to use over vinyl to prevent that?
@AlisonCrafts
4 жыл бұрын
@@anyaparry6653 try waiting overnight before you coat the vinyl to try and give it some time to cure. You can also try hitting it lightly with some heat to get it to stick a little better. Also make sure your design isn't too big for the space
@vagabonddeesadventures8491
4 жыл бұрын
Great video. How many coats are needed after a decal is added. And what do cups like this sell for?
@AlisonCrafts
4 жыл бұрын
thank you! Coats depend on the type of decal. Could be 3 coats or could be 8 coats. Just keep going until it's fully smooth! Or you can just do a few layers to get some extra protection and don't care if you can feel the vinyl or not! Price to sell really depends on the design too as well as your area! I personally would sell around $25.
@blkbrn1952
3 жыл бұрын
Could you use this to cover vinyl on tumblers? Beginner here, that may be a crazy thing to ask, just made a water bottle for my daughter and I am wondering if I should seal it. I was told Mod Podge would streak and sometimes bubble and come off.
@AlisonCrafts
3 жыл бұрын
It honestly depends. You shouldn't need to seal permanent vinyl! If it's properly prepped you can add Brite Tone!
@ariereed5807
4 жыл бұрын
As of now has it lasted with hand washing?
@AlisonCrafts
4 жыл бұрын
It sure has!
@MeliandAngel
4 жыл бұрын
This is not to us for a si game layered cup right?
@reannal4334
3 жыл бұрын
It isn’t toxic? Does the chemicals seep through the plastic into the cup?
@AlisonCrafts
3 жыл бұрын
CrystaLac Brite Tone is NOT toxic and cures by evaporation, there is no chemical reaction happening with the plastic.
@dianaloredo6404
4 жыл бұрын
Hi!! Can I use brite tone on a color changing cup?
@AlisonCrafts
4 жыл бұрын
yes!
@miryamdelatorre3431
3 жыл бұрын
What is the difference between crystalac and Brite tone? Or is it the same thing? Sorry have watched a few videos and still unsure which I need
@AlisonCrafts
3 жыл бұрын
Crystalac is the name of the company! The product they make that you want is Brite Tone!
@miryamdelatorre3431
3 жыл бұрын
Got it! I feel like I’ve heard a couple different products mentioned and didn’t know the difference. The protector is something else right? What is the different or in what case would u use the protector rather than the brite tone
@tiffanybrown003
3 жыл бұрын
And this is safe to drink out of after cured? Versus using epoxy ?
@AlisonCrafts
3 жыл бұрын
yep!
@sandramendez4080
4 жыл бұрын
Hi, have a question if I want to add vinyl to my cup and glitter just how you did in the video. Would I need to add all my vinyl and then start adding britetone or do I apply it after applying some layers of britetone and the glitter?
@AlisonCrafts
4 жыл бұрын
You can do whatever but if you apply it first you will use less layers to cover it up
@margaretsierra6867
3 жыл бұрын
Hi Alison 👋 hey I have a question I bought some cups I bought from a crafter and they have vinyl on them but the corners of some of the letters becoming unstuck can I seal with bright tone or what should I use?
@AlisonCrafts
3 жыл бұрын
you need the cup to be prepped before you can use BT so if you could sand around the vinyl you could try! But it may be better to just use some glue.
@alliealba8806
4 жыл бұрын
My vinyl is peeling from my tumblers, how can I get it to stop peeling
@cassandradelarosa2531
4 жыл бұрын
Wiping down the cup or tumbler with alcohol before apply helps. Also the type of vinyl. Try using Permanent Vinyl. That’s worked for me.
@mayita5641
4 жыл бұрын
have u applied britetone ?
@momonro2010
4 жыл бұрын
What finish are you using here? Also why’s the best way to put this in a bottle like the one you showed? I’ve been wanting to try another method other than epoxy that was safer!
