Full review with specs and pricing: www.gbgunsdepot.com/post/grand-power-p45l-full-size-45
@mikes1172
Жыл бұрын
Ah, I'm a dealer with Global Ordnance and I haven't been paying attention, apparently missed the pistol I wanted. For those of you who haven't handled a GP pistol your missing out. I have some pistols that costs 4-5x as much and the trigger in a GP is better than 90% of them. I ordered a GP X-Calibur for a client "he said surprise me, pick what you think I should by. Meanwhile, he ordered a SIG 10mm Hunter Elite, both pistols arrived at the same time for transfer. He was more than pissed to realize a $750 pistol which had a DA/SA trigger had a better SA trigger than his SA 10mm pistol. Also, he spent like $1800 on that darn gun, what a scam. As Graham, demonstrated the re-assembly on these pistols, will make your want to throw it across the room. I didn't watch a video or read anything just went for it and it took me 45+ minutes the first time, 2nd time, 1 minute, its was a training issue. GP's are also accurate, my HK P30L struggles to keep up.
@RedEyePergo
Жыл бұрын
I wish grandpower would come out with an optic ready model with stippling. That would be the perfect gun
@frankbrowning328
Жыл бұрын
Overall I really like this pistol and would like to have one. Except, I'd have to work on the top of the slide to remove all of those milling cuts. A flat top and rounded edges would dramatically improve the look of the top of that slide that currently looks (to me) like unfinished machining.
@Strange84
7 ай бұрын
Looking forward to getting my copy! Going to run 45 super in it. Should be great with that fully supported chamber.
@JJoker69
Жыл бұрын
And...... after your guidance on short barreled 'SPA' 45 XDS , thanks...I did find Nosler and Hornady " my preference " fit my edc needs as a backup for my 9mm .. . Thanks for the insight
@v.german11b
Жыл бұрын
Very impressive. Unorthodox design. It can be easily carried on an OWB holster under Texas Constitutional Carry Law. Thanks, GB!
@Lakanen263
Жыл бұрын
This one doesn’t really interest me but I will watch the video,comment and give you a thumbs up thanks for all the work you do.
@GBGuns
Жыл бұрын
Thank you
@alancarr3381
Жыл бұрын
Thanks for the video.
@Mrgunsngear
Жыл бұрын
Interesting
@cliffordmurdock2407
Жыл бұрын
Speaking of the front sight, I got one for a CZ p01 for my P1. I had to file the notch in the bottom of it so that the roll pin would go back in & hold the sight in place.
@GBGuns
Жыл бұрын
Yes, that seems to be what has to be done with most.
@hivelsword
Жыл бұрын
I posted before you mentioned barrel length. I agree. Personally I won’t go shorter than 4” for a compact and anything leading up to 5” with a preference for the latter. I’m sure the 3 and 3.5” .45’s will still save one’s bacon but I feel more confident with a minimum of four inches .
@GBGuns
Жыл бұрын
Yes, of course no one wants to be shot with anything, but there's something to be said for using the barrel length the round was designed to perform in. There are loads out there now intended for short barrels, but in general it's 4" for 9mm and 5" for 45 acp.
@shawnmrfixitlee6478
Жыл бұрын
WOW 😲, What a great gun..Can't wait for range day ! I to love Grand Power , That one is going to be so much fun..👍👍
@GBGuns
Жыл бұрын
You can see the range video in the linked article.
@shawnmrfixitlee6478
Жыл бұрын
@@GBGuns AWESOME, Thanks !
@JJoker69
Жыл бұрын
As a "novice" to higher end firearms.... I like them plain and simple 😌.... that work 🤨.... the GPs look like art
@GBGuns
Жыл бұрын
Is it novice taste or expert taste that isn't distracted by fancy visuals?
@shawnmrfixitlee6478
Жыл бұрын
@@GBGuns Expert taste !
@hivelsword
Жыл бұрын
Some people might wonder why some double stack .45’s hold only 10 in the mag when others hold 12, 13 or 14. It’s the width of the magazine. The 10 rounders like the S&W M&P, the Ruger SR45 and Ruger American, the discontinued SIG P227, the CZ 97b and the HK45 use magazines the same width as a 9mm double stack. So being narrower means the staggering of rounds is steeper. Less room for fat cartridges. I learned this a long time ago when HK introduced the USP 45 Compact. It held 8 rounds in the magazine and I wondered why it was a 4 round difference between the full sized USP and the Compact. I was expecting it to hold 10 for the shorter magazine. Well, my lgs had the Compact so I brought my full sized USP .45 mag and compared. Clear difference in width. So when HK created the compact they decided they wanted to do more than “chop” the slide length and grip. They redesigned the Compact to have a narrower grip for a better feel. The “mid capacity” .45’s tend to feel better in most shooters hands but there’s no free lunch. Fitting more hands means fewer rounds. Anyway, that’s my long-winded explanation.
@jonn8163
Жыл бұрын
Still kicking myself that I didn’t pickup a GP when Global Ordinance had that crazy sale. Nvm I see they still have some great prices
@AKS-74U
Жыл бұрын
Really hoping they eventually bring in more P40's in .40S&W. Love the 10mm P40L, but I'd do dirty things to add a .40s&w P40L to the collection.
@InvidiousIgnoramus
Жыл бұрын
There are some non L P40s in .40S&W in stock right now.
