I remember flipping through the pages of gm performance parts catalogs in the early 90s and seeing 'raw' heads like this. When chevy actually backed racing, they had all sorts of speed parts that anyone could order through their local dealership. 4.3 blocks that could be built to 320 cubes, raw crank forgings, head castings that were little more than 50lb chunks of aluminum. Now it's all crate engines. Hell, they even had performance junk for iron dukes
@gailtaylor1636
Жыл бұрын
Helped guy with an Iron Duke. He bought a used Super Duty head from Jeg's that was off I think a baby Pro Stocker? Also bought 7 six inch small journal Child's & Albert's aluminum rods. The eighth went that a way on starting line. Had to narrow the rods .077" to fit stock crank. Diamond pistons. Ultradyne cam. Crane rockers. I made the oil pan & narrowed the rod bearings. Was in a dirt car. Ran those rods two full seasons. Win one heat race. If he started on poke, would dive to bottom of track and spin out every time. Just never grasped the car didn't/couldn't create enough side bite to run the bottom. Would spin and never stop moving, go high and pass till 3rd or 4th on outside in couple laps then...dive to inside and either spin or door the hell out of somebody. He was an idiot. But I miss him. Cancer sucks.
@gailtaylor1636
Жыл бұрын
And I hate autocorrect. 🧐😂🤣😂
@neal6418
Жыл бұрын
@@gailtaylor1636 Very sorry for that..... even idiots don't deserve it. 👍👍
@Ws6Ms
Жыл бұрын
Dude that's awesome
@txoutlawtruth4201
Жыл бұрын
Hah I was about to say the same thing. I remember seeing magazine articles about the symmetrical port canted valve GM small block heads in the early '90s . I remember seeing a road racing engine with efi velocity stack injection on it. It seems like Katech and Reher-Morrison did a lot of development with this head. It seems like it was an improvement on the Dart Buick heads.
@johnfry9010
Жыл бұрын
Pro Stock Truck was Bad Ass , I loved that class !
@danonoveh8114
Жыл бұрын
Looks like a Boss Cleveland Ford head
@DragBoss351Cleveland
Жыл бұрын
@DragBoss Garage Eric, looks like a Cleveland head, lol. Great idea Chevy. Great video thanks
@drcolster
Жыл бұрын
The GM Splayed Head, 358 Pro Stock Truck.. yes around 1100 hp engines towards the end, Jenkins, Pannella were at the Top.. That's a Virgin set, they welded everywhere when they used them in Pro Stock Trucks.. Decks,Inlet Flange,Port floors,Tops of inlet ports to raise inlet runner.. they spent days welding them.. i've see the pics, worked on 1 of those engines here in Australia...Yes crazy HP per cube back then with a modified GM head.. great share Eric...
@dennisrobinson8008
Жыл бұрын
Badges power
@69JANKS
Жыл бұрын
GM’s 4V Cleveland head lol Cool👍🏼🏁
@tomasto351
Жыл бұрын
Lol yep thats what they are. GM knew a very long time ago the Ford Cleveland head design was superior flow and power. The LS head is a direct descendent of the 4v Cleveland head.
@ironmike742
Жыл бұрын
@@tomasto351 no it's not
@kennydemartini2169
Жыл бұрын
Wrong. It is an exact copy of the big block Chevy cylinder head, that went into production in 1965. The same is true with the LS series of heads. The Cleveland head wasn't even thought of yet in '65.
@dannycalley7777
Жыл бұрын
69 J ................A 3 Cleveland , it took them 10 years !!!!!
@big3fan916
Жыл бұрын
@@kennydemartini2169 Wrong BBC heads have the intake ports next to each other like the SBC head
@shvrdavid
Жыл бұрын
That head is still made under multiple different part numbers 12480146, 12480147, 12480153, 24512517, 88958684. Many dealers still have the 10185040 castings in stock, brand new in the box.. They are the same castings.. There are some machining differences and intake valve location in the later partially machined heads, but you can still get those differences unmachined to duplicate any 10185040 head out there. They are on page 156 of the 2022 GM performance catalog, still available to purchase... So are many BBC versions. Chevy never got out of racing as many people claim, the BBC DRCE is still produced and raced in multiple classes. Just as this head is....
@nathanhine286
Жыл бұрын
Wow, awesome info
@rotorr22
Жыл бұрын
Looks more like a Cleveland head.
@stellingbanjodude
Жыл бұрын
Fbody production lasted through 2002. That head was available through the GM performance parts catalog. It’s similar to the SB2 head.
