Love that music… Oh yeah baby, Issac Hayes coming’ at ya!
@E_L1000
2 ай бұрын
Feedback: * You used the wrong side of the flush cutter. * You don’t need to power the GW from the internal power supply. * You could press on an extra floppy drive connector to the original flat cable.
@STAR-fn1pi
Жыл бұрын
neat
@richardwaters9284
11 ай бұрын
I don’t understand. I use my greaseweazel with a 5.25 drive also. Like you I have an external 12 v molex connector going to the floppy. But I have nothing going into the 4 pin power header on the greaseweazel. The pcb draws power over usb. The greaseweazel v4 wiki says the 4 pin header is for 5v power out to use with a 3.5 drive. Why are you putting power into it?
@TexasEngineer
9 ай бұрын
The connector on the Greasweazel is for the 3.5 floppy not the 5.25. I would not connect the Greaseweazel to the case power. Why in the world do people need a Greaseweazel for a 3.5 floppy drive when you can buy a 3.5 USB floppy drive, I have one, mysteries of life?
@richardwaters9284
9 ай бұрын
@@TexasEngineer I think one wold need to hook up the greaseweazel to a 3.5 if you were imaging/copying amiga disks or other 3.5 disks for retro systems?
@2kBofFun
6 ай бұрын
@@richardwaters9284 But they state some specialty systems are not supported, like Macintosh 800k, C64 and some synthesizers. For copying regular disk, you could also tweak an existing USB3,5 inch floppy and hook up its driver board to a 5,25.
Пікірлер: 7