As always, thanks for a great video. Unfortunately, watching your videos always costs me money, since I purchase most everything you endorse! You're the best, thanks. Looking forward to you trying Griot's new electric sprayer, as to it's loudness and quality.
@ryansmall1224
6 жыл бұрын
I bought a gallon immediately after watching your video, I've never had a product do this you can see it encapsulating in micro beads and drop vertically. It's a perfect finish product especially if your in a hurry or don't have the time to take a wax or beadmaker and go over the whole car this griots does the job and I love it best purchase in a long time finally some progress in the game.
@autofanaticcars
6 жыл бұрын
yeah it is great. i cut my washes down in half and just did a 10 min wash video.
@Cruel_Shoes
5 ай бұрын
I’m 67 years old. And I have been looking for something like this for a long time. I was detailing cars before they even coined the word detail. So this is exactly what I was looking for and it’s much cheaper than the British stuff I can’t remember the name, that was shipped out on eBay. But it got held up prior to shipping and they said this was undeliverable. I have no idea why. But thank you.
@sl4983
5 жыл бұрын
I could definitely see the difference after you applied it. The shine was incredible.
@JackRR15
5 жыл бұрын
Holy shit I am sold. This is gonna be so perfect for weekly maintenance washes without breaking a sweat. And enforces and justifies my pressure washer purchases :)
@ronlk46
6 жыл бұрын
Finally had cooler temps in San Antonio, Texas. Had used the Griot’s Surface Wash, but this was my opportunity to use Griot’s Surface Wash and their Poly Gloss back-to-back. I’m impressed! Everything you said about both products and demonstrated in your Videos was absolutely true. Applied both using MTM Foam Cannon per directions. Used blower to remove excess water after using Surface Wash. Then rinsed Wash solution from the Foam Cannon and added Poly Gloss per directions and applied. Let it dwell for 2 to 3 minutes. Same reaction on my car as on your GT350 in the Video while dwelling. Rinsed, used my blower and dried using Griot’s PFM Towel and VO7. Sure did shorten detailing time!
@vectorr6651
5 ай бұрын
Dang it even changed the color of the car!!! Amazing! :)
@ericleibee7050
6 жыл бұрын
Looks freaking amazing! Damn, now I have to go buy this product. Thank you for testing these products.
@HEMi1995
3 жыл бұрын
The way I see it, it’s essentially a spray wax that’s applied via foam cannon. Just tried it out yesterday and I’m a big fan.
@mikea.7370
6 жыл бұрын
It would be interesting to see how it changes the characteristics of ceramic coatings after application. Looks really awesome on your mustang!
@rlr1080
6 жыл бұрын
Ordered a gallon each of this stuff. AF I appreciate all your honest candid reviews, keep up the good work. My lightning blue gt350 is looking great after following your suggestions and detailing methods.
@autofanaticcars
6 жыл бұрын
thanks for the feedback, keep it up. AF
@rlr1080
6 жыл бұрын
By the way I will buy a lot of your wheel cleaner also whenever you get it ready for showtime. The brake dust is real on the gt350. For the performance I don’t complain because they are the best brakes I’ve ever used. Although I’ll probably go the ceramic pad route when the originals wear out. I’m only at 400 miles on my gt350 so it will be a while haha. All your videos are great much appreciated. Whoever thumbs down are probably from competitors for the products you are reviewing. Results don’t lie, should be all thumbs up. I wish I lived closer to you as it looks like you do great work. It’s truly an art form some of your plastic repairs and interior work. It’s hard to find shops with this much dedication we’re I live (Michigan). I would feel safe leaving my car with you. Keep up the good work. 🤙🤙🤙
@Rodrizzzy
6 жыл бұрын
Where did you order?
@rlr1080
6 жыл бұрын
I ordered direct from griots website
@invictus-88jm64
6 жыл бұрын
I love the wind sound on the trees
@leoh.7160
6 жыл бұрын
For those asking. It looks like you can use this as a normal foam cannon dwell soap and also with the 2 bucket method. I'm not sure if both are needed or if agitation is needed after letting it dwell? And the poly foam is a spray on, let dwell for 2-3 minutes then rinse off and dry. I just ordered both from detailed image.