@mitchelljohnson9548
Жыл бұрын
that canted valve head design for smbc .has been around since the late 60s like late68 -into69 . used to call them porcupine heads for the scca class 302s . my friends dad had those on a 69 z28 ex scca racer it had a cross ram manifold also , special cam , pistons etc. just for that design head. i think if i remember right they were cast by winters foundry gm's go to for their high perf parts castings.
@jamesroberts807
Жыл бұрын
Looking like a Nascar ford head
@robertbcope
Жыл бұрын
Love looking at old "top of the line" tech like this. Thanks for sharing!
@hughobrien4139
Жыл бұрын
Back in the early 90s I would open up those GM performance parts books and drool all over the bow tie cylinder head section. I’d work all day in a little automotive machine shop and dream of being able to afford a set of any bow tie heads. Several years later I went to work in a machine shop that took car of many different world champion racing engines. The first thing I noticed was bow tie heads sitting on the shelves in the back of the shop. The bone yard so to speak. I’d get myself into quite a bit of trouble pulling those old heads off the shelves marveling over them. The older more experienced guys in the shop would just kind of laugh at me and disregard the enthusiasm I had for them. I’d tried buying them on many occasions never being told a price only the response, “you don’t want those heads, get back to work.” It was disheartening to a degree. Racing season ended and in come all of the engines to be freshened up. That’s when I learned why I was being told I didn’t want those bowtie heads Compared to what was out there getting it done they were junk. There were still about 7 or 8 out of some 40 or 50 engines that had bow tie cylinder heads on them. Those engines always seemed to find their way to the back of the priority list. Toward the end of the freshen up season I learned even more. The owners of those last few were obviously operating on a budget. They has spent so much money developing something that had been great at one point in time. Now they were just doing their best to hang together. I never knew about heat treatment in aluminum until then. The major problem with having these few engines with these heads on them was convincing the owners that it was time to get a new set of heads. I relate to it like telling a long term pet owner their pet had run its course in life. You could show them the hardness test (that was a pretty convincing visual to myself) and the owners would refuse. “Just one more season and we will work it into the budget.” Out of those 7 or 8 maybe two would make it off the dyno without a bad leak down test. Valve seats and guides moving around that you knew were just sealed up as perfect as can be. Head gaskets rattling around, you name it, that problem likely arose. The rest would have to be reworked and re tested. Limp them back off the dyno and maybe a few quick fixes throughout that season. The ones that fell to the wayside went on to that shelf I was always screwing around at. As the years progressed. You see some newer less used versions come in the shop. I never got to see a set that were not compromised in one fashion or another. Most of all I got to see some poor young man with ideas much like what I had that had fell victim to a soft set of aluminum heads that couldn’t be sealed up. Then there was the subject of re heat treating them. That’s a whole other story.
@shanerorko8076
6 ай бұрын
I wonder what would happen if you HIP treated a soft set of heads?. Yea I'm a mechanic by trade, I always tell people, once an alloy head overheats it's better to buy a new head instead of just doing a gasket. It's also why TTY bolts always pull the threads out of alloy blocks, then you need to time sert them.
@xxxmikeyjock
Жыл бұрын
actually said 'hey a boss 302 head'
@billfioretti3013
Жыл бұрын
Also like a Ford Cleveland head first designed in 1968. If you're of the school that the Ford was a knock-off of the Big- Block Chevrolet, Rat engines did not have symmetric ports, had different valve layouts and angles and a different design combustion chamber. Todays LS cylinder heads will bolt-up and function on Ford 351 Small-Blocks without much fuss. (There are even custom camshafts available for that conversion.) Get's one to wonder.
@danielnolasco119
Жыл бұрын
Lol yeah they copied the idea of canting the valves on wedge heads, as the NASCAR rumor goes a gen 2 bbc was sold to ford which is why it took them so many years to come up with a canted wedge of there own. Search up the canted 302 small block Chevy, it was designed before the Cleveland and unveiled before too
@johnsalvaterra3116
Жыл бұрын
@@danielnolasco119 but it was a rumor, canted valves are from experiments, of Ricardo engineering in the 30's. Everybody has followed
@oscaracme
Жыл бұрын
looks like a Cleveland head
@wymer999
Жыл бұрын
I had a set of the v6 version of that head, heavily ported flowed 420cfm@ .700” and would be flowing over 300cfm by .400” exhaust was 315cfm @ .700”
@ejgrant5191
Жыл бұрын
That cylinder head was used on the Chevy Intrepid GTP road race car around 1991. The Intrepid scored one win in IMSA but, against cars like the 1000+HP Nissan GTP prototypes pretty decent for a 7.0 Litre motor (as I recall)....Sourcing valvetrain hardware for them is a nightmare! T&D used to make rockers + stands for them.....Those fittings might be for water cooling distribution.