@AlisonCrafts
4 жыл бұрын
I use Crystalac! And I jsut pour it into the little bottles using a funnel! I just made a video series outlining what Crystalac is if you are interested in more details 💕 kzitem.info/door/PLY1xNd7MWi5uFiF5p6TwwfX7r-rbpcHLn
@lvf_craftique3326
4 жыл бұрын
Your videos are amazing. My question is on average how many coats of Brite tone does it take after the glitter coat? 3?
@AlisonCrafts
4 жыл бұрын
Aww, thank you! you're so sweet! I would say after glitter it takes about 5-6 coats of BT. But that really depends on if you sealed and flattened. or if you use chunky it could be more.
@BSECUPS
4 жыл бұрын
I did eight coats on mine and it’s peeling off from the bottom :(
@AlisonCrafts
4 жыл бұрын
@@BSECUPS did you sand first?
@eidysoza3973
3 жыл бұрын
Hi if I’m just apply waterslide or printable vinyl no glitter will the brite tone hold will the decal stay on the cup?
@AlisonCrafts
3 жыл бұрын
yes. i would do a few coats of brite tone before you add your decal, then a few more over the top. Sand the cup first!
@gmorales8411
4 жыл бұрын
thank you for your video! can I use the write tone on mugs?
@AlisonCrafts
4 жыл бұрын
yes!
@Sandy-vp3mn
3 жыл бұрын
Is it safe to use Brite tone on all types of plastic drink bottles?
@AlisonCrafts
3 жыл бұрын
yes
@citlaligonzalez4794
3 жыл бұрын
Hello quick question do i apply vinyl and then britetone or briteton first, add vinyl, and the britetone agin?
@AlisonCrafts
3 жыл бұрын
You can honestly do either but I do vinyl first
@clarissamarie6819
3 жыл бұрын
What did you use for the beginning so u can put the glitter? Also what did u use at the end so it can hold?
@AlisonCrafts
3 жыл бұрын
I use Crystalac Brite Tone to add my glitter and to seal it ❤️ thecrystalacstore.com/collections/clear-top-coats/products/brite-tone-instrument-finish?sca_ref=301559.RjXXsfrXmN
@dafabulus1694
4 жыл бұрын
If I remember correctly the cup is matte, right? After you apply all the coats will it still maintain the texture?
@AlisonCrafts
4 жыл бұрын
the cup will have a smooth shiny finish with brite tone. You could buy the brite tone in the matte finish if you wanted that!
@gisselbarraza8676
3 жыл бұрын
My brite tone peeled off my entire cup and was easy scratched off , do you know why ?
@AlisonCrafts
3 жыл бұрын
Did you prep?
@gisselbarraza8676
3 жыл бұрын
@@AlisonCrafts I just wiped down the cup with alcohol
@theextrovertedintrovert_am
4 жыл бұрын
By adding the brite tone after applying the glitter, is that not sealing it. Say you had added vinyl and glitter at the same time and 'seal' it 3-4 times after with brite tone will it be wash proof?
@AlisonCrafts
4 жыл бұрын
It is sealing it for sure. If you have a decal and glitter, you will just use however many layers you need to get it covered.. Usually like 5-6! Then it can be handwashed after you let it cure for 5 ish days.
@theextrovertedintrovert_am
4 жыл бұрын
@@AlisonCrafts very helpful. Thanks
@anadelapaz634
3 жыл бұрын
Is it normal to leave scratches when you sand? Does that go away when you add the next coat?
@AlisonCrafts
3 жыл бұрын
should be more of scuff marks, not scratches. make sure you're using 400 grit and they will go away. but if they're actual scratches they might not.
@stephanieguzman5721
4 жыл бұрын
what do you use to seal your cup ? Using crystalac brite tone do you recommend to do it outside for safety reason or inside room it fine with no protection ?
@AlisonCrafts
4 жыл бұрын
I use Crystalac Brite Tone and it is safe for indoor use. You only need a mask if you're spraying it or sanding!
