This is THE guide to help you understand what is needed to undervolt your compatible GPU inside of your laptop. This will help reduce heat and is a great addition to CPU undervolting for near ultimate thermal management!
@Metalingus5150
5 жыл бұрын
Good job as always!
@driftking3686
5 жыл бұрын
Can you overclock and undervolt the gpu at the same time?
@mmmarac
5 жыл бұрын
DK - Color olocolor Yes, you can. Bob explained it in one of his previous videos. I undervolted and overclocked 1050ti on my y530.
@androskris
5 жыл бұрын
So does this replace throttlestop for undervolting? I have the Ideapad 720s you reviewed a year and half ago and throttlestop expired on me a while back so I ignored undervolting. I haven't traveled much for work this year so haven't needed to game on it much. This looks like a lot cleaner solution.
@BobOfAllTrades
5 жыл бұрын
androskris This is for the GPU and ThrottleStop is for the CPU. Reinstall the latest version of TS 👍
@JarrodsTech
5 жыл бұрын
Afterburner needs to be updated so that you can just set all the dots to one value.
@BobOfAllTrades
5 жыл бұрын
Usually takes about five minutes but yeah I agree there is a way by hacking into the registry but I don’t care for showing that kind of stuff on the channel
@ItsDextrin
5 жыл бұрын
Agreed. But you can just apply a -100mhz underclock and then bring up the first dot to your desired value then apply again. You will have way less dots to adjust after if any.
@awsan111
4 жыл бұрын
@@BobOfAllTrades BTW Forgot to update you guys, You can do the following Press on the node you want as a reference for the straight line then press shift and Highlight all the nodes with LMB then press shift + (2xEnter) and it will line them perfectly straight.
@pamysrt8
4 жыл бұрын
@@awsan111 good tip
@8kigana
4 жыл бұрын
@@awsan111 thank you kindly for the tip, really simple!
@NerdMoto276
5 жыл бұрын
"Plan the work and work the plan.", that's applicable to life! Excellent quote! Awesome guide man, very helpful!
@redgle862
4 жыл бұрын
You are a true homie man! Warzone has been kicking my laptop gpu's ass (constant 91 degrees and blue screens galore) but after undervolting the max temp is 80 on both CPU and GPU. Thanks again man!
@NickSteffen
4 жыл бұрын
If you shift then click(click then shift moves the whole curve) on the chart it lets you highlight a range, then if you hit shift+enter after selecting it, you can delete and type in a voltage and it sets the entire range to that voltage, a bit easier than flattening the curve imo.
@snaketto1
4 жыл бұрын
Great video, my GPU was at 85c and it's now at 71c (Hp omen 15) Thanks a lot !
@LucasCarvalho-tz4wy
4 жыл бұрын
which version of the hp omen, friend? i have a dc0xxx and im still getting high temps, did that to a 1070 max q and undervolted the cpu using intel xtu and still getting high temps. any other tips? (already repasted it)
@TheBenjamin911xX
4 жыл бұрын
I have an hp omen 15 too (with gtx 1060) could you just tell me what frequency you put the graph to ? :P
@TheZapidz
2 жыл бұрын
Temperatures went from 86 to 79-81 you're a real life saver. Running a 1660ti nvidia card. I was hesitant at first but after getting the courage to try undervolting there is a huge improvement not only in temperatures but in steady fps.
@gergocsanadi4770
3 ай бұрын
If you somehow still see this or get a notification, may i ask what frequency did you set it to, i did the same as in the video about 1290 and i still get around 85-85 temp.
@robinsantos9971
Ай бұрын
Turn to GOD and repent men through CHRIST, GOD bless you all GOD loves you all, (pray)🩷🩷🩷 Repent=knowing your sin, confessing your sin, realizing your mistakes, feeling actually sorry for your sin, asking the All Merciful GOD for mercy and forgiveness, change your ways John 3:16 For God so loved the world, that he gave his only begotten Son, that whosoever believeth in him should not perish, but have everlasting life. Proverbs 3:5-6 Trust in the LORD with all your heart❤ and lean not on your own understanding but in all your ways submit to HIM and He will make your paths straight You will reap what you sow Joshua 1:8-9 8 This Book of the Law shall not depart from your mouth, but you shall meditate on it day and night, so that you may be careful to do according to all that is written in it. For then you will make your way prosperous, and then you will have good success. 9 Have I not commanded you? Be strong and courageous. Do not be frightened, and do not be dismayed, for the LORD your God is with you wherever you go.”