@ray_s281
Жыл бұрын
I was thinking the same thing. The Indy 500 Buick V6, the "Buick on a Chevy block" for Nascar (also cast by Dart?), the IMSA Intrepid GTP chevy V8, and the Oldsmobile DRCE were all from the same DNA.
@ejgrant5191
Жыл бұрын
@@ray_s281 .....Buick heads were done originally for NASCAR but, they were outlawed they have a shallower valve angle somewhere like 9 degrees, those IMSA GTP heads are 11 degrees as I recall...It's been ages since I was around them....That GTP splayed valve head was offshoot of the Ryan Falconer V6 Indy motor program and the turbocharged Corvette GTP IMSA program (the Falconer V6 IMSA motor exceeded the HP of the Porsche 956/962 GTP variants of the same era, the Lola GTP chassis was abysmal! Bad ground effects and other things, GM teams really had a battle in that Era....Falconer made a V12 motor that was popular in expirimental aircraft with the canted valve heads....The IMSA Intrepid head was refered to as "The Splayed Valve Head".
@superkillr
Жыл бұрын
Why TF do you keep saying it looks like a BBC when it obvious looks like a Cleveland FORD.. DUDE your chevy one train thought love is showing.
@jonathoncouchey7151
Жыл бұрын
Actually y it looks like a Chrysler si gle rocker shaft firepower head. But I'll leave you to find that one out for yourself.
@WeingartnerRacing
Жыл бұрын
Probably because it looks like a shrunk down version of the spread port bbc. Hence little Cheif instead of big Cheif. Your ford fanboy is showing. Nobody cares who came up with it first but who did it best.
@brianadams429
Жыл бұрын
@@WeingartnerRacing big chief heads gm copied a head that Larry Olsen built. Larry Olsen is one of the owners at Lsx concepts. If ya want to listen, i would suggest to. DragBoss Garage youtube channel Larry Olsen. That dude has done some stuff.
@eddunn6455
Жыл бұрын
Looks like a Ford A3 Cleveland high port head.
@deanstevenson6527
Жыл бұрын
Aurora's Pontiac part numbered, open wheeler block used D3 style Ford NASCAR heads. The heads were devised for an 8.2 to 8.45 inch block with 55mm camshaft journals, and that head appeared in AVESCO ( Australian Vee Eight Super Cars) in 1993, and a version of it is still used today in 2022. Bryant made the cranks, Aurora supplied the blocks, GM Powertrain the heads, Bill Miller the pistons, Callie's/ Cariilo the rods, but the Dart cast head porting was free after the CNC profiles and dyno numbers were supplied to AVESCO and Group 3A FIA rules. It was a generic thick casting from which the end user performed the porting.
@racerd9669
Жыл бұрын
GM Cleveland head.
@jonathoncouchey7151
Жыл бұрын
*gm Chrysler firepower single rocker shaft head.*
@markmccarty9793
Жыл бұрын
Looks like Yates heads for a SBC!
@nova467spanker
Жыл бұрын
Yup looks just like a Cleveland head. Chevy had no answer for the Cleveland head for their small blocks so they had to copy it.
@jcoats1203
8 ай бұрын
I agree, looks like a Cleveland head. Oh, by the way, does that Cleveland head look like a big block Chevy head that came out Jan. ‘65. “YUP”, sure as hell does. And what the eff does it matter who copied who?
@nova467spanker
8 ай бұрын
@@jcoats1203 Yup just like chevy copied Dodge with the canted valve design. I'm just stating the facts that chevy wimps cried so much in Drag Racing about the Cleveland that the NHRA had put the heaviest weight requirements on any car with a Cleveland "to even the playing field". If you don't believe me look it up yourself. It was so bad for you chevy boyz that the NHRA were busting you Corvette guys putting Clevelands in them 🤣🤣🤣 The Cleveland's were also restricted in NASCAR to let you chevy and Mopars keep up. Just like how NASCAR banned the Ford 427 Cammer - made to much power and not even your chevy "mystery aluminum 427 L88" could keep up. Do not think I don't know some history guy "pronoun"??? You are not dealing with some LS scrub here...
@Tyee2
7 ай бұрын
@@nova467spanker😂😂😂
@jcoats1203
3 ай бұрын
Once again, who gives a eff who copied who. Ford had some great engines, Chevy had some great engines, Chrysler had some great engines. Who gives a flying eff, LS scrub?
@NickDigger3000
Жыл бұрын
I bough a 698 BBC Chevy from Tony Christian that look just like these sbc heads. 20 yrs ago. Tony said they were experimental pro stock heads. It runs really good for what it is. Thank you for talking about these heads. Awesome video.