@samlovece
4 жыл бұрын
Instead of glitter, how would this process work using sticker paper or printable vinyl?
@AlisonCrafts
4 жыл бұрын
You can do whatever you want! I would personally probably do permanent vinyl but if you do printable or sticker paper, just seal with clear spray paint and then you can coat with Brite Tone to seal the cup.
@janefuehrer
4 жыл бұрын
Do you have to sand ? My BT won’t stay over the logo.
@AlisonCrafts
4 жыл бұрын
yes you have to sand, your bt will peal up if you don't sand! Did you sand over the logo at all?
@ady22us
3 жыл бұрын
Wouldn't it ruin the Starbucks cup if you sand? I didn't sand my cup but after the send layer of BT it covered. Do I have to redo it again?🤦♀️
@tkfoster3718
4 жыл бұрын
How long does it take to cure with the crystalac?
@AlisonCrafts
4 жыл бұрын
It can take up to 30 days to fully cure but it is 100% okay to start using after about 5 days :)
@celinacruz1247
4 жыл бұрын
If you had sealed it, when and how would you have done this step?
@AlisonCrafts
4 жыл бұрын
Sealed it with E6000? After I get my glitter on there, I'd spray it after 4 hours and let the e6000 dry completely before sealing it up with BT again!
@mrgutierrez7111990
4 жыл бұрын
What’s the best way to get rid of air bubbles ?
@AlisonCrafts
4 жыл бұрын
Be careful when you add the BT, light strokes, not to much pressure. Only use a very little bit. just enough to get it coated - the bubbles will pop on their own as long as you don't put it on too thick!
@eeeejay1000
4 жыл бұрын
Hi there, does Crystalac chip on starbucks cups over time? I did a cup about two months ago and now the top has chipped. I did about 4 coats. Any help is much appreciated!
@AlisonCrafts
4 жыл бұрын
Did you sand before you applied it? Mine are a holding up!
@eeeejay1000
4 жыл бұрын
Alison Crafts no I did not sand :( thank you for your help
@lilwl19701970
3 жыл бұрын
I just got it I did two cups and lots of bubbles how do you not get bubbles
@AlisonCrafts
3 жыл бұрын
Your layers are probably too thick and you may be over working the product
@edithvelasquez497
4 жыл бұрын
Have you ran this through the dishwasher? I want to switch over from epoxy but curious as to how well crystalac actually holds up
@AlisonCrafts
4 жыл бұрын
No, definitely doesn't hold up in the dishwasher!
@LalaLunaticcc
4 жыл бұрын
@@AlisonCrafts What happens to it in the dishwasher?
@ambersolorzano7102
4 жыл бұрын
Okay so I’m new to this and I’ve been people use epoxy and some use your method what’s the difference ? Thank u!
@AlisonCrafts
4 жыл бұрын
So i use Crystalac producs instead of epoxy because it's water-based and completely non-toxic which makes it sooo much safer! I have more information in these videos: kzitem.info/news/bejne/o5yey4xukXWFgHo
@ambersolorzano7102
4 жыл бұрын
Alison Crafts thank you sooo much I’ll be watching 💖
@jesstoomer8806
3 жыл бұрын
@@AlisonCrafts so you don’t have to wear a mask w this like you would w epoxy?
@LisaMM830
4 жыл бұрын
I can never get my BT to last that long, it dries so fast. I guess i'm not putting enough for glitter application?
@AlisonCrafts
4 жыл бұрын
try using a little bit more! I use a little more than i would use for a regular layer
@kfranklin9684
4 жыл бұрын
Do you put more on after you apply the vinyl decal?
@AlisonCrafts
4 жыл бұрын
That's optional! If you want to fully cover your vinyl so you can't feel it, go for it!
@ericalopez2757
4 жыл бұрын
Hello , do you leave the spinner on the whole time ? During the 4 hours you let it dry is it spinning or u turn it off?