@klasseact6663
6 жыл бұрын
I have both the foaming surface wash and Poly Gloss on order right now, cant wait to get it. I already bought the IK 9 foamer from Auto Fanatic and its awesome, so needless to say I've got a long 5 week wait to try out the GG dynamic duo😁
@andrewciavatta9663
3 жыл бұрын
Wow, great video I have Been using Griots products for over 20 year's and they have always impress me. I was wondering are you using a deionizer when you apply there products? Keep up with the professional videos.
@donfinkey692
6 жыл бұрын
What beautiful GT350!
@Pghsfinest222
5 жыл бұрын
Safe to use with ceramic coatings?
@Tallnerdyguy
Жыл бұрын
Yes
@mr.f8420
6 жыл бұрын
Is the “fine streaks” maybe the rain drops hitting the car?
@75folarin
6 жыл бұрын
wow dis is a great finish i love it thks for dis video pls explore more and what a great guy u r
@jordans7746
5 жыл бұрын
Great video!!! So you spray it on, let it sit for how long? Then?? spray off with clean water and wipe dry with microfiber or what did you do off camera? Thanks!!!
@autofanaticcars
5 жыл бұрын
foam it quick, walk around the car and rinse off, if you wait to long it will oooze out of the crevices everywhere and streak badly
@rodneyyoung8215
6 жыл бұрын
Same here.... Auto Fanatic you cost me money and more money since I try to buy everything you endorse lol great video
@autofanaticcars
6 жыл бұрын
this is some good stuff, I shot my Q50Rs earlier and it is pouring out and water is flying off, also the windshield is cleaner than it has been in months with the wipers now.
@nexamax
6 жыл бұрын
Very interesting! So I heard you right: 1. Poly Foam 2. Blow dry 3. Touch up dry... NO - ZERO rinsing?
@SecretSauceyjuice
6 жыл бұрын
Styli F No. Still rinse. It just wasn't shown in the video.
@S4_QUATTROPOWER
6 жыл бұрын
Is this better than gloss works?
@sir.charlesfranklinowens6265
6 жыл бұрын
Excellent Video as always
@jcalvillo22
6 жыл бұрын
Waiting for your foam awesome video gnna pick some up when they restock
@autofanaticcars
6 жыл бұрын
Foam Cannon video might go live Friday if it shows up in time.
@dessertman1181
5 жыл бұрын
Thats great I live in Arizona and heat is always an issue when washing and detailing cars ?
@roc1rob593
6 жыл бұрын
Hey. Congrads on the website getting up and running. Any timeline on the wheel cleaner?
@paranormal_6lacktivity5.0
6 жыл бұрын
Definitely saw the difference.
@IMGONEIN60
6 жыл бұрын
Great video thanks for the info but I would like to see how both products perform on a vehicle with paint protection film????
@Joe-eg7ml
4 жыл бұрын
Do you have to dry it after using car wash foam in order to use the poly gloss? Can you just spray on poly gloss after washing off the car wash foam when wet?
@dolland
6 жыл бұрын
Applied this stuff 2 times on both mine and wife's cars, so I can tell for sure. This looks great initially, but over time the car gets dirty incredibly fast, discarding any advantages of a coating. Without it, a coated car looks "clean" much, much longer. Also, dust sticks to this thing in a way that a rain would not wash any of it away. Does anyone have a different experience with this?
@nolanbryan9195
6 жыл бұрын
Would have been nice to see it used on a car that wasn’t already spotless ?
@klasseact6663
6 жыл бұрын
That's what the foaming surface cleaner did, this is basically a final wash that makes the paint POP!
@BillyPipes
Жыл бұрын
So you didn't rinse it off?
@mugenrios2k
5 жыл бұрын
What power washer are you using?
@scottbilotta8324
4 жыл бұрын
Loving these videos! Can you put this in a bottle and dilute it to make it a drying aid?
