Dan Gelbart has a video on "coatings" where he talks about how you can get paint. powdercoat and etc to stick really really well with either sandblasting, torching the metal, or cleaning the surface with ajax or comet. This removes any microscopic films or drops from solvents which can eventually lead to the paint coming off more easily than it needs to. Maybe something to give a try.
@ScoutCrafter
4 жыл бұрын
You are so right! I saw that video when it first came out! Dan is super knowledgeable and does a great job explaining what makes coatings "stick" I suggest anyone who hasn't seen Dan's video watch it! kzitem.info/news/bejne/2W2l1I59qqSKrI4
@Herndon_Vinyl
4 жыл бұрын
Dan's video is eye opening. I wish I knew that material sooner in life. Dan is a genius.
@lwoodt1
4 жыл бұрын
Only ScoutCrafter can make a crowbar look good enough to hang on the living room wall.
@MarkH10
4 жыл бұрын
If you are as old as Scout Crafter and I, then this will make sense. Lee Iacocca recently passed. He would greatly appreciate this crowbar, for obvious reasons.
@ScoutCrafter
4 жыл бұрын
Lee saved Chrysler with innovative designs and old fashioned customer service...
@MarkH10
4 жыл бұрын
@@ScoutCrafter His weakness was cringy chrome grills. Even plastic, if you recall. Chrysler design studio only groaned when visits were scheduled because he would always find a chrome suggestion. Mustang, Pinto, Kcars, Minivans........all Iacocca. He campaigned for $1.5bn in loan guarantees from the US. Committed to 11 year payback. Only ever used $1.2 bn. Paid back in 4 years. He was a true American car guy's hero. " If you can find a better car, buy it!" Put the restoration of derelict Statue of Liberty, and Ellis Island back together. Under budget, with a fine job of course. Just like Scout Crafter restores so wonderfully.
@lotsabirds
4 жыл бұрын
Two Things....I remember that polishing compound!! And...That crowbar looks like a presentation piece! AMAZING!
@ScoutCrafter
4 жыл бұрын
Hi Bill! I loved all the No.7 Products! Now with clear-coat they have become pretty obsolete. =)
@BradsWorkbench
4 жыл бұрын
Yes the fiber wheels are pretty awesome. They can definitely heat up what you're working on though
@ScoutCrafter
4 жыл бұрын
Brads Workbench You are so right! Between that and buffing I have burnt my fingers more then once!
@joeheilm
4 жыл бұрын
You are exactly right, the fiber wheel compliments a good wire wheel. Great restoration, I was happy to see the Scoutcrafter red embellishment. Great stuff! Cheers
@ScoutCrafter
4 жыл бұрын
Joe- Everyone has you to thank for this!
@lewiemcneely9143
4 жыл бұрын
The fiber wheel has the same texture as the green wheels that sharpened carbide rock drill bits. I ended up with a cheap crowbar from somewhere but do most of my prying with old shovel handles that have been BLO'ed. Nice finish for sure and HI, Smiley and Thanks CS!
@michaelpugh4894
4 жыл бұрын
Beautiful restoration on that crowbar.
@shedmanx3640
4 жыл бұрын
Absolutely love those fibre wheels. You’re right, they are a game changer. I have an old wire wheel my Dad bought about 55 years ago. I still use it as it’s a lovely soft steel brush. It has never lost a wire but is worn down almost to the hub, so not quite as soft as it used to be. Love your work John. Thanks. 🇦🇺👍
@ScoutCrafter
4 жыл бұрын
Awesome! Thanks!!!!!!
@rawbacon
4 жыл бұрын
I guess I've been using fiber wheels for at least a decade and you're right they're a game changer. There's something almost magical about an old high quality steel crowbar, I'm sure Grandpa would be thrilled if he could see his now.
@jimmac1185
4 жыл бұрын
Being an electrician, I can tell you that the utility company is only responsible for the service conductors to your house. Anything after that is the responsibility of the homeowner. Great video as always!
@ScoutCrafter
4 жыл бұрын
Hi Jim! Yes! Our service here in the city is underground from the pole to our house... Anything inside the house is our problem but this is Con Ed's problem as the water is entering their end of the service pipe! =)
@jimmac1185
4 жыл бұрын
@@ScoutCrafter OIC, yes that is a problem. In certain situations the water can travel uphill with the wires!
