This was a phenomenal video Really helpful to new people such as myself Thank you for taking the time to put this together!
@TheLanesOfficial
3 жыл бұрын
No worries 😉
@ianbarlow7045
5 ай бұрын
Thanks..... A lot of very useful info and very helpful for a newbie like myself
@cookingrillinchillin7096
6 ай бұрын
I use Rinse Aid for the dishwasher, seems to work ok and it is supposed to act as a water deterrent 😊😊
@TheLanesOfficial
4 жыл бұрын
Which is your favourite GoPro mount? Mine is the chest mount 👍🏼
@mysticpresence
Жыл бұрын
Thanks for the info, will be getting chesty and head mount cuz I'm renting the skis I like the lick method and spit n shine lol.
@TheLanesOfficial
Жыл бұрын
enjoy
@lukesmith1463
3 жыл бұрын
Rainex (for plastics) works extremely well in keeping water off the lense imo
@TheLanesOfficial
3 жыл бұрын
Thanks mate will give it a try
@DoAnythingNew
10 ай бұрын
My first jetski ride to Catalina Island and this is perfect! Do you use a water proof case.. I’m using four GoPro 7 blacks.
@andrzejmucha283
2 жыл бұрын
Wax from car wash, Scotch guard or anything which is rain proof product for jacket or umbrella will clean water drops from your lens.
@RoyceMarcus
Жыл бұрын
Thanks for this mate - good tips! Super random question - but how the heck do you keep you hat on while you ski? Mine flies off, even at low speed.
@eliaslarsen3247
4 жыл бұрын
Love your videos 😁👍
@benkarel5269
3 жыл бұрын
A very thin layer of bar soap helps keeping water off as well
@QIK063
3 жыл бұрын
Can put a coat of the ceramic protection or carwax on lense and stays for yeh long time.
@TheLanesOfficial
3 жыл бұрын
I suppose so I haven’t tried that
@colinc7317
3 ай бұрын
Let’s go and see where to put the camera mounts on the ski .. missing!!! The only useful bit not there. Duh.
@lerauxx4532
29 күн бұрын
Hey, i got the 3m adhesive thing with the creator kit. Do i remove and stick it on other parts one by one, or do i need to buy more of those.
@TheLanesOfficial
17 күн бұрын
Yep you should be able to just remove the stick and they are good to go
@CardsXGaming326
2 жыл бұрын
Use shaving cream on lens
@ekendra21
Жыл бұрын
Will the 3M mounts damage the hull/paint job on the ski?
@TheLanesOfficial
Жыл бұрын
Nope it shouldn't
@cmbmusicproductions1870
4 жыл бұрын
How many cameras do you use at a time? One for each mount position? Or do you use 1 camera and move the positions as you ride?
@TheLanesOfficial
4 жыл бұрын
For this video I used just one camera, however if I had a 2nd I run 2 so I didn’t need to move it about. Very rarely do I ever use standard GoPro on the ski as i don’t really like the view. My personal choice for jet ski footage is the Insta360 camera 📷.
@komolatadjieva7620
4 жыл бұрын
Are those stickers safe to use? I’m little worried that stickers might loose tackiness in the water🤨
@TheLanesOfficial
4 жыл бұрын
They are really good but I would change them every few months to be safe, if putting them at the front of the ski find something to tie them down with just in case the sticker falls off
@L0neSurvivoR
4 жыл бұрын
you mean the front mount 3M sticker?
@joshpisasale
4 жыл бұрын
Do the stickers come off if you want to take them off?
@TheLanesOfficial
4 жыл бұрын
No they don’t u would need to use some sort of product or knife to pop them off
@L0neSurvivoR
4 жыл бұрын
SkiBoy3 I think if u remove it u cant stick it again
@ooyginjardl4037
3 жыл бұрын
How do you keep that hat on?
