I like how the comp doesn't make the light stick out as much, very cool
@nobodytraining
2 ай бұрын
It does look “correct” in my eyes as well
@five-oonsene545
2 ай бұрын
JG and I had the same conversation about the new trigger 6 months ago. My feedback to him was that it feels like you are trying to press against a hacksaw blade with the checkering on the safety and the over powered spring. I ground off and polished the safety and reduced the spring pressure which turned the trigger into a more pleasurable shooting experience. Of course then I had to do it for everyone else on my shooting team. I don't know why he has not addressed that yet. I just finished a Glock very similar to yours but using the Harrington comp and I totally agree with you that it makes shooting A LOT more enjoyable than without. Tango Down also makes a slide release that is worth looking at for these guns if you get a chance. Another fine video and was truly enjoyable. Please keep them coming. Looking forward to the Chi-Com .45 finish also.
@nobodytraining
2 ай бұрын
The texture on the 4311 shoe is nice, just enough to know it’s there. But yes, that safety has too much spring. I did notice that if I took my finger, without gripping, if that makes sense, and pushed the safety and trigger back that the safety would clear. It was only when I gripped the pistol and then pulled that it wouldn’t. But I noticed that my finger was also contacting the shoe at the same time as the safety so it didn’t have time to clear. Regardless, less spring is the answer. I was really looking at the HA comp but they seemed to be out when I was ordering stuff. But I’m glad I found the PMM because it really is nice and finished the pistol off really well. I’ll look at Tango. Always good to have a myriad of parts in mind for potential projects. The Norc will be a few vids down the line most likely while it’s waiting for its special thing to happen. Once it happens it will come back with a vengeance. 🤔 pretty sure I have a 10/22 that’s been waiting
@barrygoodson4952
2 ай бұрын
While I understand some people have had problems with Shield mags I have two Gen 2 Shield with over 3k each and I have had one stovepipe in over 3k rounds in each mag. I think it's the tolerances in both the Glock and the magazines that cause issues. I've seen a-lot of people like me who really haven't had a issue to speak of. Buy the latest version and you shouldn't have a issue. I like the fact they drop free really easy compared to stock magazines .
@chriswhorror6658
24 күн бұрын
Love it. Thank you. Been wanting to do the same with my Glock 43x. A lot of people under estimate the 43x. With the right upgrades it would be rocking reliable 43x
@nobodytraining
24 күн бұрын
You bet! I was surprised how the comp made it feel like a much larger pistol. Have fun with your project!
@Glock_Doc
Күн бұрын
Fellas, the G43X is basically Glock’s mini G19. Especially with your 15 round mags! I am not exaggerating here, more than 6500 rounds in my 43x and i field strip and basic clean every 1500 rounds, probably more than needed. She will just eat everything all day. My life and my loved ones’ depend on my edc 43x errrrrrry dayyyyyyyyy. ❤
@Glock_Doc
Күн бұрын
💯 get those PSA Dagger 15 round mags if you can. No issues, no mag release change. Just more rounds. LFG.
@scottydoo919
2 ай бұрын
That’s insane. Pretty awesome trigger. I’d probably dremel the inside the trigger guard to remedy the drag. Great video
6 күн бұрын
I built the same setup lolz I put G19 mag springs and followers in my gen 2 SA mags. Pure tungsten guide rod Feed ramp and everything else polished. Nice build brother
@nobodytraining
6 күн бұрын
Thanks! You have excellent taste as well.
@justrickeyy616
26 күн бұрын
Keep that paper towel!😂 it bring all the goods to the table LITERALLY! Great video brother
@nobodytraining
25 күн бұрын
Sad to say but I mixed it up with a common paper towel and tossed it. 😥 no more freebies for my builds
@sg51psd04
2 ай бұрын
Glad I'm not the only one who has been bit by that comp after instal.
@nobodytraining
2 ай бұрын
Some of us are destined to learn the hard way!
@axe5.9
2 ай бұрын
Another good trigger would be the tactical pontoon peacemaker extreme carry!
@rickw5024
23 күн бұрын
yup, I love mine. So has everyone else who's tried it. a couple of friends bought them afterwards too.
