So what was the issue? My light isn’t coming on but i get a red light on the power supply, ive switched xlr cabels and still nothing??
@ApelRecordsTv
2 жыл бұрын
Is there any way to bypass the temperature sensor and make the fans run all the time?
@MankindFilm
3 жыл бұрын
My VL 150 started smoking black smoke during a shoot immediatly when I turned it on, and again when I tested at home, burnt a spot on my carpet. These lights work great until they don't at all....Only owned it for a little over a year and took great care of it. Won't be making the mistake of buying from them again, customer service sucks too. They haven't responded to me on any platform I've reached out on.
@digitalgenre7194
Жыл бұрын
The music is very distracting
@swastik_camera
Жыл бұрын
I am sorry for inconvenience I'll lower it down in next videos
@biawa849
3 жыл бұрын
I like the light quality and body design of VL300. But my VL300 crashed after using it twice. The fan was not working when the light is on, then the light shut off, the red indicator blinks, and the fan started working. I have to restart it time and time again. Finally, the vl300 can't be turned on at all. The control panel looks OK, but the lamp dies. I just bought it for 16 days new. Now I am negotiating with the seller. I don't know what caused the issue. Do you have any idea about it?
@ianmahan3630
3 жыл бұрын
Any update on this? Same thing
@biawa849
3 жыл бұрын
@@ianmahan3630 The seller contacted the factory in China, after 3 months waiting, now the circuit board is on the way. I will update after the repairment.
@haikkavookjian6444
3 жыл бұрын
Mine just stopped working. I am able to power on the controller, but the light does not turn on. I have tried swapping out the XLR cable, but no luck, so I’m assuming the issue is the light.
@biawa849
3 жыл бұрын
Finally, I receive the circuit board, after 3 months. After changing it, the lamp recovery, so far so good. The heat sensor and the fans work fine too.
@KSoul
3 жыл бұрын
Mine just turned off....I'm not even getting the red light on the power block.
@JohnWick-dn6ty
2 жыл бұрын
Any luck opening the light controller? The cord just failing, yet I can't open the controller unit to remove it. Any idea how to open it? Much appriciated
@TheDIYFilmmaker
8 ай бұрын
But, what was the issue? What has you fixed with this video?
@manalivestudios
Жыл бұрын
My Godox VL300 works for a very short time, then the fans come on and the light turns off, while a blinking red light flashes at the back. Does the procedure in the video fix this particular issue?
@swastik_camera
Жыл бұрын
9829309373
@maihelal5391
Жыл бұрын
@@swastik_camera I have a problem on Godox Controller for VL150 LED Video Light and there is a red light on the back what i have to do i am on Dubai I can’t fix it 😔
@Mersynary1
4 жыл бұрын
What’s your info? I have a Godox ad400pro that won’t respond to my trigger
@alexandergomez2188
2 жыл бұрын
Un vídeo que no aporta nada.
@MisraSierra
2 жыл бұрын
Lo mismo pense
@buloveinvideo-art8901
Жыл бұрын
HOW TO OPEN CONTROLLER! I did the same. Tell me next step please.
@kriscaricaturefun9718
2 жыл бұрын
The fan doesn't work, is it damage
@Davidelegni
3 жыл бұрын
Hi Swastik, how to open the Godox battery pack VLC 300 I have broken support rope ! Thanks thanks
@igor_aka_insane
3 жыл бұрын
Ich habe the same Issue
@ahmad17271
3 жыл бұрын
i found the solution
@antanasvarneckas6252
3 жыл бұрын
what solution?
@wtftonyhak
2 жыл бұрын
@@antanasvarneckas6252 It's not that hard to replace the temperature control board by yourself. Just follow the video from beginning up to 2:32, where he unsolder two wires from the circuit. For replacement search for Godox VL300 Temperature Control Board part numbers 127-D193801 or EAN 8718485912238 or D193801.
@testimony-
2 жыл бұрын
??
@maihelal5391
Жыл бұрын
ايه هو الحل من فضلك
@swastik_camera
Жыл бұрын
9829309373
@John-fs9om
3 жыл бұрын
Thanks for the video. I share your frustration at being able to access the internal parts of the light fitting. My problem was a faulty input circuit board. Other technicians should bear in mind that the fans are operated by a thermal switch and only come on after about 5 minutes with the lamp on 100%.
@Mr.Muddiman
3 жыл бұрын
How did you handle the faulty input board? I feel that after looking over mine that it is probably a similar issue.
@John-fs9om
3 жыл бұрын
@@Mr.Muddiman I ordered a replacement board from a Godox distributor. I was told Godox do not hold spares stock and board had to be manufactured especially for me.Took 2 months to arrive.
@vineetharya3254
3 жыл бұрын
Hello John can you help me out, I think I have the same issue
@John-fs9om
3 жыл бұрын
@@vineetharya3254 Hi, Take your unit to professional lighting repairer who should be able to order you a replacement circuit board and fit it for you. I could repair it for you but I'm based on the south coast of the UK.
@nevilguerrameza2888
2 жыл бұрын
@@John-fs9om Good day friend! I have the same problem due to a bad connection. Can you give me the address, page or link of the Godox company where I can request a new circuit board? Thanks!
@javaidanjum7730
3 жыл бұрын
Plz apna concnat no
@swastik_camera
Жыл бұрын
9829309373
@biawa849
3 жыл бұрын
The fan is not working when the light is turned-on in your video.
@kriscaricaturefun9718
2 жыл бұрын
Me too, why?
@Ethan-xo6sg
3 жыл бұрын
My power unit isn't working anymore for the vl300 and the dmx/dc power ports on the v-mount controller are not communicating to the light. I tested the light itself with another unit and it works, its just the power unit and controller that aren't working. Anyone know any repair or replacements?
@Thrillstory
3 жыл бұрын
hey by the power unit do you mean power brick ? Do you get a green light still?
@Ethan-xo6sg
3 жыл бұрын
@@Thrillstory yes, and no my Green light doesn't turn on.
@cooknup215
Жыл бұрын
@@Thrillstory the light on the power brick is supposed to be red or green?
@akhmadrizaldi4608
3 жыл бұрын
Godox vl 300,apabila lampu nyala dalam waktu 3 menit lalu pada saat 3 menit itu lampu mati sedangkan kipas nyala ,kejadian seperti itu biasanya kerusakan terjadi pada komponen apa
Пікірлер: 52