@TheLanesOfficial
3 жыл бұрын
I’m not sure it just fits really well, falls off on the odd occasion
@ethannaka1822
4 жыл бұрын
Bro I have a quick question. If you film everything in 1080 60fps wouldn’t your video timeline be 60fps so slowing down a 60fps to 24fps would look off?? You’d have to shoot the timeline footage at 24fps and then all the slow mo footage at 60fps. Then when you take 40% of that it’ll match up for the 24fps timeline. Is that what you do?
@TheLanesOfficial
4 жыл бұрын
The bottom part of your question sounds right. You want everything on your timeline to match upto the 24fps. So if you shoot the 60 frames you want that at the equivalent of 24fps which is the 40%
@ethannaka1822
4 жыл бұрын
The Lanes - Travel & Reviews but what if you don’t want all of your footage to be solo mo? Can you put 60fps in a 24fps timeline without slowing it down and will it look normal? Thanks. The reason I’m asking is because I’d like to shoot all in 60fps but I don’t want to have to make all of the film slow mo to fit a 24 or 30fps timeline . Not sure if I’m explaining that right haha.
@TheLanesOfficial
4 жыл бұрын
Yes you can put the 60fps into a 24fps timeline and it will be fine. I was talking more about slo mo so people avoid the choppy footage by going to slow. Hope that helps
@martinXY
3 жыл бұрын
I use FCPX, so my answer may only apply to that. If you set up a 30p timeline and drop in 60p, 120p or whatever footage, FCPX will automatically conform that footage to play back at normal speed in your timeline. You still have access to the fast framerate of your original footage if you want to do slomo. Let's say you drop 30 seconds of 120p in a 30p timeline. Play it back and it plays 30 seconds at "normal speed". Then you decide to slow the middle 10 seconds to ¼ speed. Set the range (10 seconds), apply the speed (25%) and now you'll have a timeline that plays back in 60 seconds (beginning 10 seconds, next 10 slowed down to play at ¼ speed, so 40 seconds, then the final 10) and 30fps and looks good doing it.
@TheLanesOfficial
3 жыл бұрын
@@martinXY Correct
@martinXY
3 жыл бұрын
2:35 Well that was a little disturbing...
@L0neSurvivoR
4 жыл бұрын
Thank you ♥
@TheLanesOfficial
4 жыл бұрын
No worries, what ski have you got?
@L0neSurvivoR
4 жыл бұрын
The Lanes - Travel & Reviews Seadoo GTX 215 LIMITED
@Zacharywmaier28
4 жыл бұрын
You should do a video of you do a water wheelie
@TheLanesOfficial
4 жыл бұрын
It’s coming 👍🏼
@tynettleton4040
Жыл бұрын
Is this on the gold coast?
@TheLanesOfficial
Жыл бұрын
Yep 👍🏼 sure is
@ImTSG
3 жыл бұрын
U ever use the suction cup on a jetski? Or is that not recommended 😂
@TheLanesOfficial
3 жыл бұрын
No I haven’t on a spark I don’t think it would work and if it did it would be a huge risk to the life of the GoPro 😂
@ImTSG
3 жыл бұрын
@@TheLanesOfficial ya i didnt think it would be the best idea just thought id ask to see if u have tried 😂. Is taking those 3m mounts off easy and does it leave any damage when taking them off the jetski?
@TheLanesOfficial
3 жыл бұрын
I haven’t taken them off yet so I don’t no sorry 🤦♂️🤦♂️🤦♂️
@ImTSG
3 жыл бұрын
@@TheLanesOfficial all good appreciate the info
@wanderniko
2 жыл бұрын
instead of licking it you can put a little bit of shampoo to avoid foggy lens
@ScottBros
4 жыл бұрын
Sick video !! Great content !! Just subbed and liked!! I upload crazy GoPro edits on my channel!!
@TheLanesOfficial
4 жыл бұрын
Cheers Bro, I’ll check out your content when I’m back from my holiday.
Пікірлер: 59