@rickw5024
23 күн бұрын
Can I borrow that paper towel? Love the sense of humor and nice carry. are you shoving in down your pants yet after a month? first time i've seen that wing. I don't have a light on mine as I'm never out after dark and if I am it's a well lit city scape anyway so I'll have to skip adding the wing. Might have to add a comp one day but then I'm just waiting for PSA to drop their micro Sabre C1 that I'll switch to. Great vid
@jesus2299
2 ай бұрын
I had the same problem with my trigger Safety and I took 3 1/2 coils and that did the trick for me. Also, I use blue loctite, but it came loose after 500 rounds. So I reached out to Jonny and he told me to use red Loctite instead and it’s been holding up since. Just FYI.
@beng5573
Сағат бұрын
Nice trolling inserts😂
@RahGzz90
2 ай бұрын
Very clean bro 🔥🔥 got two recommendations to fully complete this build 1.Empire Katana V3 Magwell and 2.Night fision lower 1/3s blacked out rear sight and tritium front night sight again badass build brother🔥🔥🔥
@nobodytraining
2 ай бұрын
Thanks! Its was fun to do and even better to shoot. I’ve been going back and forth on magwells but I’ll check out the Empire. Same with sights…especially since I’d need to bust that comp loose 🤣
@RahGzz90
2 ай бұрын
@@nobodytraining magwells for me is a must cuz not only do they help with reloads they also lock in your grip even tighter on the frame love it and the sight is just cuz glock sight are plastic and had them break and walk off before lol
@RahGzz90
2 ай бұрын
@@nobodytraining other den that u got everything else amazingly Right and shes running flat and soft i can see it almost feels like im shooting it lol
@nobodytraining
2 ай бұрын
@RahGzz90 I do run magwells on most of my stuff. On my regular 43 I didn’t. Hence the dilemma if I’ll do so on the 43x. Range time will determine
@batman88ironman
25 күн бұрын
My shield arms mags haven't had 1 failure in probably 300 rounds or so this last year I've shot it.
@coach-
4 күн бұрын
You actually got a defective unit and JG would replace it. Something like 100 triggers he said went out that weren't right and he's since switched manufacturers.
@neverobey1477
2 ай бұрын
Great great build man.. but i had 0 luck with shield arms mags. I tried 1 of the PSA dagger just to see and ended up buying a few more!!
@nobodytraining
2 ай бұрын
Thanks! So far the Shields have been holding up for me (gen 3) and I just did some tests with 115, 124, and 147g range ammo and same weights with JHPs. No issues Thanks for watching!
@AngelRivera-wp9bg
2 күн бұрын
It feels so much better that sums it up lol
@nobodytraining
2 күн бұрын
It’s a quantitative measurement!
@SaloVaca
Ай бұрын
Love it, damn, just when I thought I was done spending money. I watched this video, the compensator and the trigger is a must have now. 😢 subbed.
@Glock_Doc
Күн бұрын
Thats a nice 43x, but i would not edc it. Keep it stock (except for the 15 round mag). Edit: and maybe sights and a light. Nothing more.
@impolite2n1p3r8
Ай бұрын
Should’ve waited on the radian ramjet for the p365 I heard about it and instantly said the build can wait
@thebronzetoo
2 ай бұрын
Just get PSA Micro Dagger mags and you didn't have to change out your mag release. Shield Mags are too iffy for my liking!
@readyrell2476
Ай бұрын
Damn good video brother got to love the surprise that keep showing up. I have almost the exact same set up with my 43x. I went with the Tungsten guide rod.
@nobodytraining
Ай бұрын
Thanks! Sounds like you have a nice build as well. Wish my towel would have given a tungsten rod. But I guess I should be grateful for what I have!
@kingdaniels8559
Ай бұрын
I loved every min of this video
@ACA7381AJ
2 ай бұрын
I did the same exact thing to my 43X but trying to find a holster is difficult, I had to go to a 48 mos holster and Tier 1 has them but I'm looking for a leather holster that has a extra mag holder is this configuration, but great video Bro!
