This video is infinitely better than the actual manual for the thing.
@florinG
3 ай бұрын
Thanks ✌️
@kirisgarage8590
Жыл бұрын
Very informative and well explained 😊
@duoimperial4412
14 күн бұрын
Hello, first of all, thank you for all the content you share. One thing regarding this GODOX XPRO II, the modeling icon that usually appears at the bottom right does not appear. Why could that be? Thanks in advance and greetings from Spain.
@florinG
11 күн бұрын
Hi, thanks for stopping by. The icon can disappear when when all groups have been selected and the lamp has been turned off for all. To bring it back on, deselect any group by pressing the ok/ confirmation button and it should appear again. When its back on the screen double press it so that it will show two dashes (- -), after that, select the group you want to control and press the lamp button again now it should show a percentage (XX%) using the scroll wheel you can adjust the percentage to whatever value suits your need. Pressing the button will change to prop/ proportional to the output power, pressing once more turns it off again indicated by two dashes. Deselecting the group and pressing the lamp button again makes all dashes disappear, and you're back from the start. Hope this helps, thanks and best of luck.
@paultolenaar7228
Жыл бұрын
I wonder if using the Legacy Centre Pin Setting, setting the flash to full power , and using the delay timer , could make long burn high sync possible, a trick I used with two X1t's on top of each other. You'll gain almost two stops in comparison with HSS...
@brianrowland9993
Ай бұрын
Thanks for a fairly comprehensive video At one level an amazingly sophisticated controller but not for the faint hearted. And arguably more complex than it needs to be for many users. I didn't see discussion on clarifying a compatible Godox transmitter is required for YOUR camera. Subscribed!
@florinG
Ай бұрын
Thanks 👌
@paulconnors2078
8 ай бұрын
This is/was super helpful. Thank you.
@florinG
8 ай бұрын
You're very welcome!
@madxngai
Жыл бұрын
Nice and informative. How is the dial compared to the previous one? Is it shaky and not firm enough like version one?
@florinG
Жыл бұрын
Thanks for the feedback. The new radio transmitter seems to be better built compared to the older version, however the wheel even though more firm, it does have some give when moved up-down or left right , thanks.
@madxngai
Жыл бұрын
@@florinG thx for your instant feedback
@s87343jim
Жыл бұрын
Actually, has the new version solved the issue of not taking rechargeable AA batteries well due to the difference in voltage?
@cristirenault
Жыл бұрын
No.
@florinG
Жыл бұрын
Hi, sorry for the late reply. So I have shot with the new controller using rechargeable batteries and have not noticed any misfires. I will continue to test it and if anything changes I’ll be sure to update you, thanks.
@xFreyelis
Жыл бұрын
Use 1.5v Lithium Ion Rechargeable Batteries
@geribrn6453
Жыл бұрын
how is the hot shoe compared to the older one? is it using a metal base already?
@florinG
Жыл бұрын
Hi, they’re both made of plastic and both look to be the same, cheers 👍
@frits1463
Жыл бұрын
Selecting the hotshot to only the centre pin solves another problem: With the TTL pins activated the white balance gets too warm. I use a hot shoe splitter for Canon on my Nikon camera and XProN to avoid this.
@caleidoo
Жыл бұрын
This can only be relevant if you don't shoot RAW, but only JPEGs.
@frits1463
Жыл бұрын
@@caleidoo Try it! You can correct it if you shoot RAW (I only shoot RAW) but the WB is of.
@Vicky-il5yv
Жыл бұрын
Nice detailed video!! I have Godox V860 lll flash, looking for a trigger. Seems xpro ll is more closer to mark 3 flashes (newer ones), if I am not wrong. But really thinking should I pick xpro ll or the old version? Locking system attracts me, it's same as my flash V860lll. Is there any major change you see, which I am not convinced?
@florinG
Жыл бұрын
Thanks for the feedback. I think the additional options in the newer version are worth the extra money. In the UK the older version (Godox Xpro) sells for around 50£, the newer version (Godox Xpro II) goes for around 70£, if you don’t need the new features yet, you may find yourself needing them at some point in the feature, therefore I believe the newer one is the better buy, thanks👍
@ranjankmsphotography
2 ай бұрын
Very informative❤👍 Can you confirm if the Sekonic lightmetre syncs only with the one model mentioned in the menu(L 858) or it works with other Sekonic lightmeters too ?