@autofanaticcars
4 жыл бұрын
not really i have tried that and it was very sticky and residue left behind. you need to try my Auto Fanatic 007 Gloss Enhancer you will love it
@reggie_m45
6 жыл бұрын
Doesn't look any glossier then before. Your car always looks awesome
@oneofakindkev5259
5 жыл бұрын
Im not a mustang fan but that gt350 looked real good
@kevincummins5675
6 жыл бұрын
Are you able to use this product on a car that has been ceramic coating what would be the positive or negative ? Great video work!
@autofanaticcars
6 жыл бұрын
yes you can
@gunsmokezz
6 жыл бұрын
So many after care products out there after your wash. I just got the bead maker and will be trying that out. Then maybe I'll try this red stuff from griots. Not sure I would need it since my car is ppf, plus a sealant on top already
@autofanaticcars
6 жыл бұрын
did my other car earlier and its pouring the glass is incrediblel now, the windshield has never looked clearer in the rain.
@gherrera6665
6 жыл бұрын
How would you compare these 2 products to Geyon foam and Geyon bath+?
@Youknowitbby
4 жыл бұрын
How would you compare this to your 007 gloss enhancer?
@S.g248
6 жыл бұрын
I live in the EU and can’t find this product anywhere??????
@MIKEYSREVIEWS
4 жыл бұрын
That's interesting when I use the Chemical Guys HoneyDew after a while it just disappears completely. Had no idea.
@carybunker37
5 жыл бұрын
Would be interested in your opinion on using this as a drying aid, 0.5oz to 32oz water in a regular spray bottle.
@autofanaticcars
5 жыл бұрын
not using the poly anymore, you want the best drying aid pick up a bottle of my 007 Gloss Enhancer from my web store. the Poly gloss oozes out of cracks hours later leaving very bad streaks that are hard to remove like glue.
@ctetuning
4 жыл бұрын
I have a IK FOAMER 12 how many OZ of poly gloss should i use
@SuperWave420
5 жыл бұрын
I've seen a product do that be for; in a drive thru car wash.
@sl4983
5 жыл бұрын
How far away are you from the car when you spray it?
@ronlk46
6 жыл бұрын
Enjoyed watching the videos of both products. I ordered both products after watching 1st video. FedEx delivery scheduled for Tuesday, 31 July. Will let you know my impression. I also have not liked products that have tried to combine Wash & Shine into a single product. During the video you mentioned using as a dry agent while using you Griot’s PFM Towel. Is this something that is going to replace using Chemical Guys VO7?
@autofanaticcars
6 жыл бұрын
Ron I have a killer replacement for the V07 that will be sold on my site very soon which was formulated for me
@ronlk46
6 жыл бұрын
Auto Fanatic Great! I’ve am down to less than a pint of VO7. Won’t be ordering VO7 from Chemical Guys.
@ricbrn
6 жыл бұрын
Wheel Cleaner as a drying aide!!! haha j/k
@Dmocification
6 жыл бұрын
Thanks for the review! Can you try it in a Foam gun, the one that attached to a hose?
@Tallnerdyguy
Жыл бұрын
Yes, but higher ratio of soap
@leeanderson3363
6 жыл бұрын
Carnt find this griots boss system in uk!!
@robertosticca597
6 жыл бұрын
Mamma Mia ! Incredible! It’s got to be your goto wash now. Say goodbye to Chemical Guys I guess. This has to put your own personal wash soap product on hold now. I mean this is it, how can you get better then this?its like you said “game changer”. Guess your gonna have to concentrate on a VO7 development. Lol. Take care my friend.
@Pedroluvslupe
6 жыл бұрын
rob sticca I don’t think there is something better than v7
@aandj.detailing81jeeplife42
6 жыл бұрын
How about the hydrofoam from carpro? I think it does the same.. but I might be wrong
@SecretSauceyjuice
6 жыл бұрын
AandJ.Detailing81 Jeeplife Similar application. Different chemical make ups. I believe this uses polymers while Hydro2 uses sylixanes. Unless you have full shade cover or indoor facilities to wash your car I would avoid silica/sio2/sylixane wet application products. Even after you rinse, if the water droplets dry on the panel you end up with little ceramic water spots. Polymer products don't carry such a risk if you miss a few droplets. In short, for the average Joe washing his car in direct sunlight, Griot's poly is probably a better option.
