The visualization you gave for coarseness made it so much easier to understand, thank you!
@shopandmath
Жыл бұрын
Thank you and thank you for taking the time to comment. I much appreciate it.
@user-wf8je6up2i
5 ай бұрын
i inherited a whole bunch of grinding wheels this info will come in handy.
@freedomearthmoon1
Жыл бұрын
Thanks, I just purchased a bench grinder and never owned one before or used one much. I've been trying to decide if I need better wheels that the ones that came it and this helped me understand some things.
@shopandmath
Жыл бұрын
Thank you very much and also, thank you for taking the time to comment. It’s much appreciated.
@hayamastudio4504
6 ай бұрын
Thank you so much for this video, it saved me a ton of time. Appreciate you brother!
@shopandmath
6 ай бұрын
thank you for the nice comment and thank you for taking time to comment. It is much appreciated. Another great video to watch. If you can find it is made by Norton. It’s the seven factors of grinding.
@hayamastudio4504
6 ай бұрын
@@shopandmath Will definitely check that one out. Thank you for the guidance, truly appreciate people like you helping us young guys getting into the trades. Thank you again!
@compassprecision
4 жыл бұрын
Very informative video. Thanks for producing!
@shopandmath
4 жыл бұрын
thank you for taking the time to comment comments help fuel the the video creation engine :-)
@compassprecision
4 жыл бұрын
shop and math Absolutely. Trying to figure out ways to drive up comments on our own channel haha
@shopandmath
4 жыл бұрын
@@compassprecision doing what i can
@rickyserna1734
9 ай бұрын
Thank You
@shopandmath
9 ай бұрын
Thank you for commenting it as much appreciated
@rtkville
4 жыл бұрын
Good one Thanks. Very informative!
@shopandmath
4 жыл бұрын
thank you for watching Ray
@thapandev5136
2 ай бұрын
Thanks brother
@shopandmath
2 ай бұрын
Thank you for the nice comment and thank you for taking the time to comment into this much appreciated
@jackskalski3699
Жыл бұрын
Absolutely awesome information to a noob like me. One last item I'm missing is dressing the wheel. Do we dress all and are there different dressers for different wheels? :D
@shopandmath
Жыл бұрын
There are multiple different dressing methods. It also depends on the type of wheel that you have for your standard aluminum oxide which is your white grinding wheel? Truing and dressing are done at the same time with a diamond bit On a diamond wheel or CBN wheel truing and dressing are not done at the same time in most cases True a diamond or CBN will you will use a break dresser to true that same wheel. You will use dressing sticks to dress the wheel. If you look under my videos, I do have a diamond wheel dressing video. Hopefully this answers your question. Ray
@kevinkoller8493
Жыл бұрын
Great job!!!
@shopandmath
Жыл бұрын
Thank you And thank you for taking the time to comment. It’s much appreciated. Ray
@steran50
4 жыл бұрын
Thank you for a great video. Just a question - what wheel would you recommend for a manual surface grinder ?.
@shopandmath
4 жыл бұрын
there are 7 factors when choosing a grinding wheel since i do not know what you would like to cut I can not tell you what you should get if I wanted a general use wheel aluminum oxide (A) medium grain (46) medium bond (i to s) structure medium (7 to 11) bond type Vitrified (V)
@DK-vx1zc
Жыл бұрын
excellent
@raysfix
Жыл бұрын
Thank you for the nice comment and thank you for taking the time to comment. It’s much appreciated.
@stevek4451
3 жыл бұрын
Where could I get a diamond wheel like the one you used at the end of the video when you put the radius on the carbide toolbit? What are the specs on it and about how much would that cost please? Thank you.
@shopandmath
3 жыл бұрын
Before you switch to a diamond wheel I highly suggest you watch my video how to dress a Dimond wheel dress You can get cheap diamond wheels on Amazon for under $100 Don’t buy a diamond wheel getting dressing sticks Your wheel will not cut without it Ray
@Frankowillo
4 жыл бұрын
Thank you, that was very instructive. A couple of questions: Other than GC, will C and/or AZ and/or ASD and/or SD sharpen Carbide tools? Are the grain sizes you listed approximately equivalent to the standard grits of abrasive paper?
@shopandmath
4 жыл бұрын
I would only personally recommend CBN or diamond the price has come down to the point that its affordable now you will have more control and accuracy in your cut There are more grit sizes available for paper then grinding wheels you should get the close to the same finish with the same paper verses grinding wheel Ray
Пікірлер: 58