That coolant spout you’re using looks awesome! Once you move away from your typical locline universal coolant spouts you know the operators are taking the process seriously.
@scottchappell3193
3 жыл бұрын
At the moment we are making ceramic fittings for medical parts, it's something used by doctors who operate on broken bones,we are doing 90,000 parts,I love working with ceramic it gives a different dimension to making parts from conventional materials
@scottleoncini9341
3 жыл бұрын
Awesome. Thanks for sharing.
@ankursharma1232
3 жыл бұрын
I would love to see the final product. What a great project to be working on.
@Azury90
3 жыл бұрын
I grind every day ceramic parts, we have also a s41 and much more studer grinders. some parts are currently at the iss Greetings from Germany
@TITANSofCNC
3 жыл бұрын
Love Germany😁😁😁
@Sebastian-ed5kt
3 жыл бұрын
@Azury90 bei welcher Firma arbeitest du? Ich bin gerade in der lehre zum Feinwerkmechaniker und lerne immer wieder gerne neue firmen/bereiche kennen.
@faroukmastercam4395
3 жыл бұрын
How do you chose your wheels is there a catalogue I can use it
@DCT_Aaron_Engineering
3 жыл бұрын
Absolutely amazing 🤩. That CNC grinding machine is incredible 👍🍻
@tomiester227
3 жыл бұрын
Fabulous video. Also glad to see the operator not waving his hands all over the place..Keep up the great videos. Learn a lot.
@georgiaguardian4696
3 жыл бұрын
Amazing pro job. Expert explanation.
@jadawg1973
3 жыл бұрын
Nice machine tool. It will take alot of a specific type of work to pay for it but nevertheless pretty cool! We have ground ceramic for many years using surface grinders, od, I'd, and jig.
@drage275
3 жыл бұрын
We plasma thermal spray Chrome Oxide ceramic to worn parts then grind back to original size. It firstly repairs the part but then dramatically increases the life of the part in the future. I'm curious about the peel grinding process, wouldnt mind seeing more in depth videos about techniques like that.
@jsfcharlie
3 жыл бұрын
I cut glass and ceramic for optics this is a place where shops can make big money tools and machines are not really that much more money I hope to see more on this pushed out to help the country
@alejandromelo23ify
3 жыл бұрын
Super awesome!!!
@LukasDubeda
3 жыл бұрын
Can you use ceramic dies for forming metal, like deep drawing, etc...?
@adambergendorff2702
3 жыл бұрын
great video!, I know you probably can't share, I would love to know how much some of these parts cost especially in very limited production runs.
@alexanderstroborg1805
3 жыл бұрын
I have a question regarding CNC-machining with grinding wheels. The precision has always made sense on let's say a conventional machining job like tungsten carbide on soft steel. However, abrasives like grinding wheels must eventually wear out and thus make them smaller. How can the machine account for the wheel getting smaller? Or are these effects negligible? Perhaps you calibrate the machine regularly?
@scottleoncini9341
3 жыл бұрын
When the wheel is dressed, the machine accounts for the wear of the wheel. Each job will vary depending on material and wheel requirements. Test runs determine how often the wheel needs to be dressed in order to maintain an accurate process.
@sasjadevries
3 жыл бұрын
What kind of mold did you just make? Is it an injection mold, or a stamp? Does it make plastic parts or metal parts? If this makes metal parts then I see the use-case for making this out of ceramic; and I see the use-case for this when making glass-filled plastic parts, but does a drinking cup wear down a mold that much, that you want it to be made out of a durable material?
@scottleoncini9341
3 жыл бұрын
A stamp/form. They are in a progressive series that spit out aluminum cans.
@faroukmastercam4395
3 жыл бұрын
How do you chose your wheels is there a catalogue I can use it
@timhess3405
3 жыл бұрын
I'm wondering how much this maschine costs, i don't think you ever mentioned it
@Anys1000
3 жыл бұрын
Literally in the title...