@irrelvnt
4 жыл бұрын
Hey bob , you can get a static curve in two seconds just click the last dot and then press and hold shift that way you can drag the whole curve down to 1290mhz then press the first dot and put it in 1290 too and press apply will get the jon done thanks for the tutorial
@miguelbotelloor
5 жыл бұрын
Bought a laptop from a Hidevolution after watching your reviews. While I wait for it to arrive your videos calm my anxiety hahaha. Great video!
@samusa4581
4 жыл бұрын
Hahaha same😁😁
@_dwSen5
5 жыл бұрын
i dont skip ads for bob :) tnx for all the info it really helps alot!!
@rmdam
4 ай бұрын
This is a cery good guide, i followed the instructions, without understanding at all, but it worked, I actually increased my FPS and game performance. For reference, I reduced to -45.
@ClassicalPan
2 жыл бұрын
It's definitely an improvement in some aspects, but I would not advise locking the voltage, as this won't allow your voltage to drop below that point even when idling. Ideally what you'll do is start as far left on the curve as possible - in your case, the first node - and raise that node up as high as possible while remaining stable. You'll increase your clock speed at that voltage, and you can flatten the curve after that point so your voltage never increases. No need to place a voltage lock. This essentially undervolts your GPU, as you are achieving clocks that required higher voltages on the stock curve. Of course, every system is different so each person will need to go through some trial-and-error with good benchmarking software and ideally some game benchmarks as well. In my case, I've dropped roughly 10 degrees while under load, while also gaining performance. The reason for the performance gain is because I'm not thermal throttling anymore. It should be noted that I'm using a desktop PC, but lower power is always going to equate to lower temperatures.
@GraveUypo
Жыл бұрын
your post was way more useful than the video. he is underclocking, you're undervolting
@ClassicalPan
Жыл бұрын
@@GraveUypo I'm glad you found it helpful.
@lequinho4
3 жыл бұрын
*If you do not want to adjust every single little dot in order of making a straight line, the tip is typing a negative number (-1 for example) in the text box where it's written "curve" (bellow the core clock adjust) and apply. When you do that all you need to do is just choose only your undervolt dot, make your adjusts, and pressing apply that all other dots will make a straight line automatically.*
@jeffersonsy5471
4 жыл бұрын
YOU"RE MY HERO! It freaking works! I already undervolted my CPU before but never tried the GPU. Now, my laptop runs Assassins creed odyssey at 63-65C, which is an incredible figure. It also cooled my CPU for some reason, maybe it made my chassis cooler because it lessens internal heat circulation. Thank you for this guide!
@BobOfAllTrades
4 жыл бұрын
The CPU and GPU share the same cooler. Draw heat away from one will help the other 👌
@calotanicholas9070
2 жыл бұрын
I will try it in a few minutes. Hope it works too for mine
@boogerz1903
4 жыл бұрын
went from 82-85C down to 74C... this was extremely useful. I have not tested it for long gaming sessions yet but I will in a few days.
@sergiobernaldezloza4194
5 жыл бұрын
Maaaaan! I've been waiting for this!!! Thanks man! Your Throttlestop guide pulled more juice from my Asus ROG GL703! Lets see how it goes with the GPU (GTX1060)!!! Again, Thanks a lot!! Cheers from Mexico! Liked and subbed :)
@TheBenjamin911xX
4 жыл бұрын
Did it work what frequency did you put your curve to ?
@Meteor2046
3 жыл бұрын
The flat curve works! The FPS now is much more stable than before
@gamoosa89
5 жыл бұрын
Sorry if this is a stupid question, if you are only running MSI after burner when plugged in, why do you care about power throttling when stock has higher FPS than after UV? Only to have lower temps and look after the components better?
@buguzzo
5 жыл бұрын
Great guide as always Bob! This help a lot more than undervolting only the cpu since the power draw is a lot lower! I found my 1060 (non max-q) stable at 1544mhz at 0.7V, temperature drops above 10 degree on my acer nitro V15 that got a very crappy cooling system! Now with liquid metal, undervolted cpu and gpu and some cork stoppers to raise the notebook i can finally reach 80 degree under sustained load on both cpu and gpu!
@BobOfAllTrades
5 жыл бұрын
Shared heatsink design can benefit heavily from this 🤛
@dougkomonkeyboy8020
10 ай бұрын
thanks bro honestly laptop was doing my nut in was wating jayz vid about getting more out of the 7000s desktop gpus and he mentioned undervolting i thought to my self could try with the laptop to lower temps and keep performance constant quick google found your vid 10 mins later im running higher clocks lower voltage and lower temps
@sairuthwik7236
4 жыл бұрын
Is undervolting better or reduce the power limit. On my zephyrus g14 I am unable to use power limit or cover voltage. I only have access to modifythe core clock speeds.
