You nailed it. I've installed this model 7 times now. The step most people miss is that you have to add the bumpers under the seat to raise the seat (slightly) when you install the bidet. In this video, you did point out that you had bumpers installed already. That's necessary, as the bidet will raise the BACK of the seat slightly. That's a problem, as it transfers weight (when you sit down) to the HINGE of the toilet seat. Over time, you can wear out or BREAK the hinge if you don't correct the imbalance. You need to support the seat (front, and near the back) at roughly the height of the seat hinge. That is why you install the bumpers. Amazon even sells this bidet as a set with some bumpers. Good idea to buy the set, if you don't already have the bumpers.
@michealbrowning3168
2 жыл бұрын
This exact set has bumpers included?
@blueconversechucks
Жыл бұрын
Good for you flagging this. It took maybe two years, but my seat cracked and broke over time because I didn't have the bumpers. I didn't even know about them when I bought the bidet but I realized the problem after the seat broke.
@kathrynlucas6451
Жыл бұрын
Wow! I was gonna pay a handyman ($80) to do this. Now I know I can do it myself. Thank you so much!!
@ethancanin
Жыл бұрын
Well done! I dropped a small washcloth and sponge down the nearly empty tank to sop up the remaining 1/4 cup H20 so I had no drips when I disconnected the fill line. Of course, retrieved them before proceeding. Also, broke a toilet seat by NOT following your directions to add the extra three bumpers...luckily easily replaced it with a wood grain model.
@victoryroussotte7596
3 жыл бұрын
I'm glad you're on my side...Can't live without a Bidet!
@DavidScrimshaw
2 жыл бұрын
Thank you! Your explanation is crystal clear.
@MichaelDrones58
3 жыл бұрын
Excellent that was a nice information my friend very informative what a great demonstration that's pretty awesome I enjoyed it I had to stop by and show my support your channel my friend and smash that like button and I watch the video all the way through I know what it means so I watched it every minute of it and I enjoyed it and I thank you for sharing it take care of my friend and I'll see you soon be safe and I hope you have a wonderful day USA
@luvofbacon401
3 жыл бұрын
This was extremely helpful. Done in 15 minutes. Thank you!
@amiraslifeusa2560
Жыл бұрын
Thank you so much .Your explanation is excellent and it helped so much in installing the bidet .blessings..
@courtneymccleskey8790
3 жыл бұрын
Thank you for sharing this, hard time with the hose to get on like you said. It worked better if you just use a lighter to soften the plastic to go over the stud. I'm running into leaking on the coupling, used tape. Any ideas man
@shanthanalur4714
Жыл бұрын
Thank you for the great video. Mine came with the nozzle separately, how do I fix it to the bidet? Can you please advise, thank you
@Ahahahahahah-bs6fn
3 жыл бұрын
Bro thank you for teaching me how to wipe my safari bro you a 🤴
@tisavarnado
6 күн бұрын
Can I ask what the riser like things are called and where I can purchase them, also I soaked the hose in semi hot water and it was easy to slip on please and thank you
@Static99
2 жыл бұрын
What’s the size of the white rubber washer? Lost it so I need a replacement but don’t know the size
@flowerpower8488
Жыл бұрын
Thank you This was very clear and helpful
@danestey3807
3 жыл бұрын
Excellent presentation!
@MyStutteringLife
6 ай бұрын
Thank you for this video
@sgee2175
Жыл бұрын
Thank you for you help. Done!
@MattRobloxYT1
3 жыл бұрын
Good job 👏
@Berrypancakes229
3 жыл бұрын
Good review 👍
@HeatherSanders-sh2zw
Жыл бұрын
It took a while for me to do because I forgot to put the washer on the adapter so had to take it off. But then I have a raised toilet seat I had to put on top of the bidet for my elderly mom. So it slants a bit downward. The main issue I’m having is that once I put the coupler on the hose back in the adapter and turned the water back on, it is leaking. I tightened as much as I could. What is the issue? Not tight enough? Do I need a man’s strength to really make it tight? For me, I got it as tight as it would go. Either I call in an expensive plumber just to tighten it or we can’t flush it without the water flow.
@VeriteSB
2 жыл бұрын
Super helpful fam. Thank you 🙏🏾
@jessicaclara572
2 жыл бұрын
Some sites say you have to turn off the T valve when not in use or else it’ll leak. Is that the case with this model?
@sainiwinarth
Жыл бұрын
Thank you so much
@bdfan936
Жыл бұрын
Can this unit be installed with a toilet safety rail already installed on the toilet seat?
@slugfleater
Жыл бұрын
What size coil connector do you have? I bought a 20" one
@josephine2597
3 жыл бұрын
Great!Thank you!
@keithrice9281
2 жыл бұрын
Thank you!
@lany_07gaming
3 жыл бұрын
Nice info.👍
@sharmaineyuson366
3 жыл бұрын
Hiii my younger brother loves your fidget spinner videos so much, do u still do giveawaysss
@upthe3936
3 жыл бұрын
Nice!
@Cbtm1877
3 жыл бұрын
so no ones gonna address the giant fart sound around 5:55 ??
@ILuvTrading
3 жыл бұрын
Lol that was from the water pipe. 😂
@RaviPaudel69
3 жыл бұрын
Awsome ;)
@eggiestoengenes6132
3 жыл бұрын
Hi just wanna ask why my disabled ipad cant connect to itunes huhu my little sister played with it
@Komal_US
3 жыл бұрын
I could not unscrew the hose connected to toilet. Its too tight. Plumbers are charging $165.00 to install a bidet.
@OracleSlurpee
2 жыл бұрын
Would you please provide some updates if you see any issues with bidet?
@ILuvTrading
2 жыл бұрын
It’s still perfect
@googleuser9266
3 жыл бұрын
😊😊👍🏻
@sachinrulz4109
3 жыл бұрын
Hello sir
@abuse6100
3 жыл бұрын
what happened to all those fidget spinners btw?
@sabrinasheikh5605
3 жыл бұрын
Plzz do a giveaway on spinner. And make me the winner plzzzz🙏🙏
Пікірлер: 46