@worth287
Жыл бұрын
Hi hows it going. I saw your post. And was wondering if your heads had a part number on them . I have a set and been trying to find information on them. They are for a big block chevy
@NickDigger3000
Жыл бұрын
They do have some numbers on them. I live in south Florida and got hit by the hurricane. I moved my car to my father’s steel building. Car is safe but can’t say the same about my house. I will be bringing it home next couple weeks. Thanks for commenting. I’m very curious what they are also
@worth287
Жыл бұрын
I just saw a post online. Gm have a early pro stock style head. Like the big chief heads thats what I think I have. They made them for the small block also.
@NickDigger3000
Жыл бұрын
I’m pretty sure we both have the same kind. I will get back with you. I’m very interested in what they are.
@Hydrogenblonde
Жыл бұрын
Looks like a Ford Cleveland head.
@hotrod7938
Жыл бұрын
Exactly
@jonathoncouchey7151
Жыл бұрын
*chrysler firepower single rockershaft head* you'll thank me later.
@ejgrant5191
Жыл бұрын
Looks Like a Chevy 1963 Daytona Mystery Motor NASCAR Head or 1965 Big Block MKIV Chevy head to me...but, whats a guy like me know....
@keiths4874
Жыл бұрын
years ago saw a SBC with a set of Cleveland heads and didn't think it was possible, found the bore spacing on a 400 SBC very comparable to a Cleveland head, and the engine had homemade intake and injected
@Hydrogenblonde
Жыл бұрын
@@keiths4874 yes, I saw that many years ago as well.
@brad9803
Жыл бұрын
Those are down nozzles bosses welded in and plugged in the intake port. You can see the holes drilled to vent the nozzles. The outlaws made a rule when this head comes out that basically said any engine needed to have inline valves.
@superkillr
Жыл бұрын
Anything to keep the fords out and Chevy at the top.
@lte008
Жыл бұрын
They are in the exhaust port. So not down nozzles.
@superkillr
Жыл бұрын
@@lte008 Dude you're blind as bat. They clearly go straight into the bowl on the back side.
@lte008
Жыл бұрын
@@superkillr after looking at some pictures. I believe you're correct.
@MidnightMechanic
Жыл бұрын
F body production ended in 2002. As for the thread holes by the exhaust ports, if those lead to the water jackets, then most likely it was for port cooling so the exhaust manifold could run cooler and reduce the odds of cracking.
@DavidB7474
Жыл бұрын
Sportsman heads were the bomb at first cause it was all we had as far as cast iron head back then. Well bow tie heads but this were like big bucks. And the big name aftermarket heads. It’s not like today at all. We need a reasonably priced, symmetrical port gen 1 sbc head, shaft rockers, efficiency flow, and they would stomp LS engines. They do have sbc symmetrical port heads, but big money!!
@rodneybyrd9516
Жыл бұрын
Big bore destroker small blocks with splayed valves! I remember Chevy and Dodge were flying, don't remember Ford Rangers being that strong. I loved that class also!!
@rotorr22
Жыл бұрын
The Ford's were trying to compete with the old C3 head. Ford had designed a new "mirror" head for the class, but it never came to fruition due to the class being cancelled.
@tommywilliams5135
Жыл бұрын
10 years ago we ran 4.34 ci sbc with buick version 10 degree nickan Brothers had done all port work they were from early 90s we bought the complete running motor cam lifters push rods rockers valve covers intake and head studs if you didn't have everything it would pain in ass to put together I belive it was just over 900hp car was under 2200 pounds with driver it would 5.20s in 1/8 mile you still had turn it 7800
@melissamcallister2867
Жыл бұрын
Its a chevy bowtie 45cc combustion chamber. There was a 1st and 2nd design 1first design is 263cc intake runners and 2nd design has 240cc intake runners same valves
@theonlywhitemule
Жыл бұрын
Those pro stock trucks were really cool for the time.
@Lance.West4
Жыл бұрын
A good SB2 heads which are similar, flow 420+. I always thought chevy only had the 18* race head at that time for sbc. At least in Nascar early 90s that's what the chevys were using. Mid 90s nascar started running SB2 stuff. I'm not familiar with the drag racing stuff though.
@garthlightfoot9809
Жыл бұрын
Looks like a Yates head
@jeanlawson9133
Жыл бұрын
Reminds me of the Boss 302 Ford in appearance,,,😎
@TheShifty450
Жыл бұрын
They had a pro stock shootout every year in Oregon on their way to Seattle. It was rad to see the trucks and cars back then. That's was the good years
@worldssickestmedia2713
Жыл бұрын
I gotta build one now. Getting rid of the Siamese exhaust ports is the biggest win for me. And the splayed valves is a great bonus.
