Sir you are the best. I have being wiling to learn rhino for more than a year. And all i got are just speed builds without any explanation. 👌🏽👌🏽👌🏽👌🏽👌🏽👌🏽👌🏽👌🏽👌🏽
@ParametricHouse
3 жыл бұрын
Thank u 🙏
@k_w_s_n
5 жыл бұрын
As a relative newcomer to Grasshopper, this just honestly blows my mind. Parametric generation of organic shapes is seriously amazing to me, especially when it's this simple. Excellent example and thorough explanation, thank you!
@ParametricHouse
5 жыл бұрын
I'm glad you found it useful! Thanks
@FernandoPizzani
11 ай бұрын
Thank you for a great tutorial; very engaging, clear and easy to follow.
@ParametricHouse
11 ай бұрын
Glad it was helpful!
@meta_forma
3 жыл бұрын
Your tutorials are amazing! Thank you for sharing your skills!
@helplin1886
2 жыл бұрын
Thanks for watching!! I've got something really big! i want to introduce you to 🔆🛎 🔔🔔 What’sapp✙①⓸⓶⓷⓸⓪⑤⓷⑥⑤①☎️.
@BATCH3
3 жыл бұрын
Thank You!! specially for the attractor part that was so clever and easy, getting a really interesting effect! amazing job. thanks to you I successfully applied it to my 3d surface, what led to a even better looking effect :)
@bassamahmed5965
3 жыл бұрын
I am a beginner and I want to know how to apply this on a 3d surface Thank you
@BATCH3
3 жыл бұрын
@@bassamahmed5965 I used PROJECT, so I projected this 2d pattern on a 3d surface. Then I baked the 3d pattern and manually split with the surface (I'm a begginer too and didn't wanna waste too much time making it all inside Grasshopper)
@BATCH3
3 жыл бұрын
instagram.com/p/CJYyYuCB5PF/?igshid=169ez6p29pp4a What I did with it :)
@bassamahmed5965
3 жыл бұрын
@@BATCH3 Thank you
@cyberspider78910
3 жыл бұрын
You should have some voronoi facade in your home in background...that gives impact....lol....great going...
@helplin1886
2 жыл бұрын
Thanks for watching!! I've got something really big! i want to introduce you to 🔆🛎 🔔🔔 What’sapp✙①⓸⓶⓷⓸⓪⑤⓷⑥⑤①☎️.
@Diegomagadan
5 жыл бұрын
Thanks so much again. Very useful and very easy to understand!
@ParametricHouse
5 жыл бұрын
🙏
@galiafvelikiy4615
5 жыл бұрын
Right on time! I had had a one question, and u gave an answer, thanks! :)
@ParametricHouse
5 жыл бұрын
🙏
@gyeongripark5967
5 жыл бұрын
The best tutorial. Thank you so much.
@djahnrathernotsay6271
3 жыл бұрын
Another awesome video - THANK YOU
@helplin1886
2 жыл бұрын
Thanks for watching!! I've got something really big! i want to introduce you to 🔆🛎 🔔🔔 What’sapp✙①⓸⓶⓷⓸⓪⑤⓷⑥⑤①☎️.
@Raghav_41
5 жыл бұрын
Very informative video.. Thanks
@ParametricHouse
5 жыл бұрын
🙏
@PristineFiber
6 ай бұрын
Amazing
@OJA-xb6it
2 жыл бұрын
Could we do a similar thing for 3D volumes ??
@ilijamajcen5426
2 жыл бұрын
thank you
@TheVichosss
2 жыл бұрын
Grande master!
@ParametricHouse
2 жыл бұрын
Thank you
@mateuszkowa5562
3 жыл бұрын
Thanks men
@helplin1886
2 жыл бұрын
Thanks for watching!! I've got something really big! i want to introduce you to 🔆🛎 🔔🔔 What’sapp✙①⓸⓶⓷⓸⓪⑤⓷⑥⑤①☎️.
@zhangtongchu9747
5 жыл бұрын
thanks ,it is great
@sparky-makes8373
4 жыл бұрын
Thank you! this is very helpful, is there away to round the cells out to one face of the pattern?
@michelechen2770
2 жыл бұрын
When I highlight everything and turn off preview, everything disappears?
@felixrothermel
4 жыл бұрын
amazing tutorial!! is such a thing possible in a 3d object?
@helplin1886
2 жыл бұрын
Thanks for watching!! I've got something really big! i want to introduce you to 🔆🛎 🔔🔔 What’sapp✙①⓸⓶⓷⓸⓪⑤⓷⑥⑤①☎️.