@artagain8977
6 жыл бұрын
This guy's style/vids remind me of Chris Fix...
@poyo3582
6 жыл бұрын
Artagain more like Scott from Dallas paint correction and auto detailing
@osofast18stang54
6 жыл бұрын
So do you rinse this stuff off, that wasn’t shown. You just say that you dried it?
@autofanaticcars
6 жыл бұрын
rinse off yes. Il show you guys how il be doing it with the new Boss Cannon in a few more days
@robd3061
6 жыл бұрын
I'm wondering if these power washer applied foaming products, especially the Poly Gloss, will affect the driveway finish over time.
@autofanaticcars
6 жыл бұрын
with all the soap i use on my 200ft long driveway i would have ruined it by now so I can attest this is totally safe
@SecretSauceyjuice
6 жыл бұрын
If you have a normal concrete or asphalt driveway, it's going to be so porous that these soaps won't do a thing to them. Now if you have some sort of coated driveway, it may make it temporarily hydrophobic, but I don't think you're going to see any staining or change in the look of the surface over time.
@klasseact6663
5 жыл бұрын
In the mini IK Foamer, how much Poly Gloss would you add?
@runner4life1984
5 жыл бұрын
Klasse Act...It’s a 20-1 ratio. Griots told me in email that for a 24oz bottle, I can use up to 2oz of PG in my FC from Walmart. I doing the math Mine would be 22oz water to 2oz PG in total of 24oz of solution. Most foam cannons (FCs) are 32oz. So anything more than 2oz of PG would produce ALOT of foam BUT it’s a waste passed that. I learned hard way after 3oz PG that more time was spent rinsing the extra foam. I set my FC for Thick, Max Foam. My car has a 3 coats of R1 Ceramic Coatings and the PG really has made it shinier and hydrophobic to a point water looks like glass beads that slides right off. Poly Gloss is WORTH the money BUT use it wisely as it’s expensive and you only need 2oz max for a 32oz FC.
@dubvr6nos
5 жыл бұрын
I'm gonna start blew drying my car twice also instead of blow drying it if I'll get that sorta shine.
@classicdell
5 жыл бұрын
Can you mix the two like you do with chemical guys products?
@autofanaticcars
5 жыл бұрын
no it causes a huge issue after you wash and dry it seeps out from all crevices, door handles, mirrors, jambs and dries sticky and it hard to get off.
@beeslandscaping
6 жыл бұрын
Dam that shit looks amazing
@santi8751
4 жыл бұрын
How would you compare this to mastersons wash & shine
@autofanaticcars
4 жыл бұрын
Poly Gloss is incredible for what it is, it does not offer ANY cleaning action its just a gloss enhancing product that is quite expensive $$$$$
@santi8751
4 жыл бұрын
@@autofanaticcars Makes sense since it is part of griots boss system and the surface foaming wash self cleans really good . Well thank you for responding appreciate it
@wandabailey7498
5 жыл бұрын
Did u clay this car
@larsdahl6594
5 жыл бұрын
Vertical "streaks" equals bonding?
@autofanaticcars
5 жыл бұрын
according to their label yes but the trick to this product that i later learned is you need to work fast and you can not let it sit too long otherwise you get sticky ooze dripping out of all areas hours later. they are suppose to revise their label and instructions because the bottle i had last year kinda lends you to think the longer the wait the better but that causes many issues.
@JG1rn
6 жыл бұрын
Amazing. I'm buying some.
@JG1rn
6 жыл бұрын
I watched Griots video and they attached the polyfoam container directly to the foam cannon. Full strength no dilution. Is that the way its supposed to be used?