@nobodytraining
2 ай бұрын
I have a local guy that built my last holster for my 43. Does a nice job. He’s going to build for the 43x. I also just ordered a holster from fourbrothers. It’s an OWB and is QLS compatible. Works with a 43x/48
@ACA7381AJ
2 ай бұрын
@@nobodytraining Thanks Bro! I will check them out
@nobodytraining
2 ай бұрын
@ACA7381AJ my pleasure!
@themjohnsons
2 ай бұрын
good content bud keep em coming
@armyhawaii50
2 ай бұрын
Good video. Enjoyed watching it.
@nobodytraining
2 ай бұрын
I appreciate you watching
@isidrosevier1125
12 күн бұрын
Man i need Johnny to make a trigger like that for the cz p07
@nobodytraining
12 күн бұрын
CZ Johnny has a nice ring to it
@isidrosevier1125
12 күн бұрын
@@nobodytraining hey there's an idea
@user-jg5gt5rg7t
Ай бұрын
aye man smooth build. so many surprises. What the heck is this?!?
@russdennis7026
Ай бұрын
New sub here. I like what you're doing. I can't say this enough when it comes to the trigger safety pin. Use lots of loctite. Mine would keep backing out and I would lose it. That's with my G45 though, but Im sure its the same on the 43x.
@JessieBlandingJr1982
2 ай бұрын
I had the 43x mos and 48 mos shot, both of them once, and sold the right away. I hated the recoil on them. If I would know about the upgrades you are doing plus a guiderod, I probably would still have them. I will get the JG completed kit for my G45 MOS, I never upgraded any internals, but I am going to get the competition trigger kit for mine but will still EDC it. I bought one SA Mag, and it never loads all rounds, and I personally had issues constantly with the mag. I still have the Nice video
@bruceesterline3170
23 күн бұрын
Good video nobody. I'm Mr Nobody.
@nobodytraining
23 күн бұрын
Hello Mr Nobody. Are you my father?
@godsson778
2 ай бұрын
Great Video
@GeorgiaDawg404
2 ай бұрын
Awesome video sir
@jamesoncross7494
2 ай бұрын
Very nice!
@tizben
2 ай бұрын
Very fun build
@billychampy316
2 ай бұрын
Great Video 👍
@briancarrier9299
2 ай бұрын
Great video. My bank account hates you now.
@RicoT08
2 ай бұрын
I just see an unreliable gun times a thousand.
@HighStrangeDrifter
2 ай бұрын
This. For what the Glock cost, plus all the add-ons, you could have purchased a better gun right outta the box. Glock cucks, man.
@sethblanton911
2 ай бұрын
Great video
@coreyhendrix4571
2 ай бұрын
Throughly enjoyed your segment, being a glock 43X fan ❤, but what holster are you running?,thanks Bro, keep em coming, stay safe safe.
@nobodytraining
2 ай бұрын
I’m glad you enjoyed! For appendix, I have a local guy that will make for me. He does nice work. That will happen in the next couple of weeks. I also ordered an OWB from fourbrothers. There holster is QLS compatible so we will see how it does! Don’t add any extra holes yourself!
@uncommon_korean
2 ай бұрын
DOPE build but definitely not touching much on my edc especially not the trigger. And prob just rock my g19 vs adding all the extra stuff. Great vid tho 👍🏽👍🏽
@nobodytraining
2 ай бұрын
I certainly can appreciate where you are coming from. So I guess you just have to build one as your range gun !🤣 I appreciate you watching!
@uncommon_korean
2 ай бұрын
@@nobodytraining good point!! lol. Time to start browsing 😆
@nobodytraining
2 ай бұрын
Go forth, my son. May your wallet be fat and the shipping be free!
@G8xGeeked
2 ай бұрын
Cool video I’m thinking about getting that barrel and comp for my 43 . Thing was shooting super flat.
@nobodytraining
2 ай бұрын
It was a noticeable difference. Just make sure that match your recoil spring to whatever load you are going to use. I’ll be doing a video on that next. Thanks for watching!
Should’ve replaced the plastic sights before you installed the comp. Now you’re stuck with them without a lot more work.