@scroungasworkshop4663
4 жыл бұрын
Hi Scout, a couple of things to note about the fibre wheels. They come in a variety of grades from 80grit right up to 1000 grit. They are also available for 4 & 5 inch grinders. And finally they make a hell of a mess but the results are worth it. I have connected up my 4” ducting system to each wheel and that has made a huge difference. Great work on the crowbar. Cheers Stuart 🇦🇺
@ScoutCrafter
4 жыл бұрын
Hi Stuart, You are right about the mess! LOL!! They are worth it!
@alexstools
4 жыл бұрын
That electrical box looks so scary!! That would probably keep me up at night.. I've been thinking a lot about the fiberwheel since Joe showed it, but I really think it is time to order now...so you're definitely not the last! Thank you so much and I look forward to wednesday!!
@ScoutCrafter
4 жыл бұрын
Alex Schouwenburg Buy one and you won’t regret it!
@jbiz8450
4 жыл бұрын
Nice job. That's the most polished crowbar I've ever seen!
@Tiemmy523
4 жыл бұрын
Excellent looking, and your grandfather would be so proud of you John for refinished it as well. Keep up with your great work on everything you do as well John 👍😄♥️
@daveogarf
4 жыл бұрын
ScoutCrafter, you are phenomenal in your knowledge of abrasives and polishes! I've/we've learned so much from you over time! THANK YOU!
@jamesmclaughlin5610
4 жыл бұрын
Afternoon, well you just rendered that crowbar a museum piece... I’ll bet you think long and hard about using that... none the less it’s the best I have ever seen.... thanks for all you do... happy holidays... James
@ScoutCrafter
4 жыл бұрын
James, I have about 20 crowbars, I’m a nut for them! Two years ago I was at a Tractor show and a guy was selling a whole bucket of vintage crowbars for $1 each! It took all my will power to walk away! 😃
@jamesmclaughlin5610
4 жыл бұрын
ScoutCrafter ....Just Walk Away...🤗
@elsdp-4560
4 жыл бұрын
THANK YOU...for sharing. Watched and very much enjoyed.
@darrinlawton2748
4 жыл бұрын
Grandpa would be proud.....cheers mate.
@805ROADKING
4 жыл бұрын
I have one of them Cast arbors, I think it's iron from the 40's-50's it's a Craftsman, it's about ready for some bushings!! I also picked up one of the Stanley 500's because of you!!☺
@ScoutCrafter
4 жыл бұрын
805ROADKING hey King! That little corner vise is super handy!!! Well made too! 😃👍
@philparker1666
3 жыл бұрын
I pride myself on being good with an angle grinder but you truly are a master Scoutcrafter 👍
@j.madone7819
4 жыл бұрын
I have hundreds of hours on the bench grinder and have never used or even heard of a fiber wheel. I'll be trying one for sure. Nice job on the crowbar and the Bridgeport "Hooker" is a really nice piece!
@ScoutCrafter
4 жыл бұрын
J. Madone Jesse the fiber wheel is a game changer! I wish I would have tried it earlier! 😃👍
@357magdad
4 жыл бұрын
Getting a couple fiber wheels is on my list of things to do! I'm gonna keep my eye out for another 6" grinder at the sales so I can have one dedicated to coarse and fine wire wheels and one dedicated to a fiber wheel and buffing wheel combination.
@MadStiles
4 жыл бұрын
Before I started restoring tools I had like 6 bench grinders I sold them all last year kept two and now I need a few more LOL
@357magdad
4 жыл бұрын
@@MadStiles I could get a new one at Harbor Freight for about $40, but I'm hoping I see a better quality used one for less than half of that.
@MadStiles
4 жыл бұрын
@@357magdad me too buddy. I hate spending money there, just feels so unpatriotic lol I'm thinking of making one as I'm pretty sure I have a couple of motors sitting around.
@ScoutCrafter
4 жыл бұрын
357magdad multiple motors are a must, changing the wheels is a drag! 😃👍
@DavidPlass
4 жыл бұрын
What? No Flitz comment? :-P
@johnkelley9877
4 жыл бұрын
That was a great Mosh ScoutCrafter! The tutorial on the wire wheels was helpful and the crowbar looks great. Thanks for sharing this.