@anytow
11 ай бұрын
Eric, those holes are for fuel injection nozzles. I am looking at them and they have a 1/2-20 nf nozzle thread. If you look carefully you can see the seats about 5/8 down. The epoxy is covering the hole in the back side of the port. I would bet that if you machine a bushing that threads into those holes with a say, 1/8” drill hole and carefully drilled that you would be 1 drilling epoxy, and 2 you would break through on the intake port on the backside of the valve. Someone else mentioned that this was outlawed by WOO. I believe that was the case, and someone was just trying to save the heads so they could use them. Have you ever tried making an adaptor and putting shop air to them to see if they go anywhere else? Those would be nice on a vintage Supermodified!😂
@dougzack4565
Жыл бұрын
Looks like a modernized 4v Cleveland
@timothybayliss6680
Жыл бұрын
Look how big the ports are. It still looks old-school with really square intake ports. Camaro stopped in 2002 model year. There was an overrun on production and there was still new ones well into 2003 at dealerships Edit. Sb2 heads have the same issue with intake port head bolt interference.
@jaybyrd8592
5 ай бұрын
The 351C block also shared many similarities with Oldsmobile's Rocket V-8. In conjunction with the similarity of the 351C head to the BBC, it has led to some conjecture that the Cleveland might've been heavily influenced by Semon E. "Bunkie" Knudsen, who defected from GM to briefly run Ford in 1968.
@swampy6x659
7 ай бұрын
Production spread port heads [both exh/inl.] were being done in Australia in the mid 80`s Went all the way thru to the 2000`s to compete with early gen LS motors , and having excellent dominating success in circuit racing . Unfortunately the aussie v8 was due for a full redesign and the decision was made to oem fit LS to consumer vehicles
@ldnwholesale8552
Жыл бұрын
Nascar used that style heads, canted valve like a Ford. V8Supercar also use a downsize version of it. Smaller runners for 5 litre engines. Our Stupidcar engines are all Fords,,, 302 deckheight,shortarse roads, canted valve heads. Some though have bowties on them!!
@lazarikthompson2892
Жыл бұрын
Is it possible that you could get one of the newer SB2 heads to compare with it so people could understand where it started and where it went to after that
@The_m41lman
4 ай бұрын
I'm almost 100% certain those are the splayed valve heads rather than the sb2 and 2.2 heads...just due to the spread port exhaust because the sb2's still had the siamese exhaust.
@stevenbean9706
Жыл бұрын
I ran the pontiac heads on my last small block enjoy your post found you totally by accident. I had some of these on my pro stock s10 as well they work well with a full floating full roller set up.
@MidnightMechanic
Жыл бұрын
Even though the head came out in '91, I doubt there's a port injection intake manifold made for it. You can get a TPI manifold for the Vortec heads, but this was most likely made for a carbureted intake manifold, specially designed to fit this head. There are cheats to make TPI pretty fast flowing and plenty of fresh air storage in the plenum, and they really do well supercharged, but good luck finding a manifold!
@larryw5429
Жыл бұрын
GM stopped production of the camaro and firebird in 2002. From 1998-2002 the v-8s were LS 1 5.7 liter! Before that they were LT1 350!
@WeingartnerRacing
Жыл бұрын
Thank you. I couldn’t remember when they stopped production on them. I just remember the s10 being so cheap.
@mickcollins3196
Жыл бұрын
Yea great heads and if you ever see a set of buick heads off the indy car they are even bigger abd flow more great heads indeed
@chrismadaj8751
Жыл бұрын
Very well said Eric thanks for the history on small block heads love this kind of stuff really cool GODSPEED
@mylanmiller9656
Жыл бұрын
There was a head that was built years before that, Chevy was playing with a Copy of a Canted valve head back in the original Trans Am days!
@chadkent1241
Жыл бұрын
They had to have a head made aftermarket because the oe heads couldn't match modded oe Clevelands. Bob Glidden forced GM to do this AND the DRCE because the oe GM stuff couldn't hang with Ford.
@GuitarManiac64
Жыл бұрын
Thank you for doing this video. I’ve been looking for info on these for like 3 years
@WeingartnerRacing
Жыл бұрын
You are welcome.
@LeachimSagrav333
Жыл бұрын
So basically a ford Cleveland head!
@hendo337
Жыл бұрын
My understanding was that the 11 deg heads were originally for the Pontiac Nascar program and most of the Chevy teams started using them. Maybe that why it was a "little chief" because Pontiac.
@doyleboyscustoms3151
Жыл бұрын
Just got a set for my 4.3 v6 that were ported by Kevin Self! Super excited to get these setup on the bowtie
@The_Painter31
Жыл бұрын
Oh yeah, I remember all of it. Those 040 heads the 11, 15 and 18 degree heads and then the SB 2.2 heads and now the RO7 heads.