@autofanaticcars
6 жыл бұрын
only if you have their Foam Cannon, it is out of stock so you must mix as I show. I have a Boss Cannon OTW any day now,
@991carreras3
6 жыл бұрын
Hard to tell the results in a video the car was clean and had a nice shine before you even applid this stuff and it looked the same after.
@marcogomez3128
6 жыл бұрын
looks like the foam wash is not available on amazon
@ronlk46
6 жыл бұрын
I order both from Griot’s on Monday. Both will be delivered by FedEx Tuesday.
@iamLODD
5 жыл бұрын
Could u link what u use to dry ur car?
@autofanaticcars
5 жыл бұрын
I use the Griots PFM Drying towels here amzn.to/2XCoJB5
@darkman8022
6 жыл бұрын
So you spray the poly gloss on and blow dry no rinsing?
@wattsobx
6 жыл бұрын
Dark Man Same question here
@SecretSauceyjuice
6 жыл бұрын
Definitely still rinse. I hadn't even scrolled to the comments and immediately knew this was going to be an issue when I saw that step wasn't shown in the video.
@DJMARTIN73
6 жыл бұрын
WOW!!!
@rickroste6796
6 жыл бұрын
DUDDDEEE 3:38, that stuff turned your car red man!!!
@JTSBMW
6 жыл бұрын
How does this work in a foam gun?
@autofanaticcars
6 жыл бұрын
have not tried yet, will wait to do so for you guys
@HoosierDaddyDetailing
6 жыл бұрын
Chemical guys and Adam's are okay products... just ok... I know Griots has some great stuff but to compare to CG or Adam's isn't saying much. And 2 oz per use is a bit much if you ask me. That being said I'll have to try this out for myself and see how it compares to other Professional grade products... thanks for the video
@socalmx255
6 жыл бұрын
that pressure washer tho.
@milanjurich1526
6 жыл бұрын
Purchased yesterday for 20% off from Detailed Image
@mikeboyan7889
6 жыл бұрын
How did you get the 20% off?
@mohammedkarim7503
6 жыл бұрын
Wow
@D3D587
6 жыл бұрын
When are you getting the foam cannon?
@autofanaticcars
6 жыл бұрын
I hope today or tomorrow, I ordered it from a stocking distributor yesterday and i will do a detailed video on that.
@D3D587
6 жыл бұрын
I just came from the website. Says AVAILABLE 9/28/18.
@briankriegxr6409
6 жыл бұрын
So it's not the rain that's happening?
@dossegundos7145
6 жыл бұрын
Looked like a freaking red zebra ! 😄
@autofanaticcars
6 жыл бұрын
crazy stuff right? thats why I had to do my car to show you guys, the white Mustang was harder to see on camera.
@joebal9044
6 жыл бұрын
Dwell time before you dried it?
@autofanaticcars
6 жыл бұрын
4 minutes
@brandanhoward6090
6 жыл бұрын
Holy mother of God
@charlesowens4749
6 жыл бұрын
Larry a.k.a., "Ammo NYC," is coping you. Check out his new Brake caliper Video.
@autofanaticcars
6 жыл бұрын
i can do all of this custom stuff on my own in my own shop. 100% self sufficient in every possible skill, that is the AF!
@charlesowens4749
6 жыл бұрын
You are a true perfectionist.
@chrisrstt
5 жыл бұрын
it has fine streaks bc its rainning!!!!!
@NateSATheLegend
5 жыл бұрын
it's raining in the video, true, but the fine streaks have nothing to do with the rain, I use this product and it's just a property of the product
@Pedroluvslupe
6 жыл бұрын
I like the other one better im a big fan of foam so not this one
@autofanaticcars
6 жыл бұрын
this is meant for protection not thick foam they both are two very different products.
@Pedroluvslupe
6 жыл бұрын
Auto Fanatic do you think is better than v7?
@jimmyqballs
6 жыл бұрын
Do you think you'll try their Foaming Surface Prep when they get the bottle situation ironed out? I'm really curious about that
Пікірлер: 131