@florinG
2 ай бұрын
Hi, yes that’s the only one compatible ( second version) as far as I’m aware. It syncs with the Seconic L858 provided the L858 is equipped with a Godox module, thanks.
@ranjankmsphotography
2 ай бұрын
@@florinG thank you for your kind response ❤️ One more request 😀 Shall I keep that Legacy option in the X Pro II N, "On" or " Off" ?
@florinG
2 ай бұрын
@@ranjankmsphotography for regular use , I would keep it off, keeping it on disables TTL, and HSS. Now you may be wondering when should you turn it on. You may need it on for fast repetitive burst shots or with cameras that have no Multi Interface hot shoe. In other words most of the times you don't need it on, thanks.
@ranjankmsphotography
2 ай бұрын
@@florinG Well explained 👍 Now it's absolutely clear to me 😀 I will use X Pro II N with my D850 & Z9, so most if the time I will keep it off only. Thanks a lot ❤️
@1redgate8
3 ай бұрын
Love my version 2. Would have got X2T, but gets in the way a bit when shooting and being a bit older now, screen is a bit small. For me, build quality is fine.
@ezhkov_ph
Жыл бұрын
does the autofocus backlight work on mirrorless cameras in the new version?
@florinG
Жыл бұрын
Hi, no it doesn’t not seem to turn on when shooting in low light and the camera is struggling focusing. I tested it on different Sony bodies. I will try and inquire with Godox about this and update you once I find out more, cheers.
@mvjphotographie2617
29 күн бұрын
Hello . Regarding sync between the xpro2 and the l858d can I adjust power control from the xpro2 and it will sync with the Sekonic. Or is this mode the same as the app mode? I prefer setting power with the xpro rather than the lightmeter. Thank you
@florinG
26 күн бұрын
Hi, I’m not shure I forgot, I’ll try it and come back to you, thanks.
@mvjphotographie2617
21 күн бұрын
@@florinG I tried it and it looks like it's the same mode as App. I wish it was bidirectional (change settings from either the Sekonic or the XPro)
@hazybrain7
Жыл бұрын
Thanks a million, this helped a lot !
@florinG
Жыл бұрын
You're welcome!
@MikeT-yy3
10 ай бұрын
😊Has the xpro11 got the new metal hot shoe foot on the Sony model, thanks
@florinG
10 ай бұрын
Hi, I own the Sony version and the foot is made of plastic just like the MKI, thanks.
@SDW2000
4 ай бұрын
One issue I had with the XPro-S was that it simply did not work in TTL mode. Exposure was completely unreliable. At least that was the case with my A74 & A7R4. I would like to know if this problem was resolved with the new trigger. Anyone know for sure?
@MyThrivingMind
Жыл бұрын
Very informative!
@florinG
Жыл бұрын
Thanks 🙏
@rMr.big13
Жыл бұрын
Great video!!….. how do I get in touch with … I have a unique circumstance when bracket shooting with flash
@florinG
Жыл бұрын
Hi Mike, thanks for the feedback, can you descrise your experience while using it with bracket, cheers.
@TuanTran-c5g
10 ай бұрын
The Xpro S shoes snapped for me last week. The quality built wasn't there
@TimKimzey
Жыл бұрын
Great comparison and information - Thank you! Wondering about the new Legacy or Center-Pin setting: in this mode, does it allow the TX to be used across brands (as all use center-pin for the firing trip in Manual)? Seems it would be great to bw able to use different cameras with same controller, obviously without TTL control though. Anyone tried or can confirm?
@florinG
Жыл бұрын
Hi, thanks for the feedback.I never tested it on other cameras, but I believe that it should work. I will put that to the test and let you know, cheers👌
@chargerrtjoe3197
9 ай бұрын
Purchased the Xpro ll paired with tt600 so far so good. Need help to figure for shoot with higher shutter speed. Thanks
@florinG
9 ай бұрын
at the bottom of the screen on your XPro II there a an option named sync press the corresponding button under it. A symbol should appear at the top of the screen, after which high speed sync will be enabled, thanks.
@michaeljemery
Жыл бұрын
Stil waiting for Godox to do the high contrast white on black displays that Profoto use.