@Resto-Rob
4 жыл бұрын
Great show! I like the fiber wheel and don't know why it took me so long to get one. The crowbar looks super! 👍
@ScoutCrafter
4 жыл бұрын
Hi Rob! You and me both! It really is a must have for our hobby!!
@brianmcguire5005
4 жыл бұрын
Awesome job John! That crow bar is one of the nicest I have ever seen!!
@helpinghandremodeling3755
4 жыл бұрын
Very nice looking crowbar. I have a few fiber wheels and lovem
@artsietopology
4 жыл бұрын
That crowbar really came out slick. - Kathie
@MrDoeboy356
4 жыл бұрын
Reminds me of the three stooges episode. This house has sure gone crazy! Water? Turn on anything you’ll get it!
@ScoutCrafter
4 жыл бұрын
MrDoeboy356 LOL- I remember that episode!
@MrDoeboy356
4 жыл бұрын
Lol
@guataco
4 жыл бұрын
Thank for the info. And your grandpa is proud. Nice finish.
@TomGunnTools
4 жыл бұрын
Best looking crow bar I've ever seen! Nice job
@ScoutCrafter
4 жыл бұрын
Tom I have a sweet Titanium crowbar too!
@jessjulian9458
4 жыл бұрын
Thanks my friend. I do enjoy watching your videos. Hope you have a Marry Christmas and the best ever new year.
@Everythings_Adjustable
4 жыл бұрын
I think Joe has shares in those wheels we all have one now 👍 😁
@Resto-Rob
4 жыл бұрын
Or at least Joe gets a kick back.
@joeheilm
4 жыл бұрын
Lol....I wish 🤣🤣🔧🔧
4 жыл бұрын
Water dripping out of an electrical box would scare the life out of me. I must by a fibre wheel and try it it out.
@mazdarific1726
4 жыл бұрын
I recently had a 6” grinder with a super soft wire wheel and last week upgraded to a 8” bench grinder I bought the harbor freight brass but am looking for something even finer that will almost polish.
@tooladdict7463
4 жыл бұрын
That came out so nice John it should be resident Upstairs The shiniest crowbar north America ✨
@ScoutCrafter
4 жыл бұрын
Thanks Ben! I have a Titanium Crowbar in my dining room! LOL It is super light! =)
@azaleaoutdoors8109
4 жыл бұрын
Thanks for mentioning Joe’s Shop that’s how I found your channel. Keep up the good work.
@ScoutCrafter
4 жыл бұрын
I consider Joe a real friend... He is such a great guy and I love his channel! Thanks so much!!!!!!!!!
@azaleaoutdoors8109
4 жыл бұрын
ScoutCrafter I grew up with Joe and we have reconnected through KZitem. We are talking about doing a collaboration video when he gets settled.
@tomdale1313
4 жыл бұрын
having your tools in such a beautiful condition makes some jobs more about the process as well as the outcome...good stuff (heads up on the brass wheel/magnet stickin duh no wonder the price)
@Rusty_ok
4 жыл бұрын
Joe hooked me up with the fiber wheel also it works excellent on everything. Now I keep a few in my inventory.
@ScoutCrafter
4 жыл бұрын
Rusty Gun I’m always late to the party! 😂
@ArmandoLoni
4 жыл бұрын
You ain't the last, John! I've just ordered mines today! Good ol' Joe 😂👍🏻
@johnburgess6572
4 жыл бұрын
Great work on crowbar !!!
@wayneo7307
4 жыл бұрын
Hi John , Nice Job on the Crowbar . Always Used Rubbing Compound on Cars . Many Years . Good for Getting Out Scratches . But A Paint too. Always Wax After . Knew That. But You're A Good Teacher . No Fiber Wheels Here . Never Tried Them . I Always Look Forward to Your Videos !
@ScoutCrafter
4 жыл бұрын
Wayne! You have to try the fiber wheel! =)
@johnhartley3596
4 жыл бұрын
I’d like you to give the same explanation/discussion for buffing wheels and compounds.
@justafanmarvel9669
4 жыл бұрын
Actually I think he did one already... an older one of his videos you could probably do a search for it.