@nobodytraining
2 ай бұрын
I would have if I knew what I wanted. I didn’t want to get just anything. The work doesn’t scare me. I’m a brave soul 😉
@BrandensOutdoorChannel
2 ай бұрын
recoil control comes from the support hand. specifically pinky pressure; not a gas pedal.
@nobodytraining
2 ай бұрын
Yes the pinky plays an important role in recoil control. But you may want to look into race gun design and why they have gas pedals. Then you can apply it to, for example, Glock frames and why people do things like stippling or creating small thumb ledges forward of the take down.
@charlesruiz6492
2 ай бұрын
@@nobodytraining hey bud great video. Exactly what I was looking for! What kind of tool you used to get the safety out f the trigger? I can’t tell on your video is it a torx 6 . What kind of screw is that? Man you did an AWESOME job. Please let me know, I can’t stand hitting the frame every time I shoot😊
@nobodytraining
2 ай бұрын
@charlesruiz6492 Thanks! I like being useful on occasion 🤣 I used a 1.3 hex on that safety. I bought one of those kits off of Amazon that you would use to work on a cell phone. Has all kinds of tiny and odd ball bits. Hope that helps!
@toddsprosky4732
25 күн бұрын
Have you seen the black steel gas pedal
@nobodytraining
25 күн бұрын
For a 43?
@CarlosDelaoGunEngraver
10 күн бұрын
does the compensator, have any locking screws anywhere, feel like just threading on, it will come loose
@nobodytraining
9 күн бұрын
Nope. Spacer shims, loctite and torque it into place. It won’t come off unless you force it.
@Bull1175
2 ай бұрын
It’s a slim Glock 19 now.
@nobodytraining
2 ай бұрын
More like a 48. The 48 wants to be the slim 19🤔
@elsanch8675
15 күн бұрын
Berry noice
@brycewarren16
2 ай бұрын
I run a very similar set up. Few minor differences. And I love it. My S15s have been hit or miss. I’ve had 5 failure to feeds across roughly 1200 rounds. Not ideal. Also, I want to add the micro wing, but in my experience, the 43x frame flexes wayyyy too easily. When I grab my weapon light to make sure it’s snug, I can rock the frame rail enough to interfere with the slide. I’m worried if I put the wing on I’ll have even more leverage when shooting. How does that compare to your experience?
@nobodytraining
2 ай бұрын
Well this is only 300rnds so take it this with a grain of salt. I’m not seeing any slide/frame wear from the use of the wing so far. I have to push harder on the wing than my “normal” grip to get it to flex enough to touch the slide. That doesn’t mean that it isn’t happening during the firing cycle. My 43x frame does bend slightly up at the front as well. But that can be taken care of. On your s15 mags, what ammo are you running when it happens? And is it one particular mag or several?
@seaocean4868
2 ай бұрын
i tried running an extended slide release and it caused me to make the slide go forward on an empty mag
@nobodytraining
2 ай бұрын
Depending on where you grip the pistol that can be an issue for sure
@tjadams6480
Ай бұрын
How annoying is it to try to field strip it with that comp 😂
@richardwilliams9815
2 ай бұрын
Can you send me the link to those magical towels?
@nobodytraining
2 ай бұрын
Home Depot…but I think it’s like finding a Golden Ticket…
@richardwilliams9815
2 ай бұрын
@nobodytraining just my luck😂 nice job. It looks like it feels better and shoots flatter.
@nobodytraining
2 ай бұрын
@richardwilliams9815 it’s a night and day difference
@gearrunner
2 ай бұрын
Serious question. I’ve owned several pistols with comps. I usually wound up taking them off because of the hassle they were to remove and reinstall for cleaning. Have you cleaned the pistol yet and if so do you think the comp is worth the extra effort it takes to remove and reinstall?