@rikiwakwak
Жыл бұрын
You ever seen the Smokey Yunick small block Chevrolet Hemi? I like it ; )
@hollowell427
Жыл бұрын
looks a lot like a SB2 head from the early 90's that nascar was running.
@5uprnva
Жыл бұрын
Looks nothing like the sb2 😂. Sb2 was not a symmetrical valve layout.
@DavidB7474
Жыл бұрын
This is why I save old gm performance catalogs.
@shoominati23
Жыл бұрын
I think it might have been to combat the Ford C3 and Chrysler W3 or whatever in Nascar, because they were able to get 720 out of the canted valve Fords and Mopars, but the most you could do even with the 'pontiac' 15 degree head on a Chevy was about 680 .. a stopgap between the SB2 engines perhaps?
@bobgyetvai9444
Жыл бұрын
Nonsense on the 15 deg Pontiac which is a Brodix -12P head . You better take another look at the sprint cars of the day and competition eliminator cars too . BOTH FAR Exceeded 680 dude .
@dougzack4565
Жыл бұрын
@@bobgyetvai9444 He specifically said Nascar
@bobgyetvai9444
Жыл бұрын
@@dougzack4565 the 15 deg head Wasnt Legal Ever for Nascar dude . That 15 deg known as the 328 head(12p Brodix) if memory serves me while the 869 was the one legal for nascar in Pontiac part numbers . Long time ago but it was basically a 10x Brodix if iirc . Theres alot of bs on here for what was what back then . The Fords werent 50hp stouter either back in the day . Aero was the advantage in Nascar for Ford . The head Eric has shown never was a Nascar head either . Drag Racing or big inch mice in GTP Road Racing . They had valvetrain weight issues BAD .
@circlejerk6861
Жыл бұрын
These splayed valve heads were developed for pikes peak racing to combat depleting O2 levels as altitude increased
@ScooterLee-ei1ep
Жыл бұрын
Nope. They were developed in the 80’s for nascar. But they were used more by drag racers.
@GB-gr2yw
Жыл бұрын
Looks more like a A3 or C3h yates type
@DavidB7474
Жыл бұрын
There are companies today that make symmetrical small block Chevy heads. They are not cheap. But HUGE!!
@fast73nova
Жыл бұрын
MBE i$ one of them.
@leekavanagh6549
Жыл бұрын
The Dart little Chief has a symmetrical valve layout, but a left and right intake port same as BB Chevy
@hotrod7938
Жыл бұрын
That head had to be insane for 1990s
@neal6418
Жыл бұрын
for sure.... hey Hot Rod I'm now your first Sub... lol Neal Head .... Maryland yeah I've heard all of the "Head" jokes and even made up a few. I've been porting heads since I was a teenager (listening to and learning from guys that may or may not have known jack) I'm 59 now and before I die ,God willing, I'm going to own a flow bench. lol I've always had good results without one though. Peace brother .
@hotrod7938
Жыл бұрын
@@neal6418 I literally bought one last week.
@amazin1827
Жыл бұрын
It's a Ford Cleveland RIP Off!
@neal6418
Жыл бұрын
@@hotrod7938 That's awesome Hot Rod 👍👍
@bobgyetvai9444
Жыл бұрын
Valvetrain was its biggest issue . Way too heavy . The port needed to rev but the valvetrain couldnt cope with the rpm .
@Thumper68
3 ай бұрын
Chevy still sells SPLAYED-VALVE ALUMINUM RACE CYLINDER HEADS and sb2.2 heads on their website.
@thesepeoplearecriminals1731
Жыл бұрын
Looks like a sbf head
@jamest.5001
Жыл бұрын
Camaro/ firebird stopped in 2002, I was hoping for a new decently looking new model, then heard they aren't no more, but I like a truck anyway, a extended cab short bed, with a minimum 350-400 HP, and be capable of 20-28mpg, it would been awesome if chevy GMC would made a turbo 4.8/5.3 truck with a 6speed option, back in 03 +/-, or a supercharged version, or even a LS-7 truck , with a modified 4L80, 6L90, 3k stall, and twin turbo's😮 3.73(with a optional 4.10-4.30-4.56) gears with 29" tires, and modified rear suspension moving the springs inside the frame, and flared fenders to allow a 305-50-20" , and fit 12" rims with 2"-4" drop suspension, i belive gm would sell tons of these , especially if an awd versikn was available, capable of 305's on all corners,
@TinHatRanch
Жыл бұрын
1998 was the FIRST year for the LS1 Camaro.
@thebegrsshow
Жыл бұрын
Back in the day Eric, GM used to have most of their aluminum blocks and heads cast at Mercury Marine.