@ScoutCrafter
4 жыл бұрын
John- Have you seen this video? kzitem.info/news/bejne/rKOes6N9fGpniXY
@denniswhite166
4 жыл бұрын
Your Grandpa would be proud of the job you did on his crowbar.
@SeanKroner
4 жыл бұрын
That crowbar came out looking great!
@tonylenge424
4 жыл бұрын
Good video, learn so much from you. Thanks
@SkyForgeVideos
4 жыл бұрын
Nothing like the feel of "bare" steel! It looks great!
@lordvengerx
4 жыл бұрын
A very good mosh always learning new things. I'd like to say welcome to all the new people. And I have seen a water leak like that before myself scout haha.
@ScoutCrafter
4 жыл бұрын
Lord Venger - It’s always nerve racking when the water is mixing with electricity! 😳
@lordvengerx
4 жыл бұрын
@@ScoutCrafter That it is
@JourneymanRandy
4 жыл бұрын
I have many nail bars that look like that. You do such nice work
@whodom
4 жыл бұрын
Thanks much for the link to the fiber wheel. I had been looking at the name brand wheels which are ~4X the price. That’s a deal!
@ScoutCrafter
4 жыл бұрын
The 3M wheels are the best but super expensive! These work well!
@adude7050
4 жыл бұрын
Great video I love those crate tools.
@ScoutCrafter
4 жыл бұрын
Hi Abe! Most under-rated tool/weapon ever! LOL
@phillipjones1412
4 жыл бұрын
Great video, them USA crow bars can’t be beat for strength. Also that water in your service box needs attention ASAP.
@RRINTHESHOP
4 жыл бұрын
Nice job on the Crow Bar. A little paint would even look good.
@ScoutCrafter
4 жыл бұрын
Randy- Especially clear candy colors! =)
@glengrossnickle4985
4 жыл бұрын
Turned out looking good. Thanks
@mrbenmall
4 жыл бұрын
Yes, I need to switch to the 1" fiber wheel. The 2" versions just get all round on the end. Nice restoration... of course. :)
@wireworks616
4 жыл бұрын
Great restore. Now the crowbar looks too nice to use.
@Michelle-Eden
4 жыл бұрын
Never in my life have I seen anyone restore and polish a crowbar. I don't know what was weirder; you doing it, or me enjoying the process vicariously. If you had added red spiral stripes you could have stuck it in your yard for Christmas.
@ScoutCrafter
4 жыл бұрын
The humble crowbar is one of the most useful and well designed tools ever made yet is always taken for granted... I am a huge fan of all types of crowbars and only wish they were more appreciated for their service! =) Thanks Michelle!
@reynaldovalle1773
4 жыл бұрын
great job on the pry bar.. Scott you're not the last one on the fiber wheel I still haven't gotten one L.O.L but I am going to put one on my list now for Christmas and I'll pick it up gray video. God bless you and your family and friends Merry Christmas everyone.
@ScoutCrafter
4 жыл бұрын
Reynaldo You won’t regret buying one!!!
@reynaldovalle1773
4 жыл бұрын
@@ScoutCrafter Thank you I can wait to buy one 🤗🤗🤗👍
@Brooklyn-bn5go
4 жыл бұрын
Thanks for the heads up on fiber wheels and the link, going to set up my second grinder as a movable one with fiber and wire wheels.
@ScoutCrafter
4 жыл бұрын
Brooklyn202 Vince- I wish I would have tried the fiber wheel sooner! You will love it!
@vlogoween1013
4 жыл бұрын
I’ve been buying Mibro brand wire wheels at Tractor Supply... they have a good selection are competitively priced and hold up rather well
@jeffk204
4 жыл бұрын
Thanks for another great video! Do the fiber wheels require a slow speed grinder? Or can they be used with a standard 6 inch grinder? I didn't see an RPM rating on the amazon listing.
@ScoutCrafter
4 жыл бұрын
Hi Jeff! Good question, I've seen them used on motors up to 3600 rpm but I suggest 1750 if possible...
@seanshields86
4 жыл бұрын
Haha I have a bench grinder very similar to the one you showed in the video... Use it almost daily still going strong.
