Nice Job Richard, Love the quick and easy fix when you don't want to strip the loco 😁. All the best Tony.
@ThisWayWorksTWW
Жыл бұрын
Cheers Tony, i figured most people might not want to completely strip the locos apart, myself included 🤣, Take Care Rich
@rogerclark5869
Жыл бұрын
Hello Richard Great video as usual. I got my new 90 back from Bachmann after 3 weeks fixed. You have every tool going to fix locomotives Cheers Roger
@ThisWayWorksTWW
Жыл бұрын
Glad youve got it back Roger👍, i fix a fair ammount of things so it made sense to invest in some specific tools to save my hands and fingers the pain! 😁
@Paul-ue3zy
Жыл бұрын
Very interesting, as usual. Hope Crewe works is going well.
@ThisWayWorksTWW
Жыл бұрын
Creweworks is still ongoing behind the scenes 😁, took me a little while to get some electronics worked out but i think ive solved the issue 🤞
@nigeldarl2009
11 ай бұрын
very good info to get the right tools for the job. :)
@ThisWayWorksTWW
11 ай бұрын
Thanks Nigel 👍
@wimbletrain
Жыл бұрын
Hi Rich, excellent video on how this is done. I like the fact that you actually showed a closeup of the split gear. That pinion puller tool makes the job a lot easier, I remember pulling one apart without that and I did struggle. John
@ThisWayWorksTWW
Жыл бұрын
Thanks for watching John 👍, Yeah my pinion pullers so far have had a pretty busy life changing gears. I used to take the wheels off differently too but since i bought the puller ive not looked back, Take care Rich
@clivengauge
Жыл бұрын
Great video very informative thank you for sharing 👍
@ThisWayWorksTWW
Жыл бұрын
Glad you found it useful👍, thanks for watching
@mikeuk1954
Жыл бұрын
Hi Rich. I really enjoy these videos and use them for reference when I have a problem. I have two poole chassis units, a 37 & and 47, and would love a video on installing led's into them. I've already converted them to DCC & upgraded the motors.
@ThisWayWorksTWW
Жыл бұрын
Im glad you like the videos 👍, with regards to your poole chassis lights, are you on about the chassis that comes with light bulbs and youd like to see an LED upgrade? Or did you generally just want to see LEDs fitted as most bodies didnt have lights?
@mikeuk1954
Жыл бұрын
@This Way Works there are no lights on these old poole models. I think it will require holes drilling, etc. I have ordered some pre-wired white led's for the job but will need to purchase some red ones too. Also, really thinking of changing my poole 47 to the police colour scheme so might need to purchase the decals off you. 👍
@ThisWayWorksTWW
Жыл бұрын
@@mikeuk1954 theres a few varients with regards to the Poole bodies, having just looked at a few of mine id recommend starting fitting lights to your Class 47 as its simpler then the 37's. On some of the 37's have the detachable noses and some dont.. with regards to the 47 and 37's though yes your correct with your thinking of drilling holes so the light can come through, then probbaly just black tack the inside of the body behind the LEDs to prevent light bleed within the cab areas.. wiring is fairly straight forward for DC and DCC, the thing to remember though is if you have prewired leds they are normally 2-3v so you'll need at least a 10k ohm resistor for each LED so they dont burn out 👍... Il see what i can conjure up video wise👍
@user-kz7so6nc6q
Жыл бұрын
Great video, thanks again for your source for new gears. Where did you get your gear pullers.
@ThisWayWorksTWW
Жыл бұрын
@@user-kz7so6nc6q Glad you like the video, i got the pullers from Amazon 👍, ive put links in the Video description to the same ones i have👍
@KN-yc8wu
Жыл бұрын
very interesting and helpful, think I'll get a gear puller as it seems such a useful tool. Have you any experience with the earlier GF metal geared 2-axle bogies? I've been given a HST125 set with two power bogies, and a Class 101 3-car set but they are so noisy! If possible, I'd like to change to plastic gears for the intermediate gear sets. Any suggestions please? TIA
@ThisWayWorksTWW
Жыл бұрын
Hi, Yep you need 12T gears for the intermediate gears on those, the axle gears are 16T. these can be found on the "Farish N Spares" website, the shafts on the brass gears do press/push out of the brass gears so you can use them with the plastic gears. Good Luck and let me know how you get on :)
@wasted-blaster.
Жыл бұрын
Can you show to remove the body shell of a graham farish class 66,70 by anychance?
@ThisWayWorksTWW
Жыл бұрын
I can show the farish 66 body removal as i have one of those to hand👍, with regards to the Class 70 though as i dont have one to hand the body clicks on and off the buffers at each end then the body lifts straight up off the chassis like the Class 90 body lifts of in this video, if i do come accross another 70 il post a video of it 👍
@ThisWayWorksTWW
Жыл бұрын
Ive just put a short video up showing how to remove the 66 body 👍
@user-kz7so6nc6q
Жыл бұрын
Sorry Richard
@user-kz7so6nc6q
Жыл бұрын
Sorry Richard should have read your description you gave links to the pinion pullers there. Thanks again for a great video.
@ThisWayWorksTWW
Жыл бұрын
@@user-kz7so6nc6q no worries, they are handy things, i did file down one of the pins i use to push the axles out so it would be smaller but its been a great tool and its seen hundreds of gears and still going strong 👍
Пікірлер: 26