this video from 2014 literally saved my life on 2020.. thanks!
@sheribottom4247
10 жыл бұрын
I have had the E6000-40 since May 2013. Seeing as it was a demo, I was mising lot of the items. Like the setup disk. And since it was so new at the time, I had nowhere to turn for proper training. I ran across your videos today and you have definitely answered many of my unanswered questions. Like cutting past the set rollers and setting the conditions. Thanks so much!!!
@19ahmet97
Жыл бұрын
nice video, can u show us how we can use perforatet cutting oder working with passmarks ? should i do this settings on the Graphtec for this or on Cutting master or in Illustrator ?
@studiovulcan4411
3 жыл бұрын
Sounds like a silly question but you keep saying "let's go back to the menu xyz" but you don't explain how to go back to the paper loading menu. Do you just have to turn off the machine and turn it back on again if you've already selected 1 2 or 3 and want to go back and change it?
@mikeferretti7422
2 жыл бұрын
What software are you using to send to the cutter?
@1907Syndicate
3 жыл бұрын
Hey I have my media loaded but when I press 2 it says LOAD MEDIA! As if I don’t have media in there, both rollers are aligned where they should be so I don’t understand the error
@mikeferretti7422
2 жыл бұрын
Any reason when I do a cut line which I just create a box and use the stroke for the cut line it double cuts. Cutting the inside and outside of the stroke.
@the-bu3lb
5 жыл бұрын
How do you print media on plain white vinyl.
@paintergirdharipurawa1243
5 жыл бұрын
Very best
@vaniahdez.r.5556
6 жыл бұрын
I HAVE A CE600-60, BET I CAN EXPAND THE AREA AND THE CONTROL PANEL ONLY SHOWS ME 3 OPTIONS: 1.- MEDIA 2.- I / F 3.- ADV. WHERE CAN I FIND THE AREA OPTION?
@arifullas861
2 жыл бұрын
What is the required computer to operate this machine
@tonypspokertable2728
6 жыл бұрын
Is there a reason that when I contour cut it is slightly cutting Into my image. I have had several successful prints and cuts prior to this issue. Please help?
@mediakreasi5706
5 жыл бұрын
I have 2 machine grapthec ce6000 60. It often missing to countour cut over 2mm. Not precicion.
@tc3fngrs1
4 жыл бұрын
When I attempt to load a sheet into the cutter, I select "3-Sheet" in the Load Media window. The cutter rolls to the front, measuring the width, then rolls to the back and returns. Upon returning, it completely loses the sheet, meaning the sheet falls out off the cutter. I haven't found anything that addresses this. What am I missing?
@tc3fngrs1
4 жыл бұрын
@@jotoimagingsupplies i have done "1-Roll Front Edge" but that doesn't give me the length of the material. It only gives the width.
@tc3fngrs1
4 жыл бұрын
What's the purpose of "sheet" if my best option is to choose "roll" in order to make this work?
@elfeo1js
3 жыл бұрын
Make sure there isn't any obstruction to the sensor in the back. I put tape over mine so I know the experience.
@rosannalabang9359
Жыл бұрын
How can we cut on 350 gsm boards?
@UmeshKumar-ft3yt
7 ай бұрын
Sir pls solve my problems in my graphtec cutting plotter CE -6000-60 there is an error is showing that( hardware illegal code ) and machine is stop at that time pls tell how to fix it
@ramesh-dq1st
3 жыл бұрын
I have graphtec ce500 120 I want to try print and cut but the sensor is showing the lights. Anyone can help me to turn on the sensor
@ashumeman1553
8 жыл бұрын
how to load media error issue
@dasarathanv7051
3 жыл бұрын
How mouch rate
@sugihartowarna2045
4 жыл бұрын
Not Simple Operation
@javierpezoa
Жыл бұрын
Hola tendrán el manual en KZitem español
@jotoimagingsupplies
Жыл бұрын
no lo tenemos.
@onofriocannavale740
2 жыл бұрын
salve ho un graphtec ce 5000 -40 mi il pc non mi legge la perifica con codice errore 1004 ma mica sarà l'elettronica della porta usb ? chiedo info
Пікірлер: 30