@FirstDateFrt
4 жыл бұрын
thankyou so much for this video, couldnt work out why i was gettin constant drops to 20fps (battlefield 5) even when i lowered the res scale. did everything u said and now i can run @ 100% res and never drop below 80fps even in big fights 😁my 1060 laptop was boosting waaay past what notebook check recommends and ran stupid hot. LOVE U, gained a sub here 👍
@swizzy1878
4 жыл бұрын
SAGAWA CEO Masahide Motomura did you make a straight line and do the control L thing?
@FirstDateFrt
4 жыл бұрын
@@swizzy1878 yes ctrl f*
@averaguilar
3 жыл бұрын
I am not worthy damn, after frying a mobo with metal paste (fortunately Dell covered me with warranty), and doing all sorts of sorcery, finally... filanny a workaround that ACTUALLY WORKS to game in this fine machine and not let it go to waste THANKS!!.
@samm7322
5 жыл бұрын
This is an amazing video, thanks so much. The frequency curve is a revelation. An easy way to tell if you are power limiting throttling is tick the "power limit" section in the monitoring tab in MSI afterburner. 1 = power throttling 0=your peachy 😛. A really quick way to check this is to run heaven or something on a loop in the background, open the voltage curve and just choose frquencyand lock it. Check afterburner and see if the monitoring software graph is pegged to "1". If so you are power limit throttling, choose a lower frequency, apply and repeat. Once the monitor is giving you a flat 0, no more power limiting. I have a metabox (read sager/clevo) 2070 laptop. My 2070 power limits above 1575Mhz.
@s.m.shadow7769
4 жыл бұрын
@Sam what CPU do you have?
@samm7322
4 жыл бұрын
@@s.m.shadow7769 hey 9750h is the cpu and 2070 gpu
@SplodgeCDR
4 жыл бұрын
I guess my ASUS GL703GS is not compatible : -[ . This awesome tutorial stopped at 1:20 for me....
@davidesericoli3994
4 жыл бұрын
You made my dell xps 9570 worth for gaming. Thank you very much!!!
@BobOfAllTrades
4 жыл бұрын
Hey you did that so great job 👍
@inyalgaico1563
4 жыл бұрын
THANK YOU FINALLY A 2070 MAX Q VARIENT AND THE GUY EXPLAINS THIS PERFECTLY All these people telling you what to do without really going into why it needs to happen
@inyalgaico1563
4 жыл бұрын
Btw i have a quetion my pc has problems cooling down in the sense it remains at high perfromance even after games are turned off and its in idle how do i fix this
@mohammedfareed1116
4 жыл бұрын
Thank god bro you saved me ....it went from 80 C to like 68_70 C Thank you very much
@way2muchNFO
3 жыл бұрын
Thank you so much! My laptop Is running 20 W cooler! I had no idea you could just set the first one and Ctrl L after amazing and also 7° cooler
@sickmind666666
3 жыл бұрын
I have a Laptop with a RTX 2060 boost clock at 1200MHz. MSI afterburner does not allow me to set a valeu below 1320Mhz, my power wil go just above 80W and so its Power throtteling. How do i solve this?
@singhVarunVikram
4 жыл бұрын
The rest of the explanation was good bob but instead of using a fancy phrase like dial in, if you can clarify what you mean by it, it would help new people more. Let me explain my confusion with that phrase here. So basically dial-in can mean a) reduce the voltage EVEN further at said frequency so it is even lower and hence produces low heat or b) reduce the DIFFERENCE between the stock voltage and your current voltage or in other words, increase your voltage so it gets closer to the higher stock voltage but also gives better performance coz heat is better dissipated. It would be good to know which one you meant by saying dail-in a few times.
@BobOfAllTrades
4 жыл бұрын
The problem with tutorials like these is that 99% of the community wants to just copy and paste what they see on the screen. That’s not how this works. You have to understand the process and do the work for your own machine. Dial it in dude ha ha.
@jorgecosta95
3 жыл бұрын
Thank you Bob, I've learned a lot from you! Jorge w/ ASUS ROG GL703GM from Portugal
@Tebze_
3 жыл бұрын
undervolted rtx 2060 max-q from 1335 to 1320 mhz and dropped 7 degrees, still playing with settings but works amazing!