@AlisonCrafts
4 жыл бұрын
It only needs to spin for like an hour so you can turn it off. You need to wait 4 hours before you coat again though so it's fine if you don't turn it off
@ericalopez2757
4 жыл бұрын
Thank you
@monicaavila8483
3 жыл бұрын
Do I have to sandpaper if it just a glitter all over cup ?
@AlisonCrafts
3 жыл бұрын
Yes. You need to sand every 4 coats
@milagrosarango5614
4 жыл бұрын
Just a quick question what if I just want to put vinyl can I do that and use bright tone?
@arelitorres9381
4 жыл бұрын
I also want to know this, I did a Starbucks cup with just Vinyl and added brite tone but a few days after it all peeled off when I accidentally jammed my nail on it and it made like a bubble so I had to remove all of it completely and I’m not sure if I did something wrong or just woke with glitter?
@vanessabarbes1181
4 жыл бұрын
Hello! I use brite tone to seal all my cups. I keep my cup spinning for four hours, then I reapply. It’s worked very well for me.
@xiomaramceachen7513
3 жыл бұрын
@@arelitorres9381 this happen to me too. Not sure what I did wrong
@whitneybrown3125
4 жыл бұрын
Hi! Can this be done to a metal tumbler?
@AlisonCrafts
4 жыл бұрын
Definitely! Just sand, wash and base coat it first!
@rubisanchez1736
4 жыл бұрын
Hi this is such a beautiful cup and helpful video. I have two LV cups with hyphograpghic vinyl . Can I just spat them with Acrickly
@AlisonCrafts
4 жыл бұрын
Spray? Can you give me more details on what you plan to spray with
@rubisanchez1736
4 жыл бұрын
@@AlisonCrafts ys sorry the one I bought is called Acrylic sealer Gloss finish by Aleene's original
@sharonescurra581
3 жыл бұрын
I did this but by second coat a chunk of glitter came off I was using the fine glitter what did I do wrong
@AlisonCrafts
3 жыл бұрын
did you seal your glitter? you can seal it with e6000 pump spray or clear spray paint to hold it in its place. You can always add more glitter too.
@sharonescurra581
3 жыл бұрын
Alison Crafts yes I did after watching your video again I realized you have it in text to seal with E6000 so I immediately did and it worked 🤗. Another question should I keep doing coats I only put glitter at the bottom but did 4 coats it’s soft but not smooth I guess it depends on what I like but I was to scared to keep adding coats I feel like it will peel
@AlisonCrafts
3 жыл бұрын
@@sharonescurra581 do about 5 coats, then do a light sand over the glitter with 400 grit sand paper, then add a few more coats
@charitzascreations
3 жыл бұрын
How would you know what cups are rigid? I have some but idk 🤔😂
@AlisonCrafts
3 жыл бұрын
can you squeeze them and they bend? you want the to not bend or bend very minimally.
@charitzascreations
3 жыл бұрын
@@AlisonCrafts they don’t bend of Im holding them like a normal person but if I really squeeze them the bend some 😂
@sonialeon4981
3 жыл бұрын
How can you glitter the lid? I mean to spin it?
@AlisonCrafts
3 жыл бұрын
you wouldn't spin the lid, just do it right on a flat surface. Like an acrylic blank.
@sonialeon4981
3 жыл бұрын
Thank you Allison!
@beeuniqueballoons
4 жыл бұрын
Do you have to wait a certain amount of time after sealing before using another coat of bright tone?
@AlisonCrafts
4 жыл бұрын
4 hours!
@beeuniqueballoons
4 жыл бұрын
Alison Crafts one last question, sorry I’m new to all of this. Can alcohol inks be dropped on top of the universal white while wet?
@AlisonCrafts
4 жыл бұрын
Unfortunately no, they can't. You can use alcohol inks on top of it like for a wood grain or saran wrap type tumbler. You can mix in bombay inks or the pigments they sell!
@Alyssawheeler
4 жыл бұрын
How long does the product have to “cure” Belford being safe to drink out of?