@johnpopoff7950
Жыл бұрын
They used Winter's Aluminum Foundry back in the day. Intake manifolds and the ZL1 427 were made there.
@rvg440
Жыл бұрын
most of the 357 cube engines made very close power to eachother. I know Jegs was making around the 970hp range when Panella ran the first 7.39 if i remeber on the same meeting Lingenfelter and jegs ran in the 7.3's also. not much seperated them from that point. One of Jegs engine builders I was with, filled me in on the power outputs. it was the best racing as far as I was concerned. Brad Jeter, Larry Koop, Greg Stanfield, Caggnazi and then the Eatons were great to watch as was Patterson. great era shame they got rid of them.
@King1614
Жыл бұрын
That kinda looks like the Brodix Bd1010 head. I’d love to see you work on an SB2 head
@WeingartnerRacing
Жыл бұрын
Me too
@Hogiewan1
Жыл бұрын
Very cool and interesting. Thanks Eric!
@Go4BrokeOffroad
Жыл бұрын
Looks like a 351c head to me.
@inspectorbusiness4892
Жыл бұрын
These were used in NASCAR as a generation 3 head. The sb2.2 was gen 5. On the track as early as 1985. In 1990 they became mail order from GMPerformance.
@WeingartnerRacing
Жыл бұрын
I pretty sure it wasnt used in the cup series. It went 23degree, 18degree, then sb2. These to my knowledge were never used in nascar cup series.
@inspectorbusiness4892
Жыл бұрын
@@WeingartnerRacing for two years. 85,86. the R7 .
@brucebehnke3227
Жыл бұрын
I would try cutting head bolt towers on top of port & drill hole for socket & put short head bolt in there & make rubber seal plug for intake port just to get rid of head bolt shaft in port! 🤫🤔❓🤷🙋
@dirtthunder1638
Ай бұрын
NHRA Pro Stock truck started a year or so after NASCAR started the truck series.
@waynep343
Жыл бұрын
Only been a subscriber for a short while. Did you ever run across the nascar heads somebody was showing around to teams but even though their heads made better power on the top end the flow numbers weren't there on the bench. I understand the bowls were filled so the air did not pile up into the bowl. Since the intake is opening and closing. The tapered former bowl area was less disruptive at high speeds. I have the unfortunate ability to look at and visualize airflow. In 1980 I was sitting in the lobby at cyclone headers. There was a conversation across the room about their prototype AR headers for motorhome 440-3 engines. Changed the airflow enough that the motorhome got 33 mpg. But melted the pistons. Ran great with significant carb tuning changes. 30 years later the tech across the street built a 14 to 1 NA H22 honda for his drag civic. It had horrible reversion in the exhaust. I did a paper towel drawing of an insert to go in at the collector flange. On the mustang dyno. It cranked out 265hp. He slipped the tuning tube in and picked up 10hp. The harshness was gone. It sounded like a healthy big block chevy. A few years after that I was visiting with the new shop neighbor. A 410 winged sprint car. He listened with a glimmer as we looked at his exhaust. But no place for a tuning tube . Then he pointed to the big box on the roof overflowing with sprint car headers. I think he said a dozen sets. But the best top end power set had stepped down primaries. Yes big to smaller.
@Baard2000
Жыл бұрын
Hi Wayne, that sounds so familiar !! Somewhere in 2005 I got a Alfa Romeo D2 ( Deutsche Tourwagen Class) 2 liters NA with 310hp on the flow bench. As I already had done some Ford zetecs with 260 hp , Hondas with 285hp on the flow bench I was sure this Alfa head would blow away the previous mentioned heads completely away . How disappointed I was after 1th test: even lower than the Ford zetec , and that was even lower than the Honda with 36.5 mm intake valves . As spare parts of this engine were scarce the engine builder used carrillo lightweight rods and JE pistons to complete a 2th engine. It made 265 hp even with stage 2 cams and headers. Then finally they found the last Mahle piston set available and put in a set of Pankl titanium rods. ( cost 10000 in total) Without ANY other mods it made 314 hp !!!!! Unbelievable to many ..but I watched it hapoen in front of my own eyes...... Edit: the pistons of JE were so tapered that with same squishdistance the pistons rocked so severe hitting the cylinderhead so hard that burrs developed on pistons. So pistonrings couldnt seal perfectly despite gapless Total Seal rings. The carrillo lightweight rods big ends deformed so much that they clamped the bearings , metal to metal contact areas on bearings , on the cranck but flexed back to perfect round when measured......
