Finally somone who explains how to do it properly !
@ВладимирБерборов
Жыл бұрын
Hi. I have a question. On my, Fabia is set only speed limit. Can I change it to cruise control. The button on the bottom side of the lever is not present
@evakutke917
2 жыл бұрын
Thank you so much 💋💋💋
@MihaiRosu93
4 жыл бұрын
Salut, Vad ca versiunea asta de VCDS, 19.6 iti limiteaza accesul la codari mai profunde in zona de "steering wheel". Incerc cu aceasi varianta de soft sa transform butonul de "voice command" in "mute". Pe alte variante mai vechi de soft, meniul e altfel, nu ca la 19.6 cu control limitat asupra unui Byte.
@joherjojo5723
7 ай бұрын
Hello i did install same clock spring (includes GRA Cruise) for VW Tiguan, cruise shows in dashboard now but not working getting error below: error: P056800 Cruise Control System(CCS) switch/Range performance Any help please?
@allewg71
4 жыл бұрын
Hello. I have a SEAT IBIZA 1.2 TDI 2013 FACELIFT. I have the a module capable for cruise control. If I do this method will it work ? should i put extra cables? Thank you.
@gepetog1617
4 жыл бұрын
THANK YOU MISTER
@NON-01
4 ай бұрын
No work ! Cruise control system 006 Vehicle speed (actual) 0 km/h Pedal monitoring 11001000 Acceleration pedal position sensor 1 (G79) 0.0 % Switch monitoring 00000001
@jinxtuber5113
2 жыл бұрын
hey bro i got some problems, installed the new stick (1K0953513G) and my steering modules (1K0953549 BN) , changed from 0000012 to 0000042 and activated over ecu with 11463 and it was also accepted, now in the measurement blocks is it also detected but it dont get activated. Do you know what can be wrong ?
@desmosediciv4rr
3 ай бұрын
Did you get the fix? I have the same problem
@adriandomaradzki
2 ай бұрын
BN is low line so must change this controller for at least midline
@fredymredy
3 жыл бұрын
Any help so i can fix my cruise control?
@user-bz6bs3yw7d
3 жыл бұрын
I'm doing everything right. Switch metrics are displayed in vcsd. As a result, a mistake (16952 - cruise control switch (e45) P0568-008-implausible signal reabiness ^ 1110 0001). Tell me where to look?
@gabrielbalaban4303
4 жыл бұрын
Big like
@endrejohannessen5697
2 жыл бұрын
Does this method work on mk6 too?
@paweslezak2323
4 жыл бұрын
OEM turn signal stick?
@rstless4059
4 жыл бұрын
My Leon 2.0TDI wont work.. did everything coding wise.. No fault codes
@roybm3124
4 жыл бұрын
RSTLESS Is your steering module CCS capable?
@Scholltyshe
4 жыл бұрын
@@roybm3124 how can i check if my steering module is CCS capable?
@jinxtuber5113
2 жыл бұрын
@@roybm3124 hey bro i got some problems, installed the new stick (1K0953513G) and my steering modules (1K0953549 BN) , changed from 0000012 to 0000042 and activated over ecu with 11463 and it was also accepted, now in the measurement blocks is it also detected but it dont get activated. Do you know what can be wrong ?
@roybm3124
2 жыл бұрын
@@jinxtuber5113 Probably your swcm is not supporting ccs. Rosstech has a list of swcm on their site.
@jinxtuber5113
2 жыл бұрын
@@roybm3124 how do i read that table ? 1K0-953-549-BN Type 2 SW 0100/0101 Midline
Пікірлер: 25