@vanher282
5 жыл бұрын
Protip: Afterburner wakes up dGPU every 1000ms fot monitoring purposes, even when idle. If you set it to (max) 60s, power drain when unpluged is almost negligible.
@BobOfAllTrades
5 жыл бұрын
vanher282 👌
@mikep1772
2 жыл бұрын
a tutorial for underclocking cpu would be great too, this was a great tutorial
@Zer0megaXX
5 жыл бұрын
THANK YOU so much, i found text guides but none were clear enough.
@FakiuChairo
4 жыл бұрын
Thanks man, i've changed the thermical paste and i dont have any good changes. I undervolted both cpu and gpu now the temperatures are 70 °C from cpu and 75 °C from gpu. My "normal" temperatures while playing MW were 86 °C from gpu and maxium temperature of 100 °C from cpu. Thanks a lot.
@Taraquin83
3 жыл бұрын
I've tested this on 3 laptops now and results are interesting! On 1070 700mv@1500 lower powerconsumption from 115W to about 60W, but performance dropped by 40% so barely worth it. On a 1060 1450@700mv gave about 80% perf at 30% lower wattage so worth it. On a 1650 50W perf was 90% with 1500@700mv, and wattage dropoed from 50W to 35W. Tried my 3060ti desktop with 1600@731mv (below 731mv vram downclocls from 14GHz to 10GHz so not worth it) and perf is 90% of stock with wattage down from 208W peak to 129W peak so 40% reduction. Also tried 5700XT with 1600@850mv, performance was 88% of stock and consumotion dropped by 50%. It seems Turing, RDNA1 and Ampere scales better than Pascal at very low voltage.
@becuasegoodreason
2 жыл бұрын
This video doing "under MHz" ing because of your reducing mhz. under volting is doing same things with lower voltages. therefore doing same things reduced thermals and power values
@Taraquin83
2 жыл бұрын
@@becuasegoodreason Yeah, I know that, my point is that there is more going on than just clockspeeds as going from 1800 to 1500MHz should drop performance by 15-20%, no 40% so atleast on pascal, going below a certain threshold for voltage drops performance more than clockspeed could count for alone, probably due to powerthrottling and wrong dispalyed clockspeed. In Ampere and Turing you can lower volts further before you experience this.
@mihirshinde4268
3 жыл бұрын
Best Gpu undervolting guide ever
@Evan-kj6ye
3 жыл бұрын
Hey, hope you see this but I'm having a lot of difficulties where my GPU will lower its base clock all the way down to around 500-700 MHz from base from clock of around 1100-1260. With boost around 1300-1460 ( I have a 1060 max-q.) This only occurs when I see the CPU power wattage drop from around 17-20 to low 10-15. I have an i7 8750h which is rated at 45W. Im not sure what to do as I've been at this for a week now to no avail. I have also played around with ThrottleStop to limit the CPU turbo ratio to 34 on all cores. I've also messed with the long and short turbos being at 22 and 26 with a limit of 1. I undervolted the cpu at around -.350Mhz on the core and -.125 on the cache.
@naicguybawb1465
3 жыл бұрын
What laptop are u using. Are u thermal throttling or power limit throttling
@Evan-kj6ye
3 жыл бұрын
@@naicguybawb1465 Dell G7. Temps are good at 77c for the GPU, and 78-80c on the CPU. Thing is, the GPU usage is super low when in game but at the rated boost clocks. GPU usage usually sits around 30-60%. If it spikes to above 90% that’s when the clock speeds plummet down to 100-500. I’m noticing this only 1-2 minutes in game. This might be an issue with power limits because thermals doesn’t seem to be an issue.
@naicguybawb1465
3 жыл бұрын
@@Evan-kj6ye Dell Bios is the culprit
@BobOfAllTrades
3 жыл бұрын
If you are only running one stick of memory you need to add an additional stick and you’ll see your performance increase significantly.
@youtubificationizer
4 жыл бұрын
Great video, but what website are you using that gives you the frequency ranges? I can't seem to find that one in particular.
Hello Bob, very informative as always, but is it worth doing if my GPU does not cross 70C? Shame that MSI Afterburner scan doesnt do this by itself.
@gabbean4310
3 жыл бұрын
Late reply, but. It is not, 70 max is actually perfect, it won't damage your gpu and will last a long time, you can lower the curve just a tiny bit if you're uncomfortable with the 70°
@roeebenyishai1320
4 жыл бұрын
Excellently well explained tutorial. Thank you very much
@ACE112ACE112
5 жыл бұрын
It would be cool if you could ask Eluktronics to review its Mag-15. It looks like a pretty good laptop but I'm not sure about thermals. I watched Dave2D's review but Dave doesn't know much about thermals.
