Learn Grasshopper for Free: http: //www.onehourgrasshopper.com
@josesibi
Жыл бұрын
What stands out from this video and the others is that the logic behind every step is very well explained! Highly appreciate the effort and a big thank you :)
@LineweightsAcademy
Жыл бұрын
Thanks so much, Jose! Let me know if you have any requests for other tutorials.
@laromai2245
4 жыл бұрын
Very good presentation. Straightforward, crisp and clear.
@LineweightsAcademy
4 жыл бұрын
Hi Laro! Glad you enjoyed it!
@abdullahalazwad6273
3 жыл бұрын
It's remarkable that you described in detail how you to do it and why you used each of these steps. This much clarity is absent in most other gh script tutorials . thanks a lot
@LineweightsAcademy
3 жыл бұрын
Thank you Abdullahal! If you have any tutorial requests let me know!
@rshivam10
4 жыл бұрын
Finest Grasshopper Tutorials out there. The video quality, info scipt, Saudi quality, support... all at point !! I thought you had already like a mil susb!! I'll sure we''ll see that count soon! Also you're too awesome to provide support files! Cheers ! Thanks alot
@LineweightsAcademy
4 жыл бұрын
Much appreciated, Shivam! Thank you for your comment...yes I hope we reach a million subscribers as well 😇
@tareefsoufi6541
4 жыл бұрын
Please don't stop ❤❤❤❤❤
@LineweightsAcademy
4 жыл бұрын
Tareef! you are too kind
@kiyaakbari5761
Жыл бұрын
Thank you so much for useful education🙏
@iyellalot
3 жыл бұрын
Awesome tutorial. Thank you 🙏🏻
@LineweightsAcademy
3 жыл бұрын
Thank you! Glad you found it useful!
@tareefsoufi6541
4 жыл бұрын
You're make life more easier not the 15 percent example😂❤
@LineweightsAcademy
4 жыл бұрын
Thanks, Tareef!
@sayaliphansekar4418
3 жыл бұрын
Thank you so much .. amazing explanation and informative video !!!
@LineweightsAcademy
3 жыл бұрын
Thank you, Sayali! Let me know if you have any requests
@cristianvelez6099
4 жыл бұрын
Thank you for your contents it’s awesome 💯💯🙌🏼
@LineweightsAcademy
4 жыл бұрын
My pleasure, Cristian! More to come so please subscribe!
@saidheeraj5511
Жыл бұрын
I haven't found Brep preview parameter in food4rhino
@lukemyers4237
2 жыл бұрын
thank you for this, it was very helpful, but I was left with floating boxes, how do I delete these?
@LineweightsAcademy
2 жыл бұрын
Hi Luke. There are a few methods. One way is to calculate each box's distance from its nearest neighbor using its centroid (Volume + ClosestPoint). If the closest point is larger than the grid length then that means that there is no box directly above, below, or adjacent to that box, in which case you can eliminate it using Dispatch or Cull. There are a couple of other ways such as checking if each face is coincident with another box's face, etc, but those can get more complicated.
@李聃玉
2 жыл бұрын
Hi, your video is very helpful, thanks! can i ask how to build the inside structure using GH or another quick way?
@LineweightsAcademy
2 жыл бұрын
Thanks! It depends. I think you can control the facade quite well using grasshopper. For the inside (structural core, elevator core, etc.) you could use Rhino or Revit. Whichever tool is best for the job, there's no right answer. Ideally, once the form is finalized you could transfer the model to a BIM platform and continue working there.
@scottcallihan1082
Жыл бұрын
Great video. With the Random Reduce at the end of the video, some of the cubes that are added back end up floating/not touching other cubes. Wondering how you would go about identifying or eliminating cubes whose face or edge is not touching another cube?
@LineweightsAcademy
Жыл бұрын
Hi Scott. There is a way. You could run a BREP|BREP intersect command or probably easier is to run a closest point command for each of the cubes. If the closest point is too far from the adjacent cube then you can filter it out. This won't eliminate cubes that are hanging on by a single corner, however. In that case, I would try averaging the distance between the closest 3-4 cubes (ClosestPts) and filter that.
@rashichawla2265
2 жыл бұрын
where is the brep preview that i can download??????
@rashichawla2265
2 жыл бұрын
also how to install it?
@LineweightsAcademy
2 жыл бұрын
@@rashichawla2265 Hi Rashi. You can use the download link in the description to get access to the files. They are all User Objects - all you have to do is copy/paste them into your Grasshopper User Objects folder
@LineweightsAcademy
4 жыл бұрын
Download the files here: lineweights-over-coffee.ck.page/4b3ae2e0c3
@1233Dana
Жыл бұрын
How do you hide elements?
@LineweightsAcademy
Жыл бұрын
Hi Dana. I use Ctrl+Q and also have changed my Ctrl+Shift+Q to "Toggle Preview Off"
@salmatarek1672
3 жыл бұрын
can but this file in 3d max
@LineweightsAcademy
3 жыл бұрын
Interesting, I believe it's possible to export the final file to 3D Max but not the Grasshopper definition.
@jacquelinerojaslino7782
3 жыл бұрын
Where can i download the breep preview?
@LineweightsAcademy
3 жыл бұрын
Jaqueline, there is a download link in the description. You'll receive a DropBox folder link where I have placed multiple UserObjects, including the BrepPreview component. Let me know if you find it.
@jacquelinerojaslino7782
3 жыл бұрын
@@LineweightsAcademy I found it but when i try to use it,nothing happens
@LineweightsAcademy
3 жыл бұрын
@@jacquelinerojaslino7782 you need to place the .ghuser files in your User Objects folder.
Пікірлер: 39