@nobodytraining
2 ай бұрын
It’s a legit question. I haven’t detail cleaned it yet but figured that it will represent a challenge with the barrel kinda locked in place. Maybe once I get it a little bit more fouled up I’ll do a quick video. It’s definitely not something someone instantly thinks about when they buy a comp. I didn’t
@gearrunner
2 ай бұрын
@@nobodytraining I am a youtuber as well and kind of did the same way. I only used blue on mine so it wasn’t as bad to get off but still got to be a hassle. I love the 43X but gravitate more towards the XMacro and AXG Legion 365 now
@nobodytraining
2 ай бұрын
@gearrunner I don’t plan on taking it off unless I absolutely have to. I should be able reach most of the critical areas but ya, will take a little extra time. What were you running (comp) and how often were you cleaning it? I run my Glocks pretty dirty I’ll find your channel and take a peak!
@gearrunner
2 ай бұрын
@@nobodytraining I ran it on a custom Glock 19 that Dynamic Weapon Solutions did for me. I was carrying it at the time and I always clean my carry pistols after every 400-500 rounds. I just want to make sure they are clean and oiled Incase I ever need it.
@gearrunner
2 ай бұрын
@@nobodytraining Now I usually carry a 365 of some sort. I have like 5 of different configurations. I mainly carry a AXG Legion 365 now mostly.
@Instructor_Rodriguez
2 ай бұрын
How has the timing held up on the comp?
@nobodytraining
2 ай бұрын
So far it’s held. Granted it’s only been 300 rounds but it’s torqued on pretty well so I don’t see any reason why it would fail. If it had set screws like some others I’d be more concerned. If it does come loose, I’ll just use rockset.
@patricksnyder9530
2 ай бұрын
Would you recommend this over the new cr920x
@nobodytraining
2 ай бұрын
I haven’t handled the X so I can’t give you a good opinion on it. Would you plan on adding a comp to the X?
@patricksnyder9530
2 ай бұрын
@@nobodytraining no I’ve ran a g26.5 w a mag extension for 4 years and looking to slim down in width and grip length but keep the barrel length so I can pocket carry if need be now that I have my son. It’s shadow systems 43x with factory 15rd capacity
@nobodytraining
2 ай бұрын
@patricksnyder9530 I have seen the X. Grip texture looked better than the 43x. Trigger will also be better than stock. And it does look snazzy. Question is if the premium for the shadow systems is worth it (I think it $200-300 more) vs tinkering with the 43x?
@patricksnyder9530
2 ай бұрын
@@nobodytraining I’m a mechanic and build and in build and do all types of stuff on this one 26 so I feel 43x and the upgrades might save a lil buck to spend on the kiddo
@nobodytraining
2 ай бұрын
@patricksnyder9530 choose them wisely! They add up fast. And more importantly, have fun doing it 👍
@GunStoreViking
2 ай бұрын
How much was all these "upgrades"?
@nobodytraining
2 ай бұрын
Let’s just say that buying from different venders instead of one and all at once helped me sleep at night.
@GabrielLopez-ph6kn
Ай бұрын
Do you trust your life with this gun??
@nobodytraining
Ай бұрын
That’s the whole point of shooting 1000 rounds. To go through and test it. Along with numerous weight and shape JHP’s. Test its reliability. Having shot 1k fmj and a couple hundred JHP’s, yes I would.
@GabrielLopez-ph6kn
29 күн бұрын
@@nobodytraining trust in glock
@PARANORMALaj
2 ай бұрын
I just can't get behind the 43x, its like a 19 with none of the benefits. Conceals the same, at least for me. I bought one, wanted to love it but just couldn't.
@nobodytraining
2 ай бұрын
I can respect that. Not every pistol model is going to work for everyone. Luckily we have a lot of choices! Thanks for watching!
@samclack3693
27 күн бұрын
It definitely does not conceal nearly as comfortable for me (I live in Florida) I don’t get to wear heavy clothes so the slimmer profile is very noticeable and appreciated as well as the fact that’s it’s also lighter
@samclack3693
27 күн бұрын
I literally just switched from the 19 to the 43 because it’s so much more comfortable and easy to conceal
@NinjaBlasterPhoenix
Ай бұрын
🔥🔥🥷
@georgejung2
2 ай бұрын
Did too much .. Throw a rmrcc and tlr7 sub like a real man
@nobodytraining
2 ай бұрын
I came up short on the build. Forgot the bottle cap opener
Пікірлер: 134