@jchea1764
2 жыл бұрын
another video asked me to the pull up the frequency graph at a lower voltage than original, and this one asks me to just pull the whole graph flat at the lowest frequency. NOW I'M REALLY CONFUSED..........
@BobOfAllTrades
2 жыл бұрын
That means there’s options
@IqbalEfefJr
3 жыл бұрын
Still a little bit confused, i have similar gpu but mine is rtx 2070 non max q . The laptop is MSI GL65 9SFK
@meerundjameel5065
2 жыл бұрын
Hey, i cant get my MSI OC scanner to run. there is no test button.. only run and when i run it. it failed, how can i fix this
@inconnu_connue
2 жыл бұрын
For my I undervolt and overclock my 1660ti from 1840 maybe to 2025 and up to 2040 over it crash and overclock my Vram from 6000 to 6350
@samithranramesh
3 жыл бұрын
Hey man plz help me . I have the acer Helios 300 (2019 model) I have the i7 9750h and rtx 2070 max q . In the wininfo64 , it shows my GPU is running at 21 watts stable. it's very low for a GPU . How can I increase the wattage consumed by my GPU. I didn't do any undervolt to my GPU. Plz help me🙏
@NawrasEpicDuel
4 жыл бұрын
I tried to set it in a straight line from the same point of my clock speed (was from the beginning) and my PC crashed. What I did is I instead set it to a straight line from 875 mV and it worked. I also slightly increased the frequency than what was stated with no issues.
@valcal2086
5 жыл бұрын
learned some useful things from this video. keep it up man
@Wailky2008
3 жыл бұрын
Sad. Not compatible for me... gotta stuck with the stutters and 13-15 FPS...
@LatifKocak
3 жыл бұрын
So do we just make the line straight?
@3XH1L
4 жыл бұрын
when I apply the settings the frequency graph goes back to default and nothing changes, using a Nvidia p520, can I not change it?
@flashback6400
4 жыл бұрын
Thanks for the in depth explanation on power limit throttling it showed me a new way of overclocking, But I have two or more question? -I have a head room for temperature in my GPU (full load at 60-65c every game) but could not figure out how to remove power limit throttling without decreasing my clock speed with the voltage i gave it? I am asking this because I want to know if it is possible or not? Or is it dependent on the manufactures setting that is reducing the possibility of me getting a higher clock speed because of the components?
@srinivasarajumudunuri8175
5 жыл бұрын
Hi Bob ( @bobofalltrades), excellent content as usual. An off-topic question(s), I purchased OP15+(8750h,GTX1060,16GB) for $799 last year after watching excellent videos of yours on it. Since I live outside US, I have received the laptop back in March (after 3 months of waiting & spending another $200 on shipping & import fee). I hardly ever used the laptop as I had observed two issues with my OP+ immediately, 1) Writing to USB devices connected to USB 2.0 port fails although reading from them works fine. This issue more prominent when making bootable USB from Linux OS ISOs & using 'fastboot' to flash recoveries & stuff to my Android device(I tinker with my Android phone a lot). It's not that it fails to write any data, but it goes upto 90-99% & then fails with a error message (something like device is removed although device is still connected to USB 2.0 port). The USB 3.0 ports on other side works fine with any USB drive, but USB 2.0 port is needed for unlocking bootloaders & flashing stuff to Android phones. Clean installed Windows, updated drivers & even observed same issue from Linux OS installation. Can you shed some light what might be the possible cause & solution (if any)?. I opened up laptop & taken out USB 2.0 module, have observed nothing wrong physically with module or port. 2) I have never used Mechanical keyboard on a laptop before, but I felt this keyboard to be weird. I normally type 45-47 WPM with 99% accuracy (minimum). But on this keyboard, I double type letters many times (keys are too sensitive?!!, if that's the right word). With this both my typing speed & accuracy goes wayward. And sometimes space bar needs to be pressed on specific area(towards centre) for it to register. How easy it is open up the keyboard on OP15+ (hoping that can fix whatever is wrong with keyboard by opening it). And by the way, which one of the following (I can get only get these in my country) is a better thermal paste solution to be used with OP15+?. Arctic Silver 5, Crosair TM30 Performance, Arctic MX-4 2019, Cooler Master Master Gel & Cooler Master Thermal Grease Master Gel Pro. Apologize for the long comment that too on an unrelated video page. Your quick suggestions will be much appreciated. Thanks.