@diegovallve6129
4 жыл бұрын
I have a problem, when I add other me slider it seems yo overlap the voronoi with another voronoi I don't know how to fix it. Btw, thanks for the vid
@ParametricHouse
4 жыл бұрын
Thanks :) You have to Flatten somewhere maybe!
@diegovallve6129
4 жыл бұрын
Thanks, I will try it
@giovannirojas9543
3 жыл бұрын
I have the same problem. did you solve it?
@diegovallve6129
3 жыл бұрын
@@giovannirojas9543 one year later, and nothing hahaha
@giovannirojas9543
3 жыл бұрын
@@diegovallve6129 ya lo solucione. Gracias. Mantener presionado el teclado shift y listo
@paulafrias95
3 жыл бұрын
how can I make this same wall model with attractors vertical ?
@nuruslu1328
Ай бұрын
can we attract the cells towards a curve that's formed on 3 dimensions?
@VPhanindraBogu
4 жыл бұрын
Nice Work, Can I use the hexagon instead of Voronoi ?. if it possible kindly give some suggestions.
@ParametricHouse
4 жыл бұрын
I think it's going to be more complicated! Maybe a dual mesh can help !
@michelechen2770
2 жыл бұрын
Is it possible to put a voronoi pattern on a circle instead of a rectangle?
@ParametricHouse
2 жыл бұрын
You can simply trim the cells with a cirlce 👋
@michelechen2770
2 жыл бұрын
@@ParametricHouse how can I do that? 😅
@luzedithpaniaguamendez1431
4 жыл бұрын
cuando coloco 2 cables en el voronoi uno de ellos se desconecta que puedo hacer ??
@juan1981trejo
4 жыл бұрын
manten presionada la tecla shift asta que lo conectes
@giovannirojas9543
3 жыл бұрын
@@juan1981trejo muchas gracias campeon
@ironflav
3 жыл бұрын
If we want to do this on the component voronoi 3D do we have to change any components ? such as instead of using boundary surface for a curve should we use something else ? thanks a lot !
@helplin1886
2 жыл бұрын
Thanks for watching!! I've got something really big! i want to introduce you to 🔆🛎 🔔🔔 What’sapp✙①⓸⓶⓷⓸⓪⑤⓷⑥⑤①☎️.
@_AhmedSelim_
4 жыл бұрын
so helpfull ... but how to apply this on the surface of my model ?!!
@helplin1886
2 жыл бұрын
Thanks for watching!! I've got something really big! i want to introduce you to 🔆🛎 🔔🔔 What’sapp✙①⓸⓶⓷⓸⓪⑤⓷⑥⑤①☎️.
@TheOperatorV
3 жыл бұрын
Thanks! Is it also possible in this way for Voronoi3D?
@helplin1886
2 жыл бұрын
Thanks for watching!! I've got something really big! i want to introduce you to 🔆🛎 🔔🔔 What’sapp✙①⓸⓶⓷⓸⓪⑤⓷⑥⑤①☎️.
@avivafort2200
5 жыл бұрын
hey.. how do you account for accumulation of error when you're laser cutting?
@ParametricHouse
5 жыл бұрын
What do you mean by error? The accuracy depends on the lasercut machine
@Rizwaan122
2 жыл бұрын
13:00
@bassamahmed5965
3 жыл бұрын
I am a beginner and don't know how to apply this on a 3d surface
@helplin1886
2 жыл бұрын
Thanks for watching!! I've got something really big! i want to introduce you to 🔆🛎 🔔🔔 What’sapp✙①⓸⓶⓷⓸⓪⑤⓷⑥⑤①☎️.
@khennababdelghani7122
Жыл бұрын
Plz help I wanna do a nurb curve to 3d populate voronoi i need to convert the polyhedrons that i get from 3d voronoi to shapaes that have nurb vurves
@alperenkalkan4170
2 жыл бұрын
Is it possible to use this pattern or connect it to the facade we've already created?
@bra9933
Жыл бұрын
That was amazing! Thank you so much!
@diegoarmendariz6795
3 жыл бұрын
What can I do if i set the boundary and the voronoi don´t respect the boundary
@helplin1886
2 жыл бұрын
Thanks for watching!! I've got something really big! i want to introduce you to 🔆🛎 🔔🔔 What’sapp✙①⓸⓶⓷⓸⓪⑤⓷⑥⑤①☎️.
@FerReyesCreative
4 жыл бұрын
i made it step by step and it was just amazing, thanks for sharing, saludos y muchas gracias
@giovannirojas9543
3 жыл бұрын
hola, me podrias ayudar? cuando hago el enlace de populate geometry (circle) a point de voronoi me borra el otro enlace de populate geometry (que viene de plane surface) ayudaaaaaa
Пікірлер: 75