@TITANSofCNC
3 жыл бұрын
Think he is being sarcastic😜😂😂😂
@mikecounsell
3 жыл бұрын
Is that accurate to 1/10mm? 👌
@livadariudanut
3 жыл бұрын
you kidding ? :))
@erwanrc8117
3 жыл бұрын
Not even close lol, it's up to 1/10'000 mm
@matthewrobertson960
3 жыл бұрын
Why wouldn't you use a diamond wheel on a ferrous material? Are they more expensive compared to a aluminium oxide?
@sabot3502
3 жыл бұрын
diffusion
@iamthemostfamoushaha
3 жыл бұрын
Diffusion is correct. Steel and cast iron contain carbon. Diamond is simply said just compressed carbon, so there is a reaction in between the part and the disk.
@drage275
3 жыл бұрын
@@iamthemostfamoushaha Also generally Diamond wheels aren't as 'open' as the softer vitrified wheels, so you get a lot of heat being generated.
@anikidwolfy
3 жыл бұрын
More expensive and chemical diffusion you dont want to keep dressing down an expensive consumable if you can help it. And also the grit is to be taken into account of different grades.
@keyurdhaduksvlogs529
3 жыл бұрын
nice video #big cut on lathe
@jackstarsky3268
3 жыл бұрын
is this ceramic and the ceramic used to make fancy bowls, cups the same material? if so I am confused since ceramic breaks away so easily at slightest shock.
@silent_tofu7921
3 жыл бұрын
This looks like silicon nitride. Most ceramic dishware is silicon dioxide which is a weaker material, but all ceramics have a tendency to chip and crack.
@jackstarsky3268
3 жыл бұрын
@@silent_tofu7921 i see, thanks
@dylanshandley1246
3 жыл бұрын
@@jackstarsky3268 ceramics in general are normally really hard, and because of that hardness, they get really brittle, which is the main thing that determines whether or not a material is going to bend, or shatter and chip away under a particular load. Glass is a great example of this, normally, you don’t think of glass as a particularly “strong” material, but if you make it a thin wire, and use it to suspend and hold up a load, then it’s stronger then steel would be for that same diameter. For an example, the 40KG mirrors, that the LIGO instruments used to detect gravitational waves, are suspended by 4 0.4mm thick fused silica wires. That’s only about 6x the width of a human hair, and it’s holding up 40KG, with pure, fused glass.
@biostone
3 жыл бұрын
Hey guys. I now work for Eagle Machine. Need service or new machines? Give us a call. However, I want to just come visit. And so does a buddy of mine over at White Oak Radiator Services (John Hemus). We would love to just come and meet you guys.
@Sketch1994
3 жыл бұрын
I noticed that probably all your machines are Fanuc based (even the 1.7M$). Do you have any experience with Siemens controllers? Do you prefer Fanuc or simply the first machine was Fanuc and and you just rolled with it to keep the rest the same? I am asking because the place that hired me blindly got their first CNC and it has a Siemens control that I both love and hate. Some things are very intuitive and user friendly while others are very cryptical and make no sense while being as if they were translated from German by an 8 year old who didn't natively speak either language.
@scottleoncini9341
3 жыл бұрын
Stay tuned... we are getting a new grinder with a Siemens control in the next few months.
@sasjadevries
3 жыл бұрын
I've never seen anyone that has worked with both and prefers Fanuc over Siemens. Some prefer Siemens, some don't care and like both equally, and some have only worked with one. And if you feel like some feature doesn't make sense at your CNC controller, then know that that's normal, for every controller. Some features might make sense from a developer standpoint, but not make sense from a user standpoint.
@Sketch1994
3 жыл бұрын
@@sasjadevries I know that there is a ton of stuff the Siemens controller does that Fanuc based controllers don't but I have only worked with Haas controllers other than Siemens. It made a lot of sense machine wise but function wise Siemens is way ahead even in the most basic stuff while no matter how much Shopmill can suck it can do some things a machine shop might want without engaging in manual programming.
@KingKaspian
3 жыл бұрын
This looks like PVC :D Cudet with a Diamond Wheel XD
Пікірлер: 54