@eymme5571
3 жыл бұрын
I cant see temps in my hwinfo64 in laptop I'm confused
@biswajeetsahoo1998
4 жыл бұрын
How to set a custom curve to default so that after reboot it remains the same throughout?????
@draco4450
2 жыл бұрын
For the hwinfo part do we need to do some type of benchmark test or have it installed for a while first? it seems like it records highest reached with it rather than calculates it.
@neetishpaudel5407
4 жыл бұрын
My 1660ti mobile constantly clocks over 1800Mhz but the temperature never rise above 75 degree. Should I be worried?
@juble7086
3 жыл бұрын
I don't really understand. I look up the "rated clock" of my laptop GPU the "RTX 2070" and it says "2304 @ 1215-1440 (boost) Mhz" but then the curve goes into the 1900s at its end?
@carlitodidthat
3 жыл бұрын
I have the same gpu i think we a supposed to make a str8 line at about 1400mhz. After he starts explaining the other way it gets confusing especially cuz he says not to follow what hes doing cuz he did it qrong smh
@f_aaris
3 жыл бұрын
The RTX 2060 in my gaming laptop is meant to max at 1200 but Afterburner isn't letting me take the clocks that low, it's going back up to something like 1260
@orhansan7
4 жыл бұрын
Great video, but questions! Undervolting can increase FPS? or is better to overclock?
@ACE112ACE112
5 жыл бұрын
I can't wait for the mag-15 review. may you please show the keyboard thermals with the thermal camera
@BobOfAllTrades
5 жыл бұрын
29-31c over WASD and up to 40c in other spots. I’ve been working exclusively with Eluktronics to make sure this is the best the MAG 15 can be. Sorry for the delay but this is for the consumer and not selfish KZitem views.
@becuasegoodreason
2 жыл бұрын
i think this is "under MHz" ing because of your reducing mhz. under volting is doing same things with lower voltages. therefore doing same things reduced thermals and power values
@rodgermurphy5721
4 жыл бұрын
Im new too this....only got into gaming laptops last 2 years because of virtual reality. Some times I feel like these videos might as well be speaking chinese
@eliasmohamad9682
4 жыл бұрын
Just a question, why at 5:17 you said gaming for several hours while all you showed us is a 4 minutes session in HWinfo? would have been better if we saw the result after these hours. Same when you locked the frequency, your timer was minutes only...
@BobOfAllTrades
4 жыл бұрын
Elias Mohamad that’s because I fired up HWinfo64 before recording 👍 You can verify results with your own laptop should you be in doubt. HWinfo64 has been known to trigger weird temp issues on certain sensors on certain laptops so I prefer to use it as little as possible.
@eliasmohamad9682
4 жыл бұрын
@@BobOfAllTrades trying 1400MHz flat curve right now. Thanks for the quick reply.
@BobOfAllTrades
4 жыл бұрын
Good luck my friend 👍
@majupiju2347
Жыл бұрын
great video ;D thx for that! cant wait to tweak my strix :)
@kizunami1985
4 жыл бұрын
My gpu is an mx150 used to have temps that reach 80-90° and the games I play are just light and now it just stays below 60°
@brandongiordano7736
4 жыл бұрын
I have a rtx 2070 max q, I cant lower the frequency past 1350. 1350 is as low as it goes and i see no temperature changes at all.
@mustnottellliess
5 жыл бұрын
This is so much 🥰🥰🥰 Informative thank you
@vigilante9259
4 жыл бұрын
I'm being heat throttling after I undervolt my CPU it fixed it for CPU but now GPU is facing this issue but the thing is my GPU is a MQ card which means it's already running on lower clocks so is it necessary to undervolt it?
@boy638
4 жыл бұрын
Do you have a video on overclocking laptop gpu? And if undervolting & overclocking laptop gpu can go hand in hand?
@connhal1283
3 жыл бұрын
Just for reference is there anyway to reset the curve to its original state?
@Muserker
3 жыл бұрын
So i should luck voltage after i set all dots? Or is locking simplier solution?
@dragosalexpop
5 жыл бұрын
I got a GTX1060 in my laptop and it throttles HARD. Like for whatever reason in the GPU-Z i can see that it's set to 96 degrees as a temp limit which is way too high. And even so, in gaming it goes to 105 degrees when it shuts down by itself. Tried MSI Afterburner but it didn't work. I can't edit the curve or anything. Edited the registry to allow tampering with the curve and set it to 800v and 1400mhz speed. But it doesn't do anything. It still pulls more than 0.8V at load and it still goes o 1800mhz even though its max boost appears to be 1600mhz. At this point it's been sent into service the second time with the same issue... Don't know what else to do or try...