@AlisonCrafts
4 жыл бұрын
If I'm giving it to someone, I wait 4-5 days to send it. If it's mine, I use it after a couple days.
@Alyssawheeler
4 жыл бұрын
Alison Crafts so I have 2 question, when I’ve been apply this to my cups it seems to separate on the logo part and only on that part.. what am I doing wrong? Second question- I got told by some people that this was not safe to use because how thin the cups are.. is that true?
@cassandradelarosa2531
4 жыл бұрын
CrystaLac is a water based product. So it does not react with the plastic on the Starbucks cup. As far as I know it safe to use. Much better than epoxy.
@AlisonCrafts
4 жыл бұрын
@@Alyssawheeler totally safe! And you could try a very light sand with 400 or 600 grit paper over the logo to see if that helps!
@Alyssawheeler
4 жыл бұрын
Alison Crafts thank you so much!
@betteboop57
4 жыл бұрын
PLEASE tell me how you made your turner? Thanks!
@esthersanchez1220
3 жыл бұрын
Do you sand the cup before?
@AlisonCrafts
3 жыл бұрын
yes! Prepping is very important!
@cutelaqui
3 жыл бұрын
No need to sand?
@AlisonCrafts
3 жыл бұрын
Definitely need to sand
@craftlux4196
4 жыл бұрын
When I coat with Brite tone, why does it dry streaky?
@AlisonCrafts
4 жыл бұрын
Could be that you're using too much or too little. I'd say about 1.5 mls for this cup!
@luckeycharm04
4 жыл бұрын
Heyyyy! Where do you buy your Starbucks cups from?
@AlisonCrafts
4 жыл бұрын
Starbucks!
@AlisonCrafts
4 жыл бұрын
From Starbucks!
@krystynecurtis7395
3 жыл бұрын
Are these the same cups we get when we order drinks? What specifically do we ask when we want to buy them? Sorry if I seem stupid
@yeseniareyes538
4 жыл бұрын
When you are completely finish with the Brite tone how long does it take to fully cure? Or when can you start using the cup? Ty!
@AlisonCrafts
4 жыл бұрын
I wait 5 days before use. It can continue to harden for up to 30 days so it's best to be careful with it until that time has passed.
@lynn2622
4 жыл бұрын
How do you prep your cup?
@AlisonCrafts
4 жыл бұрын
I did nothing to this cup! But you could give it a light sand with a high grit sand paper if you want. I just didn't because I didn't want to take off any of the Starbucks stuff.
@christineanderson4828
4 жыл бұрын
How did you prep this cup?
@AlisonCrafts
4 жыл бұрын
I sand with 400 grit sand paper. Here is a video with the prep process! kzitem.info/news/bejne/ratqv5mZq4uKdWk
@jogarcia9574
4 жыл бұрын
What’s your Instagram?
@AlisonCrafts
4 жыл бұрын
Www.instagram.com/Alison.crafts_
@amandatorres661
4 жыл бұрын
can i vinyl first or only after a couple coats?
@AlisonCrafts
4 жыл бұрын
you can vinyl first!
@CynTica
4 жыл бұрын
which crystalac products are you using. i see there are two that say bright tone. it might be the same product but the labels look a tad different. want to make sure i’m using the correct one. thanks
@AlisonCrafts
4 жыл бұрын
Yes, I'm using Brite Tone! thecrystalacstore.com/collections/clear-top-coats/products/brite-tone-instrument-finish?sca_ref=301559.RjXXsfrXmN
@vianeymoreno2909
4 жыл бұрын
how long do you wait until you can use it?
@AlisonCrafts
4 жыл бұрын
About 5 days!
@Jade-om1fg
4 жыл бұрын
Alison Crafts Alison what’s the name for the coat ?
@AlisonCrafts
4 жыл бұрын
@@Jade-om1fg I use Brite Tone!
@anitaadlp
3 жыл бұрын
Can I add vinyl first or does the glitter go first?
Пікірлер: 184