@Baard2000
Жыл бұрын
Recently had a 2019 Nascar head on flowbench . Flow is high , swirl incredible , but flow is not as high as Lsx DR head. With 850 Holley a 5.8 liter makes 900 plus hp. So.. hp is unbelievable!. Low internal friction , efficiënt combustion induction etc. So airflow is sacred.....but not the only holy grail.....
@nhragold1922
Жыл бұрын
I see alot of comp guys running the spread port sbc stuff. Always wondered what some of the numbers and specs are.
@johnpopoff7950
Жыл бұрын
Well over 1000HP no blowers no turbos. The way it should be.
@nhragold1922
Жыл бұрын
@@johnpopoff7950 definitely! 10,000 rpm little monsters lol.
@mekanicn7778
Жыл бұрын
looks alot like a certain "Cleveland" head
@scottm7341
Жыл бұрын
Eric, GM also made big block chevy heads for pro stock racing, part number 10051128. It has symmetrical intake ports to correct the problem of the long leg/short leg runners on the conventional bbc heads. Have you ever played with those? The vortec 8.1 heads go back to that same idea. The fact that gm sabotaged their bbc heads with the good/bad port design is so annoying.. If they had just put 20 more minutes of thought into the head bolt and runner layout, we would not have been stuck with the flawed design ever since.
@johnpopoff7950
Жыл бұрын
So does the ZZ632. Puts out over 1000HP
@john.daniel14
2 ай бұрын
Water to cool. They ran an external tubing under the exhaust manifold with connections to the head at every exhaust port.
@rodneycampos8452
Жыл бұрын
I have a set of those that I got with an engine I bought. I could not find any info on them. Now I know.
@JetBlackmf
10 ай бұрын
I never liked the SB chevvy siamese exhaust ports , these heads now have the same sense of balance SB Ford heads have.
@allisonkruizinga1820
Жыл бұрын
gm version of a cleveland/boss head, no doubt in Aus, they (gm) hit a brick wall with the then current engine rules (5.0 litre) and could not make the power the fords could, siamese intake and centre exhaust ports wouldnt allow sufficient room for fuel injection intake/exhaust primarys - gm teams also got a special short deck block to match the ford motorsport/boss302 to drop the centre of gravity of the engine package (so basically a chev version of a boss302)
@yarrdayarrdayarrda
Жыл бұрын
I enjoyed watching Pro Stock Truck.
@Watchout1010
Жыл бұрын
The most impressive head I have ever seen was a belt driven cylinder with cups and no valves-was in a sema flyer-guaranteed to double the hp on any engine..smokey eunik or some other racer
@dondotterer24
Жыл бұрын
When I get a chance I will look through all my books and articles on this head
@chrisgleis4297
Жыл бұрын
Temp sensor s maybe for afr adjustment because the back of the engine burns hotter maybe?
@kimcokevin
Жыл бұрын
So a small block Chevy race head is a head that looks like a Ford head. Symmetrical ports and canted valves.
@jonpaulschafer1871
Жыл бұрын
Thank you for the valuable details is it still possible to purchase these heads and finished form what is the minimum bore size that these heads will mount on I would appreciate a comment at your convenience thank you
@KyleP133
26 күн бұрын
Those plugs by the exhaust ports, could they be coolant ports?
@jasonstormoen
Жыл бұрын
I know Eric knows but i see many get tied up in flow numbers when it ain't all about how much a head flows. There is more to a badass head than a flow numbers, some high flowing heads are lazy, you wanna make sure you got good air speed and other things but been a long time since I've seen one of these.
@ldnwholesale8552
Жыл бұрын
4V Clevo heads, huge but no airspeed!!
@jasonstormoen
Жыл бұрын
@@ldnwholesale8552 I don't know much of anything when it comes to Ford heads. I am a Chevy guy, but I believe it, there are GM heads that are that way.
@donaldhalls2189
Жыл бұрын
Isn't the strength of the larger valves, why they developed double valves? thank you for the video, all the best to yous and your loved ones
@izzmus
Жыл бұрын
Huh, the video title says SBC but the video thumbnail had a Ford Cleveland head in it.
@WeingartnerRacing
Жыл бұрын
No that’s a Chevy
@izzmus
Жыл бұрын
@@WeingartnerRacing That's the joke
@MrRandy3504
Жыл бұрын
Hey Eric just wondering how important is the vein. Ive got a set of dart 230 sbc aluminum heads i bought used and have been absolutely hogged out and theres no vein. Im going to use them on a 98mm turbo engine so how will this effect power or will it matter as much with boost.
@shanerorko8076
6 ай бұрын
Anyone that claims ford or chev is better has no idea about engines. Any good engine builder doesn’t care if the engine is Kia or Mahindra, they only care about the key aspects of the engine and how it's going to perform. Splayed valves have been around longer than a Cleveland head.
Пікірлер: 316