@klarion
7 ай бұрын
Im interested in build quality. The first one was very flimsy and was falling apart in hand...
@florinG
7 ай бұрын
Hi, yes it was not very well built. The second one doesn’t seem to that much different, so Godox did pay a bit more attention to the details like better buttons, better lock etc, but the quality isn’t that much improved, it seems more or less the same, cheers.
@TerekkiTerekki
Жыл бұрын
Bought the new version, first shoot tapped the unit lightly against a wall when the camera was on my shoulder and the screen died, seriously delicate, Godox offer to 'sell' me a replacement screen and I have to either replace myself or find someone locally to do it. guess you get what you pay for...
@florinG
Жыл бұрын
That’s very unfortunate. The screen on my Godox Xpro I got scuffed days after just having in the drawer and on the desk. I still think they’re good value,(better bang for the buck compared to ProFoto😅) but I do have to be extra careful with them because they’re pretty fragile.
@TerekkiTerekki
Жыл бұрын
@@florinG yea, got the X2T more robust
@johnmunnoweddings3594
Жыл бұрын
I have the trigger but there is no AF in the menu for mirrorless or digital cameras. Can you comment why you have it on your trigger and I don't have it on mine.
@florinG
Жыл бұрын
If you you’re using the first version of the Xpro it should be the last option in the menu. On the Xpro II it should be the 2nd option on the second menu page. If for some reason, you simply don’t have it may a firmware thing, but I’ll have to come back to you on that, thanks.
@johnmunnoweddings3594
Жыл бұрын
@@florinG Thanks Florin for your comments. No it is the trigger. It is Xpro II. Just bought it. Firmware is version 1.0. AF is not in the menu as an option. It maybe a Nikon thing? Not sure.
@florinG
Жыл бұрын
@@johnmunnoweddings3594 it could be, I inquire with Godox and let you know thanks.
@johnmunnoweddings3594
Жыл бұрын
@@florinG Thank you Florin. I look forward to hearing back from you.
@florinG
Жыл бұрын
I have checked, and out of all the variants the Sony is the one to have this Option in the menu. Olympus/Panasonic, Pentax, Nikon and Canon don't have it. Fuji has an Extra option which the rest don't have as well, called shutter with 2 options either leaf or curtain. I'm yet to hear from Godox, but it seems it's an option only for Sony cameras, because as it turns out Sony changed their hot shoe from intelligent ISO standard, to MI although I don't see it fitting the older iISO hotshoe. Don't think there's anything you need to worry about. It's probably not there because you don't need it, I'll also update you when I hear back from Godox, thanks.
@ovidiusirbu3269
Жыл бұрын
Good❤❤
@JulesMoyaert_photo
7 ай бұрын
🙏
@baddoggi4238
10 ай бұрын
Owned 3 Xpro for Sony. All the mount broke, and the battery lid can drop very easily. Very very bad design. The interface also very confusing. What's worse the bottom mount broke while I took all the way overseas to cover an EVENT, and boy, it really RUINED my overseas trip/event!!! Now I owned Xpro II, which is much better and improved.
@alanplatt888
Жыл бұрын
Excellent tutorial, congratulations.
@florinG
Жыл бұрын
Thanks 👍
@ponyonyo3805
Жыл бұрын
Hello. I am a user of more than 10 godox strobes and I have experienced the problem with the X-pro-s for sony, which gives very under results when using TTL. Also godox seems to be aware of the problem, has this problem been improved in the new X-Pro-s II? That is what I would like to know the most. Could you please tell me as much as you know?
@florinG
Жыл бұрын
Hi, I don’t know what you mean by under result ?
@ponyonyo3805
Жыл бұрын
@@florinG
@SDW2000
4 ай бұрын
Did you find out if the issue is resolved? I had the same problem with TTL.
@ponyonyo3805
3 ай бұрын
@@SDW2000 not yet.
@masoncole23
Жыл бұрын
How does this compare with the flashpoint?
@florinG
Жыл бұрын
Hi Mason, I never had the chance to work with flashpoint products. I live in Europe, Flashpoint are Godox rebranded by Adorama, and intended for the US market. I assume they may ship internationally, but it would be impractical. I’m not saying there aren’t any here in the UK because I don’t know it for a fact, however I never came across any Flashpoint products so far, thanks.👍
Пікірлер: 78