Very efficient, "but how you senescing that where the ring should throw AND at which direction." also a second query is that : "How far the disk will shoot by this JST-VH to Bullet Connector adapter or which adapter or driver we can use for distance of 7-8 meter."
@dinow269
3 жыл бұрын
Goal
@lileighssorandom2723
3 жыл бұрын
Is anyone watching this who is actually competing in the FTC Ultimate Goal?
@jackgiebe1829
3 жыл бұрын
Yes
@marilynmiles2231
3 жыл бұрын
yes
@yashgupta597
3 жыл бұрын
How did you guys fix the problem of the shooter launching the third ring harder than the first two?
@goBILDA
3 жыл бұрын
Unfortunately that's not something we were able to spend time on... Too many new parts to work on ;)
@huntert3195
3 жыл бұрын
Did you use a control hub or a phone with the expansion hub?
@goBILDA
3 жыл бұрын
For this project we used an RC transmitter and receiver set. If you've got any more questions please give us a call or shoot us an email to tech@gobilda.com
@shivammathur1583
2 жыл бұрын
@@goBILDA wait quick question, what if you don’t use any controller and only use Arduino or raspberry pi instead of the REV control hubs and the expansion and driver hubs
@harishpravin1365
3 жыл бұрын
First
@jayashree5955
3 жыл бұрын
what motors did u use for the intake
@goBILDA
3 жыл бұрын
The Both the top and bottom intake rollers are running on their own 312rpm (19.2:1) Yellow Jacket motor. 5202-0002-0019 www.gobilda.com/5202-series-yellow-jacket-planetary-gear-motor-19-2-1-ratio-312-rpm-3-3-5v-encoder/
@robivadastreanu7922
3 жыл бұрын
@@goBILDA Do these motors have the possibility to be connected to REV Robotics Expansion Hub?
@goBILDA
3 жыл бұрын
Yes! You'll need to use a JST-VH to Bullet Connector adapter. But with that adapter it will work great! www.gobilda.com/2-pos-jst-vh-mh-fc-to-3-5mm-bullet-mh-fc-adaptor-100mm-length/
@HoshiArt
3 жыл бұрын
Tech
@Enderbot1
3 жыл бұрын
Does this robot pass the 16-foot rule? It looks kinda fast...
@goBILDA
3 жыл бұрын
We did a bunch of tuning on the stream to get it under that distance. Primarily by adjusting the ratio of the shooter motor.
@jinanft7564
3 жыл бұрын
I'm Libyan student in this challenge so I need information about build the intak
@goBILDA
3 жыл бұрын
Hello, You can see the full build of that intake in the live stream archives!
Пікірлер: 24