@Aubreykun
4 жыл бұрын
Another type of wheel I've seen around is a rubber "eraser wheel" which is supposed to do really well at removing sticker and decals. Not sure what else it'd be good at, they seem made for drills. Might work for burnishing soft materials if you can stick a chuck on the grinder arbor or clamp the drill down?
@ScoutCrafter
4 жыл бұрын
We used those at work and they do work for that! It is the same material that standing belt cleaners are made from!
@upsidedowndog1256
4 жыл бұрын
That fiber wheel is similar to the 3M Unitized wheel I suggested about a year ago, only bigger. Nice crowbar resto, been looking for one myself.
@ScoutCrafter
4 жыл бұрын
3M wheels are great but very expensive! =)
@upsidedowndog1256
4 жыл бұрын
@@ScoutCrafter I paid less than 10 bucks for a 3"×1/2" wheel, about 6 years ago. I bought 2, the other has never been used yet. They are much denser than the fiber wheel in this video. Mine is on a 90° die grinder, used for deburring and polishing as well as corrosion, paint, and fueltank sealant removal. In 25 years I have worn out 5.
@jkeips78
4 жыл бұрын
Looks great John. If you can do a piece on your color filling techniques when you can. I have mine but would like to see your process.
@ScoutCrafter
4 жыл бұрын
Man Stuff Absolutely! Thanks!
@drstrangefart
4 жыл бұрын
I still need to pick up some better wire wheels. Among the other things sitting in the shop waiting eternally is a bag of old wrenches and such to clean up and polish. The little 4 inch wheel works, but it's slow. And I have an open arbor on the 2x72 waiting for a job.
@saigaking
4 жыл бұрын
Great video John love that your using the flap wheel more I swear By it I ‘twas very interested in the other wheel that you put on the bench grinder The grey one are they any good and where did you pick them up God bless take care 🛠🔧🇳🇿🇺🇸👏
@ScoutCrafter
4 жыл бұрын
Matt Levett the fiber wheel is awesome! Get one at Amazon- link in description
@MarkH10
4 жыл бұрын
I keep waiting for the day when you walk the selfie stick mounted camera through, and introduce your music room, then continue past the mixing board to the soundproof recording room to announce that you make all your own background music for all your videos.
@ScoutCrafter
4 жыл бұрын
LOL Mark, all the music comes from KZitem creator library! =)
@MarkH10
4 жыл бұрын
@@ScoutCrafter I know. I just looked in that file, and all the highest rated music was submitted by a YT channel named ScoutCrafter!
@bobjoncas2814
4 жыл бұрын
..good info, great vid..
@corydriver7634
4 жыл бұрын
Looks nice I like the red highlights especially enjoyed the shout-out to Flitz.
@mealex303
4 жыл бұрын
Eyy yow pauwly... Yo whats cracking?? Yo bro this guy shallaked this ova ere!!! 🤣 Ohh a Smart guy huh.. I respects that forget abouwdit 😎lol 😂
@Traderjoe
4 жыл бұрын
Check the top of the pipe that your electric comes in. There should be a curved hood that has its opening facing down. It’s caked a weather head. You might need an electrician to make adjustments to the weather head. Con Ed owns the wire leading up to the hook that’s mounted on the house, and then you own the pipe and the wire running down it. They own the meter, but the box that the meter is in is yours and of course, everything after the meter is your responsibility to maintain. Often the serviceman will do you a solid and fix the pipe where it’s connected to the house if he likes you, but he isn’t required to and can actually get in trouble for doing it, but most people would not complain of it saves them the cost of hiring an electrician. But it’s definitely not good to have the water coming in like that and it can damage your meter and give erroneous readings, so I would call them first and feel the guy out. But remember that he isn’t obligated to fix certain things and can tell you to get an electrician. It’s better safe than sorry!
@ScoutCrafter
4 жыл бұрын
Hi Joe! Most electrical service here in the city comes into the house underground from the telephone poles at the street... Con Edison is responsible for this as the water is entering the service pipe at the pole. This isn't very uncommon here as over time shifting polls often open the service pipe enough that water finds it's way in... I have heard that one fix Con Ed does is pour melted bee's wax into the service pipe at the pole creating a seal. I had this problem in 2017 and they said they fixed the problem... Well, I called them back and I am on the list again... =)
@stuartlockwood9645
4 жыл бұрын
Hi scout, grandpa's crowbar looks great, I see you've got the latest watercooled electric supply, all your power tools will be much cooler before long, it's supplied by the Flash Bang electric co, true inovaters in power supply, the only downside as I see it , is the wearing of a rubber diving suit, because of the water you understand, and using wires or pipes to direct the flow of electric is optional . Please let me know what you think of this new idea, I can only imagine it will be an illuminating experience to try. . Best wishes Stuart uk.