@AKS-74U
Жыл бұрын
@@InvidiousIgnoramus nice. Actually hadn't noticed that, must be recent. I wonder if they'll do any L models in .40
@RouterSystem-70
10 ай бұрын
Are grand powers still using milled hammers or are they MIM now? Great video btw, thanks.
@five-oonsene545
Жыл бұрын
I have several of these and the only knock i have on all of them is the cheap, too short plastic trigger. You can get a very nasty pinch between the bottom of the trigger and the trigger guard. If someone would make an aftermarket trigger and hammer for these guns i would buy one in an instant. My Wife, with her small fingers refuses to shoot these now because of the nasty cut she received when her finger got trapped between the bottom of the trigger and the inside of the trigger guard.
@e-ay5585
Жыл бұрын
Great Video! Any idea when Global Ordnance will import more decocker models?
@GBGuns
Жыл бұрын
Folks need to tell them they want decocker models. I tell them but I'm only one voice.
@e-ay5585
Жыл бұрын
@@GBGuns Emailed them just now!
@JJoker69
Жыл бұрын
Interesting the slide shape... being from Ohio and worked next to the Goodyear blimp hanger.... the original one..... same shape, sort of.....
@GBGuns
Жыл бұрын
Haha, I could see that, and most folks think it's a huge honk of metal, but as you see when we field strip it, Grand Power has removed most of the metal from the inside, leaving only what is needed.
@stephanieroberts1394
3 ай бұрын
I wonder if Grand Power will come out with a .45 in the MK23 series.
@GBGuns
3 ай бұрын
They likely will as they had one for the Mk12, but I don't think wellsee it in the US
@thomascozart1095
Жыл бұрын
Does GP offer any optics cut models?
@GBGuns
Жыл бұрын
Not currently in the US
@thomascozart1095
Жыл бұрын
@@GBGuns Thank you. The downside of my old-man eyes is the need for optics.
@mikesuch9021
Жыл бұрын
If the barrel is under 5 in it is not a long slide it is a standard slide.
@ecobasetech4558
Жыл бұрын
Is there a 9mm version of this pistol? I think it would make a good companion side arm to my stribog pcc
@GBGuns
Жыл бұрын
Yes, we've covered most of the models available in the US, you can see a breakdown of them all here: www.gbgunsdepot.com/post/the-grand-power-pistol-guide
@Talley212
Жыл бұрын
I want to see if anyone else has had this problem recently. I own a p11 and my mag release from day 1 has been STIFFF and even sometimes sticks where u have to press it from the other side to release it. I sent it back to global ordnance and all they did was slap the X Trim over sized mag release button on there basically saying “we found nothing wrong with your mag release and put the larger button on for those who have trouble with pressing it” Does anyone else have trouble with their grandpowers and having a stiff and even sometimes sticky mag release? Like I’m no wuss I’m a mechanic, young, and been shooting for years? I only ask because I’m interested in getting another grandpower but after the response from Global and the fact my first and only impression is kind of iffy with a potentially defective model I’m weary. Also it’s been 2 years So it’s def not a break in thing either.. I just want to see if this truly is the norm or if I got the short end of the stick. Maybe it’s only the newer models?
@angelobartolomeu5679
Жыл бұрын
Does it handle 45 super?
@GBGuns
Жыл бұрын
I don't know
@newpeupyoass
Жыл бұрын
Realistically, yes. You may need a heavier recoil spring. This patern of handgun comes in 10mm, which is a much higher pressure cartridge than .45 or .45 super.
@armedreptile7889
Жыл бұрын
Do they have any plans on importing the recover models again?
@GBGuns
Жыл бұрын
If you mean the decocker models you'll have to tell Global Ordnance you want them.
@franknapolitano9144
Жыл бұрын
The Grand Power line is still not ready for optics.
@GBGuns
Жыл бұрын
It is, we just don't have those models in the US yet
@9mmpeter255
Жыл бұрын
Reminds me of those cheap sar pistols
@GBGuns
Жыл бұрын
How so?
@v.german11b
Жыл бұрын
A prejudicial view?
@GBGuns
Жыл бұрын
I've found that typically when someone makes a negative statement without basis they don't come back to explain their thought because they haven't got a reason.
@v.german11b
Жыл бұрын
First, Sarsilmaz SAR does not make "cheap" handguns but good quality affordable handguns. Second, Grand Power is NOT cheap. The quality is there, and the performance is on record. Some people throw 💩 hoping it will stick.
@9mmpeter255
Жыл бұрын
@@v.german11b did I hurt your poor wittle feelings trashing your cheap garbage pistol? 😢
@Whitefeather83
Жыл бұрын
what is is handle on rumble?
@GBGuns
Жыл бұрын
rumble.com/user/GBGunsRumble
@Whitefeather83
Жыл бұрын
@@GBGuns thank you
@Captain_Jackass
Жыл бұрын
Nice to see I was yet again “accidentally” temporarily unsubscribed by an unknown entity. Certainly not by youtube as that’s not something they do
@GBGuns
Жыл бұрын
No, of course not.... just every time we publish a new video (twice a week). Welcome back!
@Captain_Jackass
Жыл бұрын
@@GBGuns Haha😂 Thanks good to be back! Keep up the great videos. I’ve got a list of youtubers I have to check regularly if I’m still subscribed to😅
Пікірлер: 69