In this video I have tested out several grab adhesives, many of which have been recommended by viewers on KZitem. I have done three tests, firstly stainless steel to stainless steel, secondly a grab test to see how well the adhesives can grab (this was originally copied from the Maximum torque video, which portrayed some grab adhesives as being poor, when they were actually good). I then tested out some hardwood blocks which were stuck to the stainless steel, unfortunately the hydraulic ram seals are now passing and so if I perform more tests I will have to repair, or buy a new ram. I hope people appreciate the amount of work that has gone into this video ;-)
The full results of all tests are-
Adiseal £7.86 Maximum pressure stainless to stainless 245 PSI
Maximum pressure hard wood to stainless 3000+ PSI
Supabond £5.99 Maximum pressure stainless to stainless 224 PSI
Maximum pressure hard wood to stainless 1115 PSI
PL premium £12.95 Maximum pressure stainless to stainless 202 PSI
Maximum pressure hard wood to stainless 873 PSI
Tec 7 £14.99 Maximum pressure stainless to stainless 165 PSI
Maximum pressure hard wood to stainless 1016 PSI
HB42 £9.27 Maximum pressure stainless to stainless 184 PSI
Maximum pressure hard wood to stainless 942 PSI
Gorilla grab adhesive Maximum pressure stainless to stainless 166 PSI
Maximum pressure hard wood to stainless 862 PSI
PU18 £5.28 Maximum pressure stainless to stainless 136 PSI
Maximum pressure hard wood to stainless 582 PSI
Saves nails £ 3.87 Maximum pressure stainless to stainless 95 PSI
Maximum pressure hard wood to stainless 411 PSI
Initial grab test, only three adhesives worked but the best was definitely Supabond-
1. Supabond
2. Adiseal
3. Tec 7
You can see some previous tests here-
• The real Maximum Torqu...
• Grab adhesive strength...
• Grab adhesive - grab a...
• Grab adhesive test usi...
Негізгі бет Тәжірибелік нұсқаулар және стиль Grab adhesive tests 2017
Пікірлер: 366