@ScoutCrafter
4 жыл бұрын
Stuart Lockwood Flash Bang Electric Co! 😂😂😂😂😂
@danohstoolbox
4 жыл бұрын
Great video john
@MrDoeboy356
4 жыл бұрын
Nice video. I could hear that water dripping in the background.
@ScoutCrafter
4 жыл бұрын
MrDoeboy356 Con Edison has to seal the pole! It’s nerve racking Cliff! 😃👍
@mercuryrising9174
4 жыл бұрын
Brother scout my grandpa told me i was the kid who could tear up a crow bar but i tried it wrung my bell like i never forgot. So you didnt tear up the crow bar either lol
@ScoutCrafter
4 жыл бұрын
I forget what I was whaling on but I buggered it up! LOL Kids!
@mercuryrising9174
4 жыл бұрын
@@ScoutCrafter agreed lol
@patkane5018
4 жыл бұрын
Great vid as always. I think that's the nicest crowbar in the northeast! Almost too nice to use...a presentation crowbar if you will.
@davidphillips6571
4 жыл бұрын
Before crow bars, crows had to drink at home.
@bigmikeh5827
4 жыл бұрын
another super job. Ten minute break. Take it on the way to Lowes. ;-)
@TJB1510
4 жыл бұрын
DID YOU TAKE CARE OF YOUR ELECTRIC SERVICE? WoW,
@ScoutCrafter
4 жыл бұрын
Thank goodness Con Ed did! =)
@TJB1510
4 жыл бұрын
@@ScoutCrafter Had a very similar problem in my house. Insulation on power line had very small cracks. FAILED. Water came down line into box - circuit breakers were rusted. Cost me $1500 to fix. New circuit box and now power line is in conduit. Should have been, it faces the southern sun.
@MadStiles
4 жыл бұрын
Great video buddy very informative! That worn-out wire wheel reminded me of my dog he's kind of old and getting bald and spots LOL crowbar turned out great thanks for the video
@ScoutCrafter
4 жыл бұрын
Madstiles Hi Jim! I remember using wheels that were so worn I needed Kevlar! 😂
@M70ACARRY
2 жыл бұрын
My grandpa would beat my ass if his crowbar had any rust at all. Rust was forbidden. Our house and shop always smelled of camphor.
@larryborkstrom3580
4 жыл бұрын
Looks great the hard part would be using again
@ScoutCrafter
4 жыл бұрын
larry LOL- I must have a dozen! I love crowbars! 😃👍
@paddrivers
4 жыл бұрын
Ejoyed this resto as always SC. Interestingly the slang word for a Crowbar here in the UK is " Jemmy" 🇬🇧🇺🇸😎
@ScoutCrafter
4 жыл бұрын
Phild is that why we say “You have to Jimmy it”? 😃👍
@paddrivers
4 жыл бұрын
@@ScoutCrafter I say old chap I nearly choked on my Earl Grey tea what.😂🏴
@hubertjudeaux7749
4 жыл бұрын
hi real american brushes "osborn" are very good wolfkraft buy in this company i own same pry bar , was my first one
@jeffreyyeater1780
3 жыл бұрын
We call it tooth . it had enough tooth to coat it .
@mealex303
4 жыл бұрын
Ild love you to do a video for me using a brass wire wheel on a project but heat it up first it will pull brass off the wheel and turn the part golden. Im sure alot of people have not seen that and would be interested in seeing a spanner or hammer turned gold in real time. Many Respects ild also love a shout out for the video idea please? 😉👌
@ScoutCrafter
4 жыл бұрын
*Alex* V-i-P Absolutely!