@BVDIH
4 жыл бұрын
Bob, I got Razer Blade Pro 2019 with RTX 2060, should I undervolt CPU and GPU in Synapse Custom or Balanced mode ? Also undervolted GPU and now I need to apply all settings every time I turn on my laptop. Throttlestop is doing everything automatically, I was doing undervolting with your guide. Is there any tips how to do same with afterburber ? Cuz just wanna turn my laptop and play games. I mean its not hard to press couple buttons before launch any game, but as you say - quality of life
@saggitalia6955
4 жыл бұрын
Does this mean if you drop the curve down manually yourself, the GPU isn't locked as it would be if you try the second method? As in if you're not gaming, the frequency can go below the lowest point on the curve?
@BobOfAllTrades
4 жыл бұрын
Saggitalia That’s correct 👍
@ixmaxwardxi1977
5 жыл бұрын
Why don't manufacturers do all this by themselves!!
@BobOfAllTrades
5 жыл бұрын
They might not know how. It would also have to done in the vBIOS. They won’t use this app because they’d have to pay a licensing fee to MSI 👍
@NerdMoto276
5 жыл бұрын
@@BobOfAllTrades Yes that, but I'd guess in manufacturing these laptops the less variables, the better. The more fine tuning done to one specific item, the more time it'll take to ship each unit and the more cost per unit.
@josue85
5 жыл бұрын
There is a big variance even with the same chip, and GPU types. It's a lot easier for a manufacturer to just set the maximums that will work for everything, (even at the cost of performance), rather than dial it lower and risk some chips malfunctioning and getting more returns. It's all about the bottom line.
@jonhnash2030
4 жыл бұрын
_Not working in my gs65 1070 maxq_ _Same temps and same fps_ And at 1240mhz pop up "power limit" and ¿voltage?
@KavinBh
4 жыл бұрын
Umm Bob, I went into program files of where afterburner is located and found a file named afterburner.cfg It is the file that determines the minimum and maximum values of frequency and voltage to show in the VF curve. Mine was at 700mV to 1250mV, I edited it to show me voltages from 650mV. So that i could edit it to stay within the max-q frequency( mine is a normal 80W 1660ti) due to heating. Is this safe to do? Otherwise the minimum i would be able to go was 700mV at 1335. The frequency usually goes below this frequency on prolonged sessions.
@BobOfAllTrades
4 жыл бұрын
Kavin Bharathi Try it and find out. I usually don’t like to feature that kind of stuff for the channel as it’ll raise too many questions concerns and errors
@JoeMaranophotography
3 жыл бұрын
I managed to get my RTX 2070 max-q to 1515mhz @700mv and around 73 degrees max in Cyberpunk. Not bad.
@BobOfAllTrades
3 жыл бұрын
What kind of temperatures were you seeing previously?
@JoeMaranophotography
3 жыл бұрын
@@BobOfAllTrades 75/76 I guess it depends on what areas of the game. Its a 3-4 degree saving most of the time. My temps were never really high but I do use a cooling pad as well (Dell G5 5500) keeping my GPU cool has never really been an issue as its the cpu that creats the heat in that machine!
@MrFootballfreak18
4 жыл бұрын
If MSI Afterburner would't trigger the dGPU all the time (which increases power consumption and fan speed), then I would actually consider using it...
@BobOfAllTrades
4 жыл бұрын
I only run this program when I game
@ShadowSnipero7
4 жыл бұрын
So this will work with Optimus? Cause I am buying a aero 2070+8750 and I’m going to be using both this guide and a cpu one to get the best thermals and performance without overheating. One more question: could you have put it up to 1350(increase it) and have it be fine?
@btbarr16
4 жыл бұрын
Does anyone know how to unlock the voltage setting for and HP Omen 15 laptop with the 1660ti. I have checked the boxes in the setting menu of MSI Afterburner, but no luck.
@marklois01
4 жыл бұрын
Can i do the same with the cpu? Ryzen 5 3350h because the temperature is getting to 90c
@CultivateAwareness
3 жыл бұрын
The curves are far too confusing on 3000 series laptops. They say they boost up to 1620... when I apply that, it hits a 400 CC overclock?
@BobOfAllTrades
3 жыл бұрын
Dynamic Boost overrides it. I brought this issue as well as other 3k series issues here kzitem.info/news/bejne/sIWpraJubneIanY
@seb42
4 жыл бұрын
So my issue is that I am experiencing rtx 2060 power limit throttling at like 68 degrees, I'm more than ok with taking temps up. Does it make sense to lower the voltage (and thus the wattage) to try to avoid power throttling and achieve higher core clocks? Does that make sense?
