*Making a hardwood fence for the miter makes all the difference **MyBest.Tools** Tune the saw with a combination square. Adjust the laser so its in line.😂🤣😂🤣😂🤣😂🤣See the photos.Every part in this saw is adjustable.😎😭*
@grizzlymachines
2 жыл бұрын
The Classic 14'' Bandsaw - Grizzly G0555 has an approximate shipping weight of 199 lbs. You can find more details here: www.grizzly.com/products/grizzly-the-classic-14-bandsaw/g0555
@charlesbiller3674
4 жыл бұрын
Have had my 0555 for a little over a year now and LOVE it. One of several Grizzly purchases that I've made and don't regret.
@grizzlymachines
4 жыл бұрын
Good choice!
@davidjanuszewski5020
8 жыл бұрын
I have the G0555, Use it daily for over 6 years, only maintenance are the blade guide bearings, on average 4 bearings a year.. I don't use a riser(the 1hp motor struggles cutting 6" , it never will cut 10"). The table is a little narrow and the fence rails should be 4" longer. It has a terrible table angle-read-out back under the table.. Overall a very good machine, I recommend it to all wood workers starting out, I have out grown mine but I just can't give it up...
@leemichaels406
4 жыл бұрын
I have a G0555LX on order and it should be here in a few weeks or less. Foot print clear in the shop and dust collection in place and waiting...
@grizzlymachines
4 жыл бұрын
That is great to hear Lee. Thank you for your support. Please let us know how you like it after getting it all set up. ~Kevin
@aux1z11
9 жыл бұрын
Sweet I'm getting one of these. I was going to get a capstan or a ridged but not now. Great vid !!
@mortgagejeanie
Жыл бұрын
Need to buy this bandsaw and ship it to the Caribbean, need to know how much it weighs? Anyone...also will it work on the electricals in Jamaica/Caribbean.
@dnarentz1377
5 жыл бұрын
You said 6” (thickness) wood will cut. What types of wood, hard (oak, cherry) or soft(pine, cypress,cedar)?
@grizzlymachines
5 жыл бұрын
All of the above :)
@Rottramon
11 жыл бұрын
Hello. I'm from Greece and i really like your 14" deluxe band saw. You should have a shop in Europe...
@Love2FlyKAP
11 жыл бұрын
Anyway you could do a video on the 2 wood/metal cutting bandsaws? I am looking to purchase one of them. ~KAP Keep the videos coming! They are so helpful.
@86c5corvette
9 жыл бұрын
whats the advantages of running it on 220v instead of 120v
@LabGecko
9 жыл бұрын
Charlie Thompson Power. 110v tops out at around 1.5 hp.
@86c5corvette
9 жыл бұрын
but the motor is rated at 1hp. is it worth it for me to run a 220v outlet to run it on i can easily run a 220v outlet to it and the same for my table saw
@LabGecko
9 жыл бұрын
Charlie Thompson At 1hp, no I wouldn't think it's worth it. From my experience (I've rewired my old table saw for 220V), above 1hp running at 220V helps prevent bogging down if you push the motor's limits, but be aware that this also means it's possible to burn the motor out if you overstress it. With the extra power _you_ are the limiting factor, not it.
@86c5corvette
9 жыл бұрын
ok thanks for your help
@horseblinderson4747
9 жыл бұрын
Amps most 120 circuit are 15 amps most 220 are 20 + amps but using 220 you're using half the amps and less chance of blowing a breaker.
@benderbear8243
3 жыл бұрын
Great Video! Thanks
@chrishachet8622
7 жыл бұрын
Watched this again, really nice saw!
@henrysscrollsawworks6367
3 жыл бұрын
can i put a 3horse power on the g0555 lanv thanks for your help
@grizzlymachines
3 жыл бұрын
Hi Lawrence! It is not recommended to attach a 3HP to the G0555. Thank you for reaching out! Our Tech Department should be able to assist you with any further questions, and they're reachable here: www.grizzly.com/contact
@58belvedere
9 жыл бұрын
I have a G0555 it's a work horse I use it all the time I would buy one again knowing what I know about it!
@eviedechant
7 жыл бұрын
Why is my 1/4 in blade riding off the front of the lower wheel? I have tried tracking and tension adjusting
@generalapps1399
16 күн бұрын
Same here tension issues on the 555p
@ZeldaFrEaK21354
12 жыл бұрын
Does the G0555 cut metal? o_o
@Piitter2000
9 жыл бұрын
Do you sell/ship these saws or any other of tour tools to Finland?
@grizzlyindustrial8257
9 жыл бұрын
Piitter2000 Yes we can ship to Finland. Please contact our Foreign Orders Department and they can send you details. ord@grizzly.com.
@fernandogonzalez-gl3nq
3 жыл бұрын
Donde puedo conseguir una y cuanto vale urge
@grizzlymachines
3 жыл бұрын
Hola Fernando! El G0555 cuesta $ 795 USD en Grizzly.com, lo mejor por su precio. ¡Qué tengas un lindo día!
@fernandogonzalez-gl3nq
Жыл бұрын
Gracias
@KountryCuz1
5 жыл бұрын
MY GO555 Bearings have lock up on the Blade Guides !!!!!!!!!!!!!
@grizzlymachines
5 жыл бұрын
Oh no! You can find the parts list here: www.grizzly.com/products/Grizzly-The-Ultimate-14-Bandsaw/G0555 either part #82 or part #128 will work for you
@henrysscrollsawworks6367
3 жыл бұрын
its the 30 anv
@wadepatton2433
5 жыл бұрын
"110220v single phase power" Oh so that's what the kids are calling it these days.
Пікірлер: 43