@alansmith4734
4 жыл бұрын
Since the Boy Scouts recalled the neckerchief slides because of too much lead in them, I suspect that the fiber wheels might have lead in them!? Wear a breather mask when in use. It could be worse ... asbestos!!! Dad Joke: Where did crows go for a drink, before they made a crowbar? =P
@mraamohamed
4 жыл бұрын
Hello my friend like the video, always have to add your RED touch.....have a question I have been meaning to ask this for a while after grinding do you damage the integrity of the tool in any way? Also still waiting for a good video on Bit Rust removing......maybe you have a long list. Abdulah
@ScoutCrafter
4 жыл бұрын
Hello Mohamed - Yes it's on the list! As for ruining the integrity not at all, however excessive rust can, if left alone can eventually compromise integrity! I have seen rusty tools snap! Never clean ones...
@jamesbrown-yy1qo
4 жыл бұрын
WOW
@johncrable3349
4 жыл бұрын
Hi Scout - big time bummer on the electrical panel. Is the weather head in bad shape? Be safe!!!!!!!
@ScoutCrafter
4 жыл бұрын
Hi John! My service comes underground from a telephone pole in front of the house... Con Edison has to seal their end! 😃👍
@SachsVDE
4 жыл бұрын
I'm sure that You're wrong John!, Bushings mostly are hard Copper made ,not in bronze..👍
@ScoutCrafter
4 жыл бұрын
Sead Neziri not here in the States, Bronze is the most popular bushing material.
@Everythings_Adjustable
4 жыл бұрын
I think you are mistaken Sead, you could try googling oilite or phosphor Bronze 👍
@SachsVDE
4 жыл бұрын
Sparky 415 Everythings Adjustable Ok I've been mistaken, i see they're in diff bronxe alloys sorry for the hasty comment Thank You..!👍
@Everythings_Adjustable
4 жыл бұрын
No problem, I have worked on machines in the past and many of them had bronze bearings 👍
@mazdarific1726
4 жыл бұрын
What finish does the fiber wheel achieve? Have you tried the nylon wheels?
@ScoutCrafter
4 жыл бұрын
mazdarific The wheels are often marketed as deburring wheels, they do have different grits and work GREAT!
@MrHowieZ1973
4 жыл бұрын
That new weather head will cost you. lol, I thought that would be a Con ED expense but nope. Do you ever do any work with walking canes?
@ScoutCrafter
4 жыл бұрын
Hi Howie- Luckily this is Con-Ed's issue- anything on the pole and underground to the house is their's anything inside the house is mine... =) I use walking canes! LOL
@davidschaer8974
4 жыл бұрын
I'm guessing that crowbar didn't look that good brand new!
@cindiberg7718
4 жыл бұрын
Does the fiber wheel only go on one way or can you flip it?
@ScoutCrafter
4 жыл бұрын
Only one way as the flaps are laid down so they won't tear off when spinning. The best way to buy the flap discs are in bulk as you save a ton of money! If you buy them at home depot they are very expensive!
@marcmckenzie5110
4 жыл бұрын
So relieved you are staying vertically integrated... for a moment there I thought it was going to be grinding outsourced to @Joe's Shop, then wire wheeling to @WireWorks, and then polishing to @357MagDad (as he is currently holding over half the U.S. supply of Flitz), and then of course shellacking would stay in-house @ScoutCrafter! Ha Ha!!
@hiker1392
4 жыл бұрын
Ummm...the water? Maybe fix that? Want to keep seeing you here!
@ScoutCrafter
4 жыл бұрын
I can't touch it as it is Con Edison's responsibility at the pole! =)
@hiker1392
4 жыл бұрын
Wow. I assume you called it in and are on their ‘repair just before the world ends list’.
@christophernewton2579
4 жыл бұрын
You could have used the flap disk to clean up the chowderd areas
@ScoutCrafter
4 жыл бұрын
Hi Chris! Yes! However whenever you have a hard lip it will really dull your flap disc fast! The grinding wheel wears much better for that stuff, then leave the easy stuff for the flap disc./ =)
@christophernewton2579
4 жыл бұрын
Im a retired from fan and welding
@christophernewton2579
4 жыл бұрын
Fab I hate phone keyboards
@christophernewton2579
4 жыл бұрын
Trying to say hard wheel have there place for roughing in but for finishing flap wheels are the first choice
Пікірлер: 191