@LegalRightz
2 жыл бұрын
my MSI afterburner looks different from this. Doesnt allow me to move dots..
@BobOfAllTrades
2 жыл бұрын
What GPU?
@LegalRightz
2 жыл бұрын
ok i got it. thanks
@BobOfAllTrades
2 жыл бұрын
Oh we both responded within 14 seconds of each other lol
@Tusnal
4 жыл бұрын
you should do a guide to keep cpu and gpu around 70-80º for summer time :)
@BobOfAllTrades
4 жыл бұрын
Gaming Time! ES That’s going to be extremely laptop dependent. Heck, just these guides alone yield very different results for people.
@zukkyun6610
4 жыл бұрын
Hey bob,my laptop has a gtx 1060 and its data looks like this 1280@1404-1670(boost)mhz 192 bit @8000mhz.At pressing my msi after burner,I have seen that the lowest dot is at 1280 mhz but the highest boost is 1670mhz.In the vid your highest boost clock is 1305mhz and you capped it at that.Should I cap mine at 1280mhz or at the 1670mhz? Thanks Bob
@jokessparrow-ch.
4 жыл бұрын
gtx 1650 laptop best setup pls
@ATMG333
4 жыл бұрын
Is it possible to change the watts on the 2070 rtx on a laptop the same as a desktop 2070 ? I manage to drop temperatures to 63 Celsius with your guide
@BobOfAllTrades
4 жыл бұрын
Unfortunately laptops are designed around their components. So if you were somehow fortunate enough to be able to flash a 175 W bios on your machine the components would fry, the power supply unit and everything about the system could not keep up.
@ATMG333
4 жыл бұрын
@@BobOfAllTrades Oh man I was hoping that it was possible to atleast 150 watts since 2080 laptops are set to that.
@momoo5843
5 жыл бұрын
Hey Bob. I have an Eluktronics Mech 17 G1RX with the 2070/9750H. Was wondering if I could somehow send it to you so you can review it
@wikkydoo
4 жыл бұрын
If i follow this on my RTX 2060 and set 1200 mhz the voltage is about .7 but the watts only gets to 60w, even though the vid card is rated at 80-90w. Shouldn't i still be getting the desired wattage--what am i doing wrong?
@BobOfAllTrades
4 жыл бұрын
You don’t have to tank the voltage unless you favor temps. I’d start looking at .850 and 1450-1500mhz and work from there, up or down. Have fun with it 👍
@wikkydoo
4 жыл бұрын
@@BobOfAllTrades thanks, i've been running at 72c without doing any modifications and i don't think that's bad, however my GPU is suddenly experiencing 50% reduction in FPS the last day wo/any other changes, so i thought adjusting this would help, although it doesn't seem like this may have anything to do with my issues?
@stephenwgreen78
2 жыл бұрын
If I set this up under admin will it be active for other users or does msi afterburner need to be started/set by each user? Thanks
@danielharisi6781
3 жыл бұрын
Unit and specs: Lenovo legion y540 i5-9300HF RTX 2060 8 gb single channel ram. My gpu usage is very low. For example if we take Fortnite, my gpu usage is always at 35-40% which causes that i don't get that full experience with the 144hz display. But when I crank the settings all the way up, my gpu usage suddenly rises to 80-98%. In Warzone, which is a high gpu intensive game, my gpu usage is only 50%. This is causes fps drops to freaking 60 fps with everything on low on a 2060! Anything I can do to get the GPU to use its full potential? Please help.
@BobOfAllTrades
3 жыл бұрын
Add another stick of matching memory and thank me afterwards 👌
@danielharisi6781
3 жыл бұрын
@@BobOfAllTrades what will that do? Higher gpu usage?
@rishav0902
5 жыл бұрын
Hi Bob, Which is the best cooling paste ? i have msi GE75 9SG my cpu temps reach 96 but gpu stays at 75 in demanding games should i repaste ?
@dankuraihono600
Жыл бұрын
what's the application to display the top left details @ 8:18
@MrTheraseus
3 жыл бұрын
hi bob! the msi afterburner settings guide link is not working, any ideas what i can do? thanks!
@BobOfAllTrades
3 жыл бұрын
I’m sure if you search for MSI Afterburner settings on KZitem you’ll find my updated version. I’m with clients all day but I’ll try to add this